BA6896FP-E2

更新时间:2024-09-18 14:20:56
品牌:ROHM
描述:CD Motor Driver, PDSO28, HSOP-28

BA6896FP-E2 概述

CD Motor Driver, PDSO28, HSOP-28 驱动电子器件

BA6896FP-E2 规格参数

生命周期:Obsolete零件包装代码:SOIC
包装说明:HSOP-28针数:28
Reach Compliance Code:unknownHTS代码:8542.39.00.01
风险等级:5.79接口集成电路类型:CD MOTOR DRIVER
JESD-30 代码:R-PDSO-G28长度:18.5 mm
端子数量:28封装主体材料:PLASTIC/EPOXY
封装代码:SSOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, SHRINK PITCH认证状态:Not Qualified
座面最大高度:2.41 mm表面贴装:YES
端子形式:GULL WING端子节距:0.8 mm
端子位置:DUAL宽度:7.5 mm
Base Number Matches:1

BA6896FP-E2 数据手册

通过下载BA6896FP-E2数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Optical disc ICs  
4-channel BTL driver for CD players  
BA6896FP  
The BA6896FP is a 4-channel BTL driver designed for CD player motor and actuator drives. The internal 5V regulator  
and standard operational amplifier make this IC suitable for a wide spectrum of applications.  
FApplications  
CD players, CD-ROM drives  
FFeatures  
1) HSOP 28-pin package, for application miniaturiza-  
5) Internal standard operational amplifier.  
6) Internal thermal shutdown function.  
7) The output current between pins 1 and 2 is mutable  
with the external mute pin.  
tion.  
2) A minimum of attached components.  
3) Driver gain is adjustable with a single attached resis-  
tor.  
4) Internal 5V regulator. (requires attached PNP tran-  
sistor)  
FAbsolute maximum ratings (Ta = 25_C)  
382  
Optical disc ICs  
BA6896FP  
FBlock diagram  
FPin descriptions  
383  
Optical disc ICs  
BA6896FP  
FPin equivalent circuit diagrams  
384  
Optical disc ICs  
BA6896FP  
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8)  
385  
Optical disc ICs  
BA6896FP  
FMeasurement circuit  
386  
Optical disc ICs  
BA6896FP  
FCircuit operation  
(1) Driver  
passed through a resistor and into the internal reference  
voltage component, the preamplifier output being a sig-  
nal centering on the internal reference voltage. Two sys-  
tems (positive phase and negative phase) are created  
during V / I conversion, generating BTL output via the  
driver buffer.  
Inputs to the IC are the focus tracking error signal from  
the servo preamplifier and the control signal from the mo-  
tor. The input signals, which normally center on 2.5V, are  
V / I converted by the preamplifier, generating a current  
corresponding to the input voltage. This current is  
(2) Regulator  
This is a typical series regulator that generates a refer-  
ence voltage internally. A PNP low saturation transistor  
must be connected.  
(3) Operational amplifier  
A standard 4558 type.  
387  
Optical disc ICs  
BA6896FP  
FApplication example  
388  
Optical disc ICs  
BA6896FP  
FOperation notes  
(1) The BA6896FP has an internal thermal shutdown  
circuit. Output current is muted when the chip tempera-  
ture exceeds 175_C (typically).  
(5) Muting occurs during thermal shutdown, mute-on  
operations or a drop in the bias pin voltage or supply volt-  
age. In each case, only the drivers are muted. During  
muting, the output pins remain at the internal bias volt-  
age, roughly (VCC*VF) / 2.  
(2) The output current can be muted be raising the  
mutepin(pin7)voltageabove2.2V. Pin7shouldbeopen  
or pulled up above 0.4V during normal operation.  
(3) Muting also occurs when the bias pin (23 pin) drops  
below 1.4V (typically). Pin 23 should stay above 1.6V  
during normal operation.  
(6) Attach a bypass capacitor (roughly 0.1µF) to the  
power supply, at the base of the IC.  
(7) The radiating fin is connected to the package’s in-  
ternal GND, but should also be connected to an external  
ground.  
(4) The internal circuits turn off when the supply volt-  
age drops below 4.5V (typically) and start up again when  
the supply voltage rises above 4.7V (typically).  
(8) The capacitor between regulator output (pin 6) and  
GNDalsoservestopreventoscillationoftheIC, soselect  
one with good temperature characteristics.  
FThermal derating curve  
FElectrical characteristic curves  
389  
Optical disc ICs  
BA6896FP  
FExternal dimensions (Units: mm)  
390  

BA6896FP-E2 相关器件

型号 制造商 描述 价格 文档
BA6896FPE1 ROHM CD MOTOR DRIVER, PDSO28, HSOP-28 获取价格
BA6896FPE2 ROHM CD MOTOR DRIVER, PDSO28, HSOP-28 获取价格
BA6896FPT1 ROHM CD Motor Driver, PDSO28, HSOP-28 获取价格
BA6896FPT2 ROHM CD Motor Driver, PDSO28, HSOP-28 获取价格
BA6896S ETC Servo/Spindle Motor Controller/Driver 获取价格
BA6897 ROHM 4-channel BTL driver for CD players 获取价格
BA6897FP ROHM 4-channel BTL driver for CD players 获取价格
BA6897FP-E2 ROHM Consumer Circuit, PDSO28, POWER, HSOP-28 获取价格
BA6897FP-T1 ROHM Consumer Circuit, PDSO28, POWER, HSOP-28 获取价格
BA6897FP-T2 ROHM Consumer Circuit, PDSO28, POWER, HSOP-28 获取价格

BA6896FP-E2 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6