UC2843D8
更新时间:2024-09-18 18:11:38
品牌:ROCHESTER
描述:1A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8
UC2843D8 概述
1A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8 开关式稳压器或控制器
UC2843D8 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 零件包装代码: | SOIC |
包装说明: | GREEN, PLASTIC, MS-012AA, SOIC-8 | 针数: | 8 |
Reach Compliance Code: | unknown | 风险等级: | 5.08 |
Is Samacsys: | N | 模拟集成电路 - 其他类型: | SWITCHING CONTROLLER |
控制模式: | CURRENT-MODE | 控制技术: | PULSE WIDTH MODULATION |
最大输入电压: | 25 V | 最小输入电压: | 8.2 V |
标称输入电压: | 15 V | JESD-30 代码: | R-PDSO-G8 |
JESD-609代码: | e4 | 长度: | 4.9 mm |
湿度敏感等级: | 1 | 功能数量: | 1 |
端子数量: | 8 | 最高工作温度: | 85 °C |
最低工作温度: | -40 °C | 最大输出电流: | 1 A |
标称输出电压: | 5 V | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | SOP | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE | 峰值回流温度(摄氏度): | 260 |
座面最大高度: | 1.75 mm | 表面贴装: | YES |
切换器配置: | SINGLE | 最大切换频率: | 500 kHz |
技术: | BICMOS | 温度等级: | INDUSTRIAL |
端子面层: | NICKEL PALLADIUM GOLD | 端子形式: | GULL WING |
端子节距: | 1.27 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 宽度: | 3.9 mm |
Base Number Matches: | 1 |
UC2843D8 数据手册
通过下载UC2843D8数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
CURRENT MODE PWM CONTROLLER
FEATURES
DESCRIPTION
•
Optimized For Off-line and DC-to-DC
Converters
The UC1842/3/4/5 family of control devices provides
the necessary features to implement off-line or
dc-to-dc fixed frequency current mode control
•
•
•
•
•
•
•
•
•
•
Low Start-Up Current (<1 mA)
Automatic Feed Forward Compensation
Pulse-by-Pulse Current Limiting
Enhanced Load Response Characteristics
Under-Voltage Lockout With Hysteresis
Double Pulse Suppression
schemes with
a minimal external parts count.
Internally implemented circuits include under-voltage
lockout featuring start up current less than 1 mA, a
precision reference trimmed for accuracy at the error
amp input, logic to insure latched operation, a PWM
comparator which also provides current limit control,
and a totem pole output stage designed to source or
sink high peak current. The output stage, suitable for
driving N-Channel MOSFETs, is low in the off state.
High Current Totem Pole Output
Internally Trimmed Bandgap Reference
500-kHz Operation
Differences between members of this family are the
under-voltage lockout thresholds and maximum duty
cycle ranges. The UC1842 and UC1844 have UVLO
thresholds of 16 VON and 10 VOFF, ideally suited to
off-line applications. The corresponding thresholds
for the UC1843 and UC1845 are 8.4 V and 7.6 V.
The UC1842 and UC1843 can operate to duty cycles
approaching 100%. A range of zero to 50% is
obtained by the UC1844 and UC1845 by the addition
of an internal toggle flip flop which blanks the output
off every other clock cycle.
Low RO Error Amp
BLOCK DIAGRAM
V
cc
7 12
UVLO
34 V
5 V
REF
S/R
8 14
5
4
9
7
GROUND
V
REF
5 V
50 mA
2.50 V
Internal
BIAS
VREF
Good
Logic
7
11
V
C
OSC
R /C
T
T
6
10
T
Error
Amp
OUTPUT
S
2R
R
5
8
PWM
LATCH
2
1
3
3
1
5
V
FB
R
POWER
GROUND
1 V
CURRENT
SENSE
COMP
COMPARATOR
CURRENT
SENSE
Note 1:
Note 2:
A = DIL−8 Pin Number. B = SO−14 and CFP−14 Pin Number.
Toggle flip flop used only in 1844 and 1845.
A/B
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1997–2007, Texas Instruments Incorporated
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
ABSOLUTE MAXIMUM RATINGS(1)
UNIT
Low impedance source
30 V
Self Limiting
±1 A
Supply voltage
ICC < 30 mA
Output current
Output energy (capacitive load)
Analog inputs (Pins 2, 3)
Error amp output sink current
5 µJ
–0.3 V to 6.3 V
10 mA
TA≤ 25°C (DIL-8)
1 W
Power dissipation
TA≤ 25°C (SOIC-14)
TA≤ 25°C (SOIC-8)
725 mW
650 mW
Storage temperature range
Junction temperature range
–65°C to 150°C
–55°C to 150°C
300°C
Lead temperature (soldering, 10 seconds)
(1) All voltages are with respect to Pin 5. All currents are positive into the specified terminal. Consult Packaging Section of Databook for
thermal limitations and considerations of packages.
CONNECTION DIAGRAMS
DIL-8, SOIC-8
N or J PACKAGE, D8 PACKAGE
PLCC-20
Q PACKAGE
(TOP VIEW)
(TOP VIEW)
COMP
V
V
1
2
3
4
8
7
6
5
REF
V
FB
SENSE
CC
I
OUTPUT
GROUND
R /C
T
T
3
2 1 20 19
V
V
NC
18
17
16
15
14
4
5
6
7
8
CC
SOIC-14, CFP-14
D or W PACKAGE
(TOP VIEW)
V
FB
C
NC
OUTPUT
NC
NC
I
SENSE
1
2
3
4
5
6
7
14
13
12
11
10
9
V
REF
COMP
NC
NC
NC
V
9 10 11 12 13
V
FB
CC
V
C
NC
OUTPUT
GROUND
PWR GND
I
SENSE
NC
8
R /C
T
T
NC − No internal connection
2
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
THERMAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PACKAGE
θJC
28(1)
25
θJA
DIL-8
J
N
125-160
110(2)
SOIC-8
D8
D14
W
42
84-160(2)
50-120(2)
175.4C/W
43-75(2)
SOIC-14
CFP-14
PLCC-20
35
5.49°C/W
34
Q
(1) θJC data values stated were derived from MIL-STD-1835B.
(2) Specified θJA (junction to ambient) is for devices mounted to 5 in2 FR4 PC board with one ounce copper where noted. When resistance
range is given, lower values are for 5 in2. Test PWB was 0.062 in thick and typically used 0.635-mm trace widths for power packages
and 1.3-mm trace widths for non-power packages with 100 x 100-mil probe land area at the end of each trace.
DISSIPATION RATINGS
TA≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA≤ 25°C
TA≤ 70°C
POWER RATING
TA≤ 85°CPO
WER RATING
TA≤ 125°C
POWER RATING
PACKAGE
W
700 mW
5.5 mW/°C
452 mW
370 mW
150 mW
ELECTRICAL CHARACTERISTICS
Unless otherwise stated, these specifications apply for –55°C ≤ TA≤ 125°C for the UC184X; –40°C ≤ TA≤ 85°C for the
UC284X; 0°C ≤ TA≤ 70°C for the 384X; VCC = 15 V(1); RT = 10 kΩ; CT = 3.3 nF, TA = TJ.
UC1842/3/4/5
UC3842/3/4/5
UC2842/3/4/5
PARAMETER
TEST CONDITIONS
UNIT
MIN
TYP MAX
MIN
TYP MAX
REFERENCE SECTION
Output Voltage
TJ = 25°C, IO = 1 mA
4.95
4.9
5.00
6
5.05
20
4.90
5.00
6
5.10
20
V
Line Regulation
12 ≤ VIN≤ 25 V
1 ≤ I0≤ 20 mA
mV
Load Regulation
Temp. Stability
6
25
6
25
(2)(3)
See
0.2
0.4
5.1
0.2
0.4 mV/°C
(2)
Total Output Variation
Output Noise Voltage
Long Term Stability
Output Short Circuit
OSCILLATOR SECTION
Initial Accuracy
Line, load, tempature
4.82
5.18
V
10 Hz≤ f ≤ 10 kHz, TJ = 25°C(2)
TA = 125°C, 1000 Hrs(2)
50
5
50
5
µV
mV
mA
25
25
–30
47
–100 –180
–30
47
–100 –180
TJ = 25°C(4)
52
0.2%
5%
57
52
0.2%
5%
57
kHz
V
Voltage Stability
12 ≤ VCC≤ 25 V
1%
1%
(2)
Temp. Stability
TMIN≤ TA≤ TMAX
(2)
Amplitude
VPIN 4 peak-to-peak
1.7
1.7
(1) Adjust VCC above the start threshold before setting at 15 V.
(2) These parameters, although specified, are not 100% tested in production.
(3) Temperature stability, sometimes referred to as average temperature coefficient, is described by the equation:
V
(max) * VREF (min)
REF
Temp Stability +
TJ(max) * TJ (min)
VREF(max) and VREF(min) are the maximum and minimum reference voltages measured over
the appropriate temperature range. Note that the extremes in voltage do not necessarily occur at the extremes in temperature.
(4) Output frequency equals oscillator frequency for the UC1842 and UC1843.
Output frequency is one half oscillator frequency for the UC1844 and UC1845.
3
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
ELECTRICAL CHARACTERISTICS (continued)
Unless otherwise stated, these specifications apply for –55°C ≤ TA≤ 125°C for the UC184X; –40°C ≤ TA≤ 85°C for the
UC284X; 0°C ≤ TA≤ 70°C for the 384X; VCC = 15 V; RT = 10 kΩ; CT = 3.3 nF, TA = TJ.
UC1842/3/4/5
UC3842/3/4/5
UC2842/3/4/5
PARAMETER
TEST CONDITIONS
UNIT
MIN
TYP MAX
MIN
TYP MAX
ERROR AMP SECTION
Input Voltage
VPIN 1 = 2.5 V
2.45
2.50
–0.3
90
2.55
–1
2.42
2.50
–0.3
90
2.58
–2
V
µA
Input Bias Current
AVOL
2 ≤ VO≤ 4 V
65
0.7
60
65
0.7
60
dB
(5)
Unity Gain Bandwidth
PSRR
TJ = 25°C
1
1
MHz
dB
12 ≤ VCC≤ 25 V
70
70
Output Sink Current
Output Source Current
VOUT High
VPIN 2 = 2.7 V, VPIN 1 = 1.1 V
VPIN 2 = 2.3 V, VPIN 1 = 5 V
VPIN 2 = 2.3 V, RL = 15 kΩ to ground
VPIN 2 = 2.7 V, RL = 15 kΩ to Pin 8
2
6
2
6
mA
V
–0.5
5
–0.8
6
–0.5
5
–0.8
6
VOUT Low
0.7
1.1
0.7
1.1
CURRENT SENSE SECTION
Gain
(6)(7)
See
2.85
0.9
3
1
3.15
1.1
2.85
0.9
3
1
3.15
1.1
V/V
V
(6)
Maximum Input Signal
PSRR
VPIN 1 = 5 V
(5)(6)
12 ≤ VCC≤ 25 V
70
70
dB
µA
ns
Input Bias Current
Delay to Output
OUTPUT SECTION
–2
–10
300
–2
–10
300
(5)
VPIN 3 = 0 V to 2 V
150
150
ISINK = 20 mA
0.1
1.5
0.4
2.2
0.1
1.5
0.4
2.2
Output Low Level
Output High Level
ISINK = 200 mA
ISOURCE = 20 mA
ISOURCE = 200 mA
V
13
12
13.5
13.5
50
13
12
13.5
13.5
50
(5)
Rise Time
Fall Time
TJ = 25°C, CL = 1 nF
TJ = 25°C, CL = 1nF(5)
150
150
150
150
ns
50
50
UNDER-VOLTAGE LOCKOUT SECTION
X842/4
15
7.8
9
16
8.4
10
17
9.0
11
14.5
7.8
8.5
7.0
16
8.4
10
17.5
9.0
Start Threshold
X843/5
V
X842/4
X843/5
11.5
8.2
Min. Operating Voltage After
Turn On
7.0
7.6
8.2
7.6
PWM SECTION
X842/3
X844/5
95%
46%
97% 100%
95%
47%
97% 100%
Maximum Duty Cycle
48%
50%
0%
48%
50%
0%
Minimum Duty Cycle
TOTAL STANDBY CURRENT
Start-Up Current
0.5
11
34
1
0.5
11
34
1
mA
V
Operating Supply Current
VCC Zener Voltager
VPIN 2 = VPIN 3 = 0 V
ICC = 25 mA
17
17
30
30
(5) These parameters, although specified, are not 100% tested in production.
(6) Parameter measured at trip point of latch with VPIN 2 = 0.
DVPIN 1
A +
, 0 v VPIN 3 v 0.8 V
DVPIN 3
(7) Gain defined as:
4
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
ERROR AMP CONFIGURATION
Error amp can source or sink up to 0.5 mA.
2.5 V
0.5 mA
+
_
V
FB
Z
I
2
1
COMP
Z
F
UNDER-VOLTAGE LOCKOUT
During under-voltage lock-out, the output drive is biased to sink minor amounts of current. Pin 6 should be
shunted to ground with a bleeder resistor to prevent activating the power switch with extraneous leakage
currents.
V
CC
V
CC
7
ON/OFF Command
to REST of IC
UC1842 UC1843
UC1844 UC1845
<17 mA
<1 mA
V
ON
16 V
10 V
8.4 V
7.6 V
V
OFF
V
CC
V
OFF
V
ON
CURRENT SENSE CIRCUIT
A small RC filter may be required to suppress switch transients.
ERROR
AMP
2R
I
S
R
1 V
CURRENT
SENSE
COMPARATOR
COMP
1
3
R
CURRENT
SENSE
C
5
R
S
GND
5
Peak Current (I ) is Determined By The Formula
S
,1.0 V
RS
I
SMAX
5
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
OSCILLATOR SECTION
V
8
4
5
REF
Timing Resistance vs Frequency
Deadtime vs C (R >5 kW)
T
T
R
T
30
10
3
100
30
R /C
T
T
C
T
10
3
1
GROUND
0.3
100
1 k
10 k 100 k
1 M
1
2.2 4.7 10 22 47 100
− nF
1.72
C
T
f − Frequency − Hz
For R > 5 K f
T
~
R C
T
T
OUTPUT SATURATION CHARACTERISTICS
4
V
= 15 V
CC
3
T
A
= 25°C
T
A
= −55°C
2
1
SOURCE SAT
(V
V
CC − OH)
SINK SAT (V
OL
)
0
.01
.02 .03 .04 .05 .07 .1
.2
.3 .4 .5 .7
1
Output Current, Source or Sink − A
ERROR AMPLIFIER OPEN-LOOP FREQUENCY RESPONSE
0
80
60
40
−45
−90
θ
−135
−180
20
Av
0
10
100
1 k
10 k
100 k
1 M
10 M
f − Frequency − Hz
6
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
OPEN-LOOP LABORATORY FIXTURE
High peak currents associated with capacitive loads necessitate careful grounding techniques. Timing and bypas
capacitors should be conected close to pin 5 in a single point ground. The transistor and 5k potentiometer are
used to sample the oscillator waveform and apply an adjustable ramp to pin 3.
V
REF
R1
2N2222
A
V
CC
UC1842
4.7 kW
100 kW
COMP
1
2
3
4
V
8
7
6
5
REF
0.1 mF
1 kW
ERROR AMP
ADJUST
V
FB
V
CC
0.1 mF
5 kW
1 W
1 kW
I
OUTPUT
GROUND
SENSE
I
OUTPUT
GROUND
SENSE
4.7 kW
ADJUST
R
T
/ C
T
C
T
SHUTDOWN TECHNIQUES
Shutdown of the UC1842 can be accomplished by two methods; either raise pin 3 above 1 V or pull pin 1 below
a voltage two diode drops above ground. Either method causses the output of the PWM comparator to be high
(refer to block diagram). The PWM latch is reset dominant so that the output will remain low until the next clock
cycle after the shutdown condition at pin 1 and/or 3 is removed. In one example, an externally latched shutdown
may be accomplished by adding an SCR which will be reset by cycling VCC below the lower UVLO threshold. At
this pint the reference turns off, allowing the SCR to reset.
1 kW
COMP
V
1
8
3
REF
SHUTDOWN
330 W
I
SENSE
500 W
SHUTDOWN
To Current
SENSE RESISTOR
7
Submit Documentation Feedback
UC1842/3/4/5
UC2842/3/4/5
UC3842/3/4/5
www.ti.com
SLUS223C–APRIL 1997–REVISED JUNE 2007
OFFLINE FLYBACK REGULATOR
T1
D6
U9D946
L1
R1
5 Ω 1 W
+6 V
VARO
VM 68
C9
3300 pF
600 V
R12
4.7 kΩ
2 W
117 VAC
C11
4700 µF
10 V
C10
N5
C1
250 µF
250 V
4700 µF
10 V
N
P
R2
56 kΩ
2 W
COM
D4
1N3613
D7
UF81002
+12 V
C12
D2
D3
2200 µF
R4
4.7 kΩ
R3
20 kΩ
N12
N12
1N3612
1N3612
16 V
±12 V COM
C13
2200 µF
16 V
R9
68 Ω
3 W
C4
C2
100 µF
25 V
C3
22 µF
47 µF
25 V
7
2
1
−12 V
NC
R5 150 kΩ
D8
UES1002
C14
UC3844
R7
22 Ω
Q1
100 pF
C8
UFN833
8
4
680 pF
600 V
6
R8
R6
10 kΩ
3
1 kΩ
C5
5
USD1120
R10
0.55 Ω
1 W
0.01 µF
R11
R13
20 kΩ
D8
1N3613
C7
470 pF
C6
0.0022 µF
2.7 kΩ
2 W
Power Supply Specifications
1. Input Voltages
a. 5VAC to 130VA (50 Hz/60 Hz)
2. Line Isolation: 3750 V
3. Switchng Frequency: 40 kHz
4. Efficiency at Full Load 70%
5. Output Voltage:
a. +5 V, ±5%; 1A to 4A load
Ripple voltage: 50 mV P-P Max
b. +12 V, ±3%; 0.1A to 0.3A load
Ripple voltage: 100 mV P-P Max
c. –12 V, ±3%; 0.1A to 0.3A load
Ripple voltage: 100 mV P-P Max
SLOPE COMPENSATION
A fraction of the oscillator ramp can be resistively summed with the current sense signal to provide slope
compensation for converters requiring duty cycles over 50%.
8
4
3
V
REF
0.1 mF
R
T
R
/ C
T
T
C
T
UC1842/3
I
R1
C
SENSE
R2
I
SENSE
R
SENSE
8
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
CDIP
LCCC
CDIP
LCCC
CDIP
LCCC
CFP
Drawing
JG
FK
JG
FK
JG
FK
W
5962-8670401PA
5962-8670401XA
5962-8670402PA
5962-8670402XA
5962-8670403PA
5962-8670403XA
5962-8670404DA
5962-8670404PA
5962-8670404XA
UC1842J
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
8
20
8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
A42 SNPB
POST-PLATE N / A for Pkg Type
A42 SNPB N / A for Pkg Type
POST-PLATE N / A for Pkg Type
A42 SNPB N / A for Pkg Type
POST-PLATE N / A for Pkg Type
N / A for Pkg Type
20
8
20
14
8
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
CDIP
LCCC
CDIP
CDIP
LCCC
CFP
JG
FK
JG
JG
FK
W
20
8
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
UC1842J883B
UC1842L883B
UC1842W
8
20
14
8
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
UC1843J
CDIP
CDIP
LCCC
LCCC
CFP
JG
JG
FK
FK
W
UC1843J883B
UC1843L
8
20
20
14
8
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
UC1843L883B
UC1843W
A42 SNPB
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
UC1844J
CDIP
CDIP
LCCC
LCCC
CFP
JG
JG
FK
FK
W
UC1844J883B
UC1844L
8
20
20
14
8
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
UC1844L883B
UC1844W
A42 SNPB
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
UC1845J
CDIP
CDIP
LCCC
LCCC
CFP
JG
JG
FK
FK
W
UC1845J883B
UC1845L
8
20
20
14
14
14
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
UC1845L883B
UC1845W
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
UC1845W883B
UC2842D
CFP
W
SOIC
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2842D8
UC2842D8G4
UC2842D8TR
UC2842D8TRG4
UC2842DG4
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2842DR
ACTIVE
ACTIVE
SOIC
SOIC
D
D
14
14
TBD
Call TI
Call TI
UC2842DTR
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2008
Orderable Device
UC2842DTRG4
UC2842DW
Status (1)
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
14
16
16
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
SOIC
DW
DW
40 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
UC2842DWG4
40 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
UC2842J
UC2842N
OBSOLETE
ACTIVE
CDIP
PDIP
JG
P
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC2842NG4
ACTIVE
PDIP
P
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC2842P
UC2843D
OBSOLETE
ACTIVE
PDIP
SOIC
P
D
8
TBD
Call TI
Call TI
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2843D8
UC2843D8G4
UC2843D8TR
UC2843D8TRG4
UC2843DG4
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2843DR
OBSOLETE
ACTIVE
SOIC
SOIC
D
D
14
14
TBD
Call TI
Call TI
UC2843DTR
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2843DTRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2843J
UC2843N
OBSOLETE
ACTIVE
CDIP
PDIP
JG
P
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC2843NG4
UC2844D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
P
D
D
D
D
D
D
D
D
P
8
14
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2844D8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2844D8G4
UC2844D8TR
UC2844D8TRG4
UC2844DG4
UC2844DTR
UC2844DTRG4
UC2844N
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
14
8
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2008
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
no Sb/Br)
UC2844NG4
UC2845D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
P
D
D
D
D
D
D
D
D
8
14
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2845D8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2845D8G4
UC2845D8TR
UC2845D8TRG4
UC2845DG4
UC2845DTR
UC2845DTRG4
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC2845J
UC2845N
OBSOLETE
ACTIVE
CDIP
PDIP
JG
P
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC2845NG4
UC3842D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
P
D
D
D
D
D
D
D
D
P
P
8
14
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3842D8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3842D8G4
UC3842D8TR
UC3842D8TRG4
UC3842DG4
UC3842DTR
UC3842DTRG4
UC3842N
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
14
8
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3842NG4
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3842P
UC3843D
OBSOLETE
ACTIVE
PDIP
SOIC
P
D
8
TBD
Call TI
Call TI
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3843D8
ACTIVE
ACTIVE
SOIC
SOIC
D
D
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3843D8G4
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2008
Orderable Device
UC3843D8TR
UC3843D8TRG4
UC3843DG4
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
D
D
D
D
P
P
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
14
8
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3843DTR
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3843DTRG4
UC3843N
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3843NG4
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3843P
UC3843QTR
UC3844D
OBSOLETE
OBSOLETE
ACTIVE
PDIP
PLCC
SOIC
P
FN
D
8
TBD
TBD
Call TI
Call TI
Call TI
Call TI
20
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3844D8
UC3844D8G4
UC3844D8TR
UC3844D8TRG4
UC3844DG4
UC3844DTR
UC3844DTRG4
UC3844N
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
D
D
D
D
D
D
D
P
P
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
14
8
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3844NG4
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3844P
UC3845AJ
UC3845D
OBSOLETE
ACTIVE
PDIP
CDIP
SOIC
P
JG
D
8
8
TBD
TBD
Call TI
Call TI
1
A42 SNPB
N / A for Pkg Type
ACTIVE
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3845D8
UC3845D8G4
UC3845D8TR
UC3845D8TRG4
UC3845DG4
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
D
8
8
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
UC3845DTR
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
19-Sep-2008
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
no Sb/Br)
UC3845DTRG4
UC3845N
ACTIVE
ACTIVE
SOIC
PDIP
PDIP
PDIP
D
P
P
P
14
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
UC3845NG4
UC3845P
ACTIVE
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
OBSOLETE
8
TBD
Call TI
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF UC1842, UC1843, UC1844, UC1845, UC3842, UC3843, UC3844, UC3845, UC3845AM :
Catalog: UC3842M, UC3845A
Space: UC1842-SP, UC1843-SP, UC1844-SP, UC1845-SP
•
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
•
•
Addendum-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
UC2842D8TR
UC2842DTR
UC2843D8TR
UC2843DTR
UC2844D8TR
UC2844DTR
UC2845D8TR
UC2845DTR
UC3842D8TR
UC3842DTR
UC3843D8TR
UC3843DTR
UC3844D8TR
UC3844DTR
UC3845D8TR
UC3845DTR
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
8
14
8
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
12.4
16.4
12.4
16.4
12.4
16.4
12.4
16.4
12.4
16.4
12.4
16.4
12.4
16.4
12.4
16.4
6.4
6.5
6.4
6.5
6.4
6.5
6.4
6.5
6.4
6.5
6.4
6.5
6.4
6.5
6.4
6.5
5.2
9.0
5.2
9.0
5.2
9.0
5.2
9.0
5.2
9.0
5.2
9.0
5.2
9.0
5.2
9.0
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
12.0
16.0
12.0
16.0
12.0
16.0
12.0
16.0
12.0
16.0
12.0
16.0
12.0
16.0
12.0
16.0
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
14
8
14
8
14
8
14
8
14
8
14
8
14
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Mar-2008
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
UC2842D8TR
UC2842DTR
UC2843D8TR
UC2843DTR
UC2844D8TR
UC2844DTR
UC2845D8TR
UC2845DTR
UC3842D8TR
UC3842DTR
UC3843D8TR
UC3843DTR
UC3844D8TR
UC3844DTR
UC3845D8TR
UC3845DTR
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
8
14
8
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
340.5
333.2
340.5
333.2
340.5
333.2
340.5
333.2
340.5
333.2
340.5
333.2
340.5
333.2
340.5
333.2
338.1
345.9
338.1
345.9
338.1
345.9
338.1
345.9
338.1
345.9
338.1
345.9
338.1
345.9
338.1
345.9
20.6
28.6
20.6
28.6
20.6
28.6
20.6
28.6
20.6
28.6
20.6
28.6
20.6
28.6
20.6
28.6
14
8
14
8
14
8
14
8
14
8
14
8
14
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPLC004A – OCTOBER 1994
FN (S-PQCC-J**)
PLASTIC J-LEADED CHIP CARRIER
20 PIN SHOWN
Seating Plane
0.004 (0,10)
0.180 (4,57) MAX
0.120 (3,05)
D
0.090 (2,29)
D1
0.020 (0,51) MIN
3
1
19
0.032 (0,81)
0.026 (0,66)
4
18
D2/E2
D2/E2
E
E1
8
14
0.021 (0,53)
0.013 (0,33)
0.050 (1,27)
9
13
0.007 (0,18)
M
0.008 (0,20) NOM
D/E
D1/E1
D2/E2
NO. OF
PINS
**
MIN
0.385 (9,78)
MAX
MIN
MAX
MIN
MAX
0.395 (10,03)
0.350 (8,89)
0.356 (9,04)
0.141 (3,58)
0.191 (4,85)
0.291 (7,39)
0.341 (8,66)
0.169 (4,29)
0.219 (5,56)
0.319 (8,10)
0.369 (9,37)
20
28
44
52
68
84
0.485 (12,32) 0.495 (12,57) 0.450 (11,43) 0.456 (11,58)
0.685 (17,40) 0.695 (17,65) 0.650 (16,51) 0.656 (16,66)
0.785 (19,94) 0.795 (20,19) 0.750 (19,05) 0.756 (19,20)
0.985 (25,02) 0.995 (25,27) 0.950 (24,13) 0.958 (24,33) 0.441 (11,20) 0.469 (11,91)
1.185 (30,10) 1.195 (30,35) 1.150 (29,21) 1.158 (29,41) 0.541 (13,74) 0.569 (14,45)
4040005/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-018
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.063 (1,60)
0.015 (0,38)
0.020 (0,51) MIN
0.200 (5,08) MAX
0.130 (3,30) MIN
Seating Plane
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.430 (10,92)
MAX
0.010 (0,25)
M
0.015 (0,38)
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
UC2843D8 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
UC2843D8G4 | TI | CURRENT MODE PWM CONTROLLER | 获取价格 | |
UC2843D8G4 | ROCHESTER | 1A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8 | 获取价格 | |
UC2843D8TR | TI | Current Mode PWM Controller | 获取价格 | |
UC2843D8TRG4 | TI | CURRENT MODE PWM CONTROLLER | 获取价格 | |
UC2843DD1R2G | ONSEMI | High Performance Current Mode Controllers | 获取价格 | |
UC2843DDR2G | ONSEMI | High Performance Current Mode Controllers | 获取价格 | |
UC2843DG4 | TI | CURRENT MODE PWM CONTROLLER | 获取价格 | |
UC2843DR | TI | Current Mode PWM Controller | 获取价格 | |
UC2843DTR | TI | Current Mode PWM Controller | 获取价格 | |
UC2843DTRG4 | TI | CURRENT MODE PWM CONTROLLER | 获取价格 |
UC2843D8 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6