P6KE33AG [ROCHESTER]
600W, UNIDIRECTIONAL, SILICON, TVS DIODE, LEAD FREE, PLASTIC, SURMETIC40, CASE 017AA-01, 2 PIN;
| 型号： | P6KE33AG |
| 厂家： | 
Rochester Electronics |
| 描述： | 600W, UNIDIRECTIONAL, SILICON, TVS DIODE, LEAD FREE, PLASTIC, SURMETIC40, CASE 017AA-01, 2 PIN 局域网 二极管 电视 |
| 文件： | 总6页 (文件大小：806K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P6KE6.8A Series
600 Watt Peak Power
Surmetict-40 Transient
Voltage Suppressors
Unidirectional*
The P6KE6.8A series is designed to protect voltage sensitive
components from high voltage, high energy transients. They have
excellent clamping capability, high surge capability and fast response
time. These devices are ON Semiconductor’s exclusive,
cost-effective, highly reliable Surmeticꢀ axial leaded package and is
ideally-suited for use in communication systems, numerical controls,
process controls, medical equipment, business machines, power
supplies and many other industrial/consumer applications.
http://onsemi.com
Cathode
Anode
Features:
• Working Peak Reverse Voltage Range − 5.8 to 171 V
• Peak Power − 600 W @ 1 ms
• ESD Rating of Class 3 (>16 KV) per Human Body Model
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage < 5 mA above 10 V
AXIAL LEAD
CASE 017AA
PLASTIC
• Maximum Temperature Coefficient Specified
• UL 497B for Isolated Loop Circuit Protection
• Response Time is Typically < 1 ns
• Pb−Free Packages are Available*
Mechanical Characteristics:
MARKING DIAGRAM
CASE: Void-free, Transfer-molded, Thermosetting plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM LEAD TEMPERATURE FOR SOLDERING:
260ꢁC, 1/16″ from the case for 10 seconds
POLARITY: Cathode indicated by polarity band
MOUNTING POSITION: Any
A
P6KE
xxxA
YYWW
ꢂ
ꢂ
MAXIMUM RATINGS
Rating
Symbol
Value
600
Unit
W
A
= Assembly Location
P6KExxxA = Device Number
Peak Power Dissipation (Note 1) @ T ≤ 25°C
P
PK
L
YY
WW
ꢂ
= Year
= Work Week
= Pb−Free Package
Steady State Power Dissipation
P
D
5.0
W
@ T ≤ 25°C, Lead Length = 3/8 in
L
Derated above T = 50°C
50
20
mW/°C
°C/W
A
L
(Note: Microdot may be in either location)
Thermal Resistance, Junction−to−Lead
R
q
JL
Forward Surge Current (Note 2) @ T = 25°C
I
100
A
FSM
ORDERING INFORMATION
Operating and Storage Temperature Range
T , T
− 55 to
+150
°C
J
stg
†
Device
P6KExxxA
P6KExxxAG
Package
Shipping
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
Axial Lead
1000 Units / Box
1000 Units / Box
Axial Lead
(Pb−Free)
1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per
A
P6KExxxARL
Axial Lead 4000/Tape & Reel
Figure 2.
P6KExxxARLG
Axial Lead 4000/Tape & Reel
(Pb−Free)
2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses
per minute maximum.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
©
Semiconductor Components Industries, LLC, 2009
1
Publication Order Number:
October, 2009 − Rev. 10
P6KE6.8A/D
P6KE6.8A Series
ELECTRICAL CHARACTERISTICS (T = 25°C unless
A
otherwise noted, V = 3.5 V Max. @ I (Note 6) = 50 A)
I
F
F
Symbol
Parameter
I
F
I
Maximum Reverse Peak Pulse Current
Clamping Voltage @ I
PP
V
C
PP
V
Working Peak Reverse Voltage
RWM
V
C
V
V
BR RWM
V
I
R
Maximum Reverse Leakage Current @ V
RWM
I
V
F
R
T
I
V
Breakdown Voltage @ I
Test Current
BR
T
I
T
QV
Maximum Temperature Coefficient of V
Forward Current
BR
BR
I
PP
I
F
V
F
Forward Voltage @ I
F
Uni−Directional TVS
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted, V = 3.5 V Max. @ I (Note 6) = 50 A)
A
F
F
Breakdown Voltage
V (Note 4) (V)
BR
V @ I (Note 5)
C PP
V
RWM
@ I
V
C
I
PP
(Note 3)
I
R
@ V
QV
BR
T
RWM
Device
V
mA
Min
Nom
Max
mA
V
A
%/°C
Marking
Device*
P6KE6.8A, G
P6KE7.5ARLG
P6KE6.8A
P6KE7.5A
5.8
6.4
1000
500
6.45
7.13
6.80
7.51
7.14
7.88
10
10
10.5
11.3
57
53
0.057
0.061
P6KE10AG
P6KE12A, G
P6KE13AG
P6KE10A
P6KE12A
P6KE13A
8.55
10.2
11.1
10
5
5
9.5
11.4
12.4
10
12
13.05
10.5
12.6
13.7
1
1
1
14.5
16.7
18.2
41
36
33
0.073
0.078
0.081
P6KE15AG
P6KE16A, G
P6KE18AG
P6KE20ARLG
P6KE15A
P6KE16A
P6KE18A
P6KE20A
12.8
13.6
15.3
17.1
5
5
5
5
14.3
15.2
17.1
19
15.05
16
18
15.8
16.8
18.9
21
1
1
1
1
21.2
22.5
25.2
27.7
28
27
24
22
0.084
0.086
0.088
0.09
20
P6KE22ARLG
P6KE24ARLG
P6KE27ARLG
P6KE30ARLG
P6KE22A
P6KE24A
P6KE27A
P6KE30A
18.8
20.5
23.1
25.6
5
5
5
5
20.9
22.8
25.7
28.5
22
24
27.05
30
23.1
25.2
28.4
31.5
1
1
1
1
30.6
33.2
37.5
41.4
20
18
16
0.092
0.094
0.096
0.097
14.4
P6KE33AG
P6KE36AG
P6KE39AG
P6KE43AG
P6KE33A
P6KE36A
P6KE39A
P6KE43A
28.2
30.8
33.3
36.8
5
5
5
5
31.4
34.2
37.1
40.9
33.05
36
39.05
43.05
34.7
37.8
41
1
1
1
1
45.7
49.9
53.9
59.3
13.2
12
11.2
10.1
0.098
0.099
0.1
45.2
0.101
P6KE47AG
P6KE51AG
P6KE56AG
P6KE62ARLG
P6KE47A
P6KE51A
P6KE56A
P6KE62A
40.2
43.6
47.8
53
5
5
5
5
44.7
48.5
53.2
58.9
47.05
51.05
56
49.4
53.6
58.8
65.1
1
1
1
1
64.8
70.1
77
9.3
8.6
7.8
7.1
0.101
0.102
0.103
0.104
62
85
P6KE68AG
P6KE68A
P6KE75A
P6KE82A
P6KE91A
58.1
64.1
70.1
77.8
5
5
5
5
64.6
71.3
77.9
86.5
68
75.05
82
71.4
78.8
86.1
95.5
1
1
1
1
92
6.5
5.8
5.3
4.8
0.104
0.105
0.105
0.106
P6KE75ARLG
P6KE82ARLG
P6KE91ARLG
103
113
125
91
P6KE100ARLG
P6KE120ARLG
P6KE130AG
P6KE100A
P6KE120A
P6KE130A
85.5
102
111
5
5
5
95
114
124
100
120
130.5
105
126
137
1
1
1
137
165
179
4.4
3.6
3.3
0.106
0.107
0.107
P6KE150AG
P6KE150A
P6KE160A
P6KE180A
P6KE200A
128
136
154
171
5
5
5
5
143
152
171
190
150.5
160
180
158
168
189
210
1
1
1
1
207
219
246
274
2.9
2.7
2.4
2.2
0.108
0.108
0.108
0.108
P6KE160ARLG
P6KE180ARLG
P6KE200A, G
200
3. A transient suppressor is normally selected according to the maximum working peak reverse voltage (V
greater than the dc or continuous peak operating voltage level.
), which should be equal to or
RWM
4. V measured at pulse test current I at an ambient temperature of 25°C
BR
T
5. Surge current waveform per Figure 4 and derate per Figures 1 and 2.
6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
*The “G’’ suffix indicates Pb−Free package or Pb−Free Packages are available.
http://onsemi.com
2
P6KE6.8A Series
100
10
ꢁ
NONREPETITIVE PULSE
WAVEFORM SHOWN IN
FIGURE 4
100
80
60
1
40
20
0
0.1
0.1 ms
0
25
50
75 100 125 150 175 200
1 ms
10 ms
100 ms
1 ms
10 ms
t , PULSE WIDTH
P
T , AMBIENT TEMPERATURE (ꢁC)
A
Figure 2. Pulse Derating Curve
Figure 1. Pulse Rating Curve
PULSE WIDTH (t ) IS
p
DEFINED AS THAT
t ≤ 10 ms
r
POINT WHERE THE
PEAK CURRENT
10,000
1000
PEAK VALUE − I
PP
100
50
0
DECAYS TO 50% OF I
.
PP
MEASURED @
ZERO BIAS
I
PP
2
HALF VALUE −
MEASURED @
100
10
V
RWM
t
P
0
1
2
3
4
0.1
1
10
100
1000
t, TIME (ms)
V , BREAKDOWN VOLTAGE (VOLTS)
BR
Figure 4. Pulse Waveform
Figure 3. Capacitance versus Breakdown Voltage
1
0.7
0.5
3/8″
3/8″
0.3
0.2
5
PULSE WIDTH
10 ms
4
3
0.1
0.07
0.05
1 ms
2
1
0.03
0.02
100 ms
10 ms
0.01
0
0
0.1 0.2
0.5
1
2
5
10
20
50 100
25
50
75 100 125 150 175 200
D, DUTY CYCLE (%)
T , LEAD TEMPERATURE ꢁC)
L
Figure 5. Steady State Power Derating
Figure 6. Typical Derating Factor for Duty Cycle
http://onsemi.com
3
P6KE6.8A Series
APPLICATION NOTES
RESPONSE TIME
suppressor device as close as possible to the equipment or
components to be protected will minimize this overshoot.
In most applications, the transient suppressor device is
placed in parallel with the equipment or component to be
protected. In this situation, there is a time delay associated with
the capacitance of the device and an overshoot condition
associated with the inductance of the device and the inductance
of the connection method. The capacitance effect is of minor
importance in the parallel protection scheme because it only
produces a time delay in the transition from the operating
voltage to the clamp voltage as shown in Figure 7.
The inductive effects in the device are due to actual turn-on
time (time required for the device to go from zero current to full
current) and lead inductance. This inductive effect produces an
overshoot in the voltage across the equipment or component
being protected as shown in Figure 8. Minimizing this
overshoot is very important in the application, since the main
purpose for adding a transient suppressor is to clamp voltage
spikes. The P6KE6.8A series has very good response time,
typically < 1 ns and negligible inductance. However, external
inductive effects could produce unacceptable overshoot.
Proper circuit layout, minimum lead lengths and placing the
Some input impedance represented by Z is essential to
in
prevent overstress of the protection device. This impedance
should be as high as possible, without restricting the circuit
operation.
DUTY CYCLE DERATING
The data of Figure 1 applies for non-repetitive conditions
and at a lead temperature of 25°C. If the duty cycle increases,
the peak power must be reduced as indicated by the curves of
Figure 6. Average power must be derated as the lead or ambient
temperature rises above 25°C. The average power derating
curve normally given on data sheets may be normalized and
used for this purpose.
At first glance the derating curves of Figure 6 appear to be
in error as the 10 ms pulse has a higher derating factor than the
10 ms pulse. However, when the derating factor for a given
pulse of Figure 6 is multiplied by the peak power value of
Figure 1 for the same pulse, the results follow the expected
trend.
TYPICAL PROTECTION CIRCUIT
Z
in
LOAD
V
in
V
L
V
in
(TRANSIENT)
OVERSHOOT DUE TO
INDUCTIVE EFFECTS
V
V
V
in
(TRANSIENT)
V
L
V
L
V
in
t
d
t
D
= TIME DELAY DUE TO CAPACITIVE EFFECT
t
t
Figure 8.
Figure 7.
UL RECOGNITION*
The entire series including the bidirectional CA suffix has
Underwriters Laboratory Recognition for the classification of
protectors (QVGQ2) under the UL standard for safety 497B
and File #E210057. Many competitors only have one or two
devices recognized or have recognition in a non-protective
category. Some competitors have no recognition at all. With
the UL497B recognition, our parts successfully passed several
tests including Strike Voltage Breakdown test, Endurance
Conditioning, Temperature test, Dielectric Voltage-Withstand
test, Discharge test and several more.
Whereas, some competitors have only passed a flammability
test for the package material, we have been recognized for
much more to be included in their protector category.
*Applies to P6KE6.8A − P6KE200A.
http://onsemi.com
4
P6KE6.8A Series
PACKAGE DIMENSIONS
SURMETIC 40, AXIAL LEAD
CASE 017AA−01
ISSUE O
NOTES:
1. CONTROLLING DIMENSION: INCH
2. LEAD DIAMETER AND FINISH NOT CONTROLLED
WITHIN DIMENSION F.
3. CATHODE BAND INDICATES POLARITY
B
INCHES
DIM MIN MAX
MILLIMETERS
MIN
8.38
3.30
0.94
---
MAX
8.89
3.68
1.09
1.27
31.75
D
A
B
D
F
0.330
0.130
0.037
---
0.350
0.145
0.043
0.050
K
A
F
K
1.000
1.250 25.40
F
K
Surmetic are trademarks of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
P6KE6.8A/D
相关型号：
P6KE33AG-Z15-R
Trans Voltage Suppressor Diode, 600W, 28.2V V(RWM), Unidirectional, 1 Element, Silicon, DO-15,
UTC
©2020 ICPDF网 联系我们和版权申明