BD6232HFP-LB [ROHM]
DC Brush Motor Drivers (36V max.);型号: | BD6232HFP-LB |
厂家: | ROHM |
描述: | DC Brush Motor Drivers (36V max.) |
文件: | 总19页 (文件大小:702K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Datasheet
DC Brush Motor Drivers (36V max.)
BD6232HFP-LB
General Description
Key Specifications
This is the product guarantees long time support in
Industrial market.
■
■
■
■
■
■
Supply Voltage Range:
36V(Max.)
Maximum Output Current:
Output ON resistance:
PWM Input frequency range:
Standby current:
1.0A
1.0Ω
20 to 100kHz
0μA (Typ.)
-25 to 85℃
BD6232HFP-LB is full bridge drivers for brush motor
applications. This IC can operate at a wide range of
power supply voltages (from 6V to 32V), with output
currents of up to 1A. MOS transistors in the output stage
allow PWM speed control. The integrated VREF voltage
control function allows direct replacement of deprecated
motor driver ICs. This highly efficient H-bridge driver IC
facilitate low-power consumption design.
Operating temperature range:
Package
(Typ.)
(Typ.)
(Max.)
HRP7
9.395mm x 10.540mm x 2.005mm
Features
Long Time Support Product for Industrial
Applications.
VREF voltage setting pin enables PWM duty control
Cross-conduction prevention circuit
Four protection circuits provided: OCP, OVP, TSD
and UVLO
HRP7 (Pd=1.60W)
Applications
Industrial
Equipment;
VTR;
CD/DVD
players;
*Pd : Mounted on a 70mm x 70mm x 1.6mm glass-epoxy
audio-visual equipment; optical disc drives; PC
peripherals; OA equipments
Ordering Information
B D 6 2 3 2 H F P - L B T R
Part Number
Package
HFP: HRP7
Product class
LB for Industrial applications
Packaging and forming specification
TR: Embossed taping
○Product structure:Silicon monolithic integrated circuit ○This product has no designed for protection against radioactive rays
.www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
1/16
TSZ22111・14・001
Daattaasshheeeett
BD6232HFP-LB
Block Diagrams / Pin Configurations / Pin Descriptions
Table 1 Pin Descriptions
Pin
1
Name
VREF
OUT1
FIN
Function
VREF
DUTY
PROTECT
1
Duty setting pin
Driver output
VCC
GND
7
4
2
FIN
RIN
3
5
3
Control input (forward)
Ground
CTRL
4
GND
RIN
5
Control input (reverse)
Driver output
FIN
2
6
GND
OUT1
OUT2
6
OUT2
VCC
GND
Figure 1. BLOCK Diagram
7
Power supply
Ground
FIN
Figure 2. Pin Configurations
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
2/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Absolute Maximum Ratings (Ta=25℃, All voltages are with respect to ground)
Parameter
Symbol
VCC
IOMAX
VIN
Ratings
Unit
V
Supply voltage
36
Output current
1.0 *1
A
All other input pins
Operating temperature
Storage temperature
Power dissipation
Junction temperature
-0.3 to VCC
-25 to +85
-55 to +150
1.6 *2
V
TOPR
TSTG
Pd
℃
℃
W
℃
Tjmax
150
*1
*2
Do not exceed Pd or ASO.
Mounted on a 70mm x 70mm x 1.6mm glass-epoxy board. Derate by 12.8mW/℃ above 25℃.
Recommended Operating Ratings (Ta=25℃)
Parameter
Supply voltage
VREF voltage
Symbol
Ratings
6 to 32
3 to 32
Unit
V
VCC
VREF
V
Electrical Characteristics (Unless otherwise specified, Ta=25℃ and VCC=VREF=24V)
Limits
Parameter
Symbol
Unit
Conditions
Min.
0.8
Min.
Min.
2.5
Supply current (1ch)
Supply current (2ch)
Stand-by current
1.3
Forward / Reverse / Brake
Forward / Reverse / Brake
Stand-by
ICC
ICC
ISTBY
VIH
mA
mA
µA
V
1.3
-
2.0
0
3.5
10
Input high voltage
Input low voltage
2.0
-
-
-
-
0.8
100
1.5
10
VIL
V
Input bias current
Output ON resistance
VREF bias current
Carrier frequency
Input frequency range
30
0.5
-10
20
20
50
1.0
0
VIN=5.0V
IIH
µA
ꢀ
IO=1.0A, vertically total
VREF=VCC
VREF=18V
RON
IVREF
FPWM
FMAX
µA
kHz
kHz
25
-
35
100
FIN / RIN
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
3/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Typical Performance Curves (Reference data)
2.5
2.0
1.5
1.5
1.0
0.5
0.0
-0.5
-40°C
25°C
85°C
-40°C
25°C
85°C
85°C
25°C
-40°C
1.0
0.5
6
12
18
24
30
36
0.8
1.2
1.6
2
SupplyVoltage: Vcc [V]
Input Voltage: VIN [V]
Figure 3. Supply current
Figure 4. Input threshold voltage
1.0
0.8
0.6
0.4
0.2
0.0
10
5
-40°C
25°C
85°C
85°C
25°C
-40°C
0
-5
-10
0
6
12
18
24
30
36
0
6
12
18
24
30
36
Input Voltage: VIN [V]
Input Voltage: VREF [V]
Figure 5. Input bias current
Figure 6. VREF input bias current
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
4/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Typical Performance Curves (Reference data) - Continued
1.0
0.8
0.6
0.4
0.2
0.0
40
30
20
10
85°C
25°C
-40°C
-40°C
25°C
85°C
0
0.2
0.4
0.6
0.8
1
6
12
18
24
30
36
Input Voltage: VREF / VCC [V]
Supply Voltage: VCC [V]
Figure 7. VREF - DUTY
(VCC=24V)
Figure 8. VCC - Carrier frequency
48
36
24
12
0
9
6
3
0
85°C
25°C
-40°C
-40°C
25°C
85°C
36
40
44
48
4.5
5
5.5
6
Supply Voltage: VCC [V]
Supply Voltage: VCC [V]
Figure 9. Under voltage lock out
Figure 10. Over voltage protection
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
5/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Typical Performance Curves (Reference data) - Continued
1.5
1.0
0.5
0.0
-0.5
1.5
1.0
0.5
0.0
-0.5
85°C
25°C
-40°C
125
150
175
200
5.5
5.75
6
6.25
6.5
6.75
7
Junction Temperature: Tj [°C]
Figure 11. Thermal shutdown
Load Current / Iomax
Figure 12. Over current protection (H side)
2
1.5
1
1.5
1.0
0.5
0.0
-0.5
85°C
25°C
-40°C
85°C
25°C
-40°C
0.5
0
2
2.25
2.5
2.75
3
3.25
3.5
0
0.4
0.8
1.2
1.6
2
Load Current / Iomax
Output Current: IOUT [A]
Figure 13. Over current protection (L side)
Figure 14. Output high voltage
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
6/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Typical Performance Curves (Reference data) – Continued
2
2
1.5
1
85°C
25°C
-40°C
-40°C
25°C
85°C
1.5
1
0.5
0
0.5
0
0
0.4
0.8
1.2
1.6
2
0
0.4
0.8
1.2
1.6
2
Output Current: IOUT [A]
Output Current: IOUT [A]
Figure 15. High side body diode
Figure 16. Output low voltage
2
1.5
1
-40°C
25°C
85°C
0.5
0
0
0.4
Output Current: IOUT [A]
Figure 17. Low side body diode
0.8
1.2
1.6
2
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
7/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Functional Descriptions
1) Operation modes
Table 2 Logic table
FIN
RIN
VREF
X
OUT1
OUT2
Hi-Z*
L
Operation
a
b
c
d
e
f
L
L
Hi-Z*
Stand-by (idling)
H
L
H
VCC
VCC
X
H
L
Forward (OUT1 > OUT2)
Reverse (OUT1 < OUT2)
Brake (stop)
L
H
H
H
L
L
__________
PWM
L
L
VCC
VCC
VCC
VCC
Option
Option
H
Forward (PWM control mode A)
Reverse (PWM control mode A)
Forward (PWM control mode B)
Reverse (PWM control mode B)
Forward (VREF control)
PWM
__________
PWM
__________
PWM
PWM
PWM
H
H
L
__________
PWM
__________
PWM
g
h
i
H
PWM
H
L
L
H
__________
j
L
H
H
Reverse (VREF control)
PWM
* Hi-Z : all output transistors are off. Please note that this is the state of the connected diodes, which differs from that of the mechanical relay.
X : Don’t care
a) Stand-by mode
Stand-by operates independently with the VREF pin voltage. In stand-by mode, all internal circuits are turned off,
including the output power transistors. Motor output goes to high impedance. When the system is switched to
stand-by mode while the motor is running, the system enters an idling state because of the body diodes. However,
when the system switches to stand-by from any other mode (except the brake mode), the control logic remains in the
high state for at least 50µs before shutting down all circuits.
b) Forward mode
This operating mode is defined as the forward rotation of the motor when the OUT1 pin is high and OUT2 pin is low.
When the motor is connected between the OUT1 and OUT2 pins, the current flows from OUT1 to OUT2. To operate
in this mode, connect the VREF pin to the VCC pin.
c) Reverse mode
This operating mode is defined as the reverse rotation of the motor when the OUT1 pin is low and OUT2 pin is high.
When the motor is connected between the OUT1 and OUT2 pins, the current flows from OUT2 to OUT1. To operate
in this mode, connect the VREF pin to the VCC pin.
d) Brake mode
This operating mode is used to quickly stop the motor (short circuit brake). It differs from the stand-by mode because
the internal control circuit is operating in the brake mode. Please switch to stand-by mode (rather than the brake
mode) to save power and reduce consumption.
OFF
OFF
OFF ON
OFF OFF
OFF OFF
ON OFF
OFF ON
OFF
ON
M
M
M
M
ON
ON
a) Stand-by mode
b) Forward mode
c) Reverse mode
d) Brake mode
Figure 18. Four basic operations (output stage)
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
8/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
e) f) PWM control mode A
The rotational speed of the motor can be controlled by the duty cycle of the PWM signal fed to the FIN pin or the
RIN pin. In this mode, the high side output is fixed and the low side output is switching, corresponding to the input
signal. The state of the output toggles between "L" and "Hi-Z".
The frequency of the input PWM signal can be between 20kHz and 100kHz. The circuit may not operate properly for
PWM frequencies below 20kHz and above 100kHz. Note that control may not be attained by switching on duty at
frequencies lower than 20kHz, since the operation functions via the stand-by mode. To operate in this mode,
connect the VREF pin to the VCC pin. In addition, establish a current path for the recovery current from the motor,
by connecting a bypass capacitor (10µF or higher is recommended) between VCC and ground.
ON
OFF
ON
ON
OFF
OFF
M
M
OFF
OFF
Control input : H
Control input : L
Figure 19. PWM control mode A operation (output stage)
FIN
RIN
OUT1
OUT2
Figure 20. PWM control mode A operation (timing chart)
g) h) PWM control mode B
The rotational speed of the motor can be controlled by the duty cycle of the PWM signal fed to the FIN pin or the
RIN pin. In this mode, the low side output is fixed and the high side output is switching, corresponding to the input
signal. The state of the output toggles between "L" and "H".
The frequency of the input PWM signal can be between 20kHz and 100kHz. The circuit may not operate properly for
PWM frequencies below 20kHz and above 100kHz. To operate in this mode, connect the VREF pin to the VCC pin.
In addition, establish a current path for the recovery current from the motor, by connecting a bypass capacitor (10µF
or higher is recommended) between VCC and ground.
ON
OFF
ON
ON
OFF
OFF
M
M
OFF
OFF
Control input : H
Control input : L
Figure 21. PWM control mode B operation (output stage)
FIN
RIN
OUT1
OUT2
Figure 22. PWM control mode B operation (timing chart)
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
9/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
i) j) VREF control mode
The built-in VREF duty cycle conversion circuit provides a duty cycle corresponding to the voltage of the VREF pin
and the VCC voltage. The function offers the same level of control as the high voltage output setting function in
previous models. The duty cycle is calculated by the following equation.
DUTY ≈ VREF [V] / VCC [V]
For example, if VCC voltage is 24V and VREF pin voltage is 18V, the duty cycle is about 75 percent. However,
please note that the duty cycle might be limited by the range of the VREF pin voltage (Refer to the operating
conditions, shown on page 2). The PWM carrier frequency in this mode is 25kHz (nominal), and the switching
operation is the same as the PWM control modes. When operating in this mode, do not input a PWM signal to the
FIN and RIN pins. In addition, establish a current path for the recovery current from the motor, by connecting a
bypass capacitor (10µF or more is recommended) between VCC and ground.
VCC
VREF
0
FIN
RIN
OUT1
OUT2
Figure 23. VREF control operation (timing chart)
2) Cross-conduction protection circuit
In the full bridge output stage, when the upper and lower transistors are turned on at the same time during high to low
or low to high transition, an inrush current flows from the power supply to ground, resulting to a loss. This circuit
eliminates the inrush current by providing a dead time (about 400ns, nominal) during the transition.
3) Output protection circuits
a) Under voltage lock out (UVLO) circuit
To ensure the lowest power supply voltage necessary to operate the controller, and to prevent under voltage
malfunctions, a UVLO circuit has been built into this driver. When the power supply voltage falls to 5.0V (nominal) or
below, the controller forces all driver outputs to high impedance. When the voltage rises to 5.5V (nominal) or above,
the UVLO circuit ends the lockout operation and returns the chip to normal operation.
b) Over voltage protection (OVP) circuit
When the power supply voltage exceeds 45V (nominal), the controller forces all driver outputs to high impedance.
The OVP circuit is released and its operation ends when the voltage drops back to 40V (nominal) or below. This
protection circuit does not work in the stand-by mode. Also, note that this circuit is supplementary, and thus if it is
asserted, the absolute maximum rating will have been exceeded. Therefore, do not continue to use the IC after this
circuit is activated, and do not operate the IC in an environment where activation of the circuit is assumed.
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
10/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
c) Thermal shutdown (TSD) circuit
The TSD circuit operates when the junction temperature of the driver exceeds the preset temperature (175℃
nominal). At this time, the controller forces all driver outputs to high impedance. Since thermal hysteresis is provided
in the TSD circuit, the chip returns to normal operation when the junction temperature falls below the preset
temperature (150℃ nominal). Thus, it is a self-resetting circuit.
The TSD circuit is designed only to shut the IC off to prevent thermal runaway. It is not designed to protect the IC or
guarantee its operation in the presence of extreme heat. Do not continue to use the IC after the TSD circuit is
activated, and do not operate the IC in an environment where activation of the circuit is assumed.
d) Over current protection (OCP) circuit
To protect this driver IC from ground faults, power supply line faults and load short circuits, the OCP circuit monitors
the output current for the circuit’s monitoring time (10µs, nominal). When the protection circuit detects an over
current, the controller forces all driver outputs to high impedance during the off time (290µs, nominal). The IC returns
to normal operation after the off time period has elapsed (self-returning type). At the two channels type, this circuit
works independently for each channel.
Threshold
Iout
0
CTRL Input
Internal status
Monitor / Timer
ON
mon.
OFF
ON
off timer
Figure 24. Over current protection (timing chart)
I/O equivalent circuit
VCC
VCC
VCC
100k
100k
10k
FIN
RIN
OUT1
OUT2
VREF
GND
Figure 25. FIN / RIN
Figure 26. VREF
Figure 27. OUT1 / OUT2
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
11/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Operational Notes
1) Absolute maximum ratings
Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit
between pins or an open circuit between pins. Therefore, it is important to consider circuit protection measures, such
as adding a fuse, in case the IC is operated over the absolute maximum ratings.
2) Reverse connection of power supply
Connecting the power supply in reverse polarity can damage the IC. Take precautions against reverse
polarity when connecting the power supply, such as mounting an external diode between the power
supply and the IC’s power supply terminals.
3) Power supply lines
Design the PCB layout pattern to provide low impedance ground and supply lines. Separate the ground and supply
lines of the digital and analog blocks to prevent noise in the ground and supply lines of the digital block from affecting
the analog block. Furthermore, connect a capacitor to ground at all power supply pins. Consider the effect of
temperature and aging on the capacitance value when using electrolytic capacitors.
4) Ground Voltage
The voltage of the ground pin must be the lowest voltage of all pins of the IC at all operating conditions. Ensure that no
pins are at a voltage below the ground pin at any time, even during transient condition.
5) Thermal consideration
Use a thermal design that allows for a sufficient margin by taking into account the permissible power dissipation (Pd) in
actual operating conditions. Consider Pc that does not exceed Pd in actual operating conditions (Pc≥Pd).
Package Power dissipation
Power dissipation
: Pd (W)=(Tjmax-Ta)/θja
: Pc (W)=(Vcc-Vo)×Io+Vcc×Ib
Tjmax : Maximum junction temperature=150℃, Ta : Peripheral temperature[℃] ,
θja : Thermal resistance of package-ambience[℃/W], Pd : Package Power dissipation [W],
Pc : Power dissipation [W], Vcc : Input Voltage, Vo : Output Voltage, Io : Load, Ib : Bias Current
6) Short between pins and mounting errors
Be careful when mounting the IC on printed circuit boards. The IC may be damaged if it is mounted in a
wrong orientation or if pins are shorted together. Short circuit may be caused by conductive particles
caught between the pins.
7) Operation under strong electromagnetic field
Operating the IC in the presence of a strong electromagnetic field may cause the IC to malfunction.
8) Area of Safe Operation (ASO)
Operate the IC such that the output voltage, output current, and power dissipation are all within the Area of Safe
Operation (ASO).
9) Capacitor between output and GND
If a large capacitor is connected between the output pin and GND pin, current from the charged capacitor can flow into
the output pin and may destroy the IC when the VCC or VIN pin is shorted to ground or pulled down to 0V. Use a
capacitor smaller than 10uF between output and GND.
10) Testing on application boards
When testing the IC on an application board, connecting a capacitor directly to a low-impedance output pin may subject
the IC to stress. Always discharge capacitors completely after each process or step. The IC’s power supply should
always be turned off completely before connecting or removing it from the test setup during the inspection process. To
prevent damage from static discharge, ground the IC during assembly and use similar precautions during transport and
storage.
11) Switching noise
When the operation mode is in PWM control or VREF control, PWM switching noise may affect the control input pins
and cause IC malfunctions. In this case, insert a pull down resistor (10kꢀ is recommended) between each control input
pin and ground.
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
12/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
12) Regarding the input pin of the IC
This monolithic IC contains P+ isolation and P substrate layers between adjacent elements in order to keep them
isolated. P-N junctions are formed at the intersection of the P layers with the N layers of other elements, creating a
parasitic diode or transistor. For example (refer to figure below):
When GND > Pin A and GND > Pin B, the P-N junction operates as a parasitic diode.
When GND > Pin B, the P-N junction operates as a parasitic transistor.
Parasitic diodes inevitably occur in the structure of the IC. The operation of parasitic diodes can result in mutual
interference among circuits, operational faults, or physical damage. Therefore, conditions that cause these diodes to
operate, such as applying a voltage lower than the GND voltage to an input pin (and thus to the P substrate) should be
avoided.
Resistor
Transistor (NPN)
Pin A
Pin B
Pin B
B
C
E
Pin A
B
C
E
N
P+
P+
P+
N
N
N
P+
P
Parasitic
element
N
P
N
P substrate
P substrate
Parasitic
element
GND
GND
GND
GND
Parasitic element
Parasitic element
Other adjacent elements
Figure 28. Example of monolithic IC structure
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
13/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Marking Diagram
HRP7 (TOP VIEW)
Part Number Marking
LOT Number
1PIN MARK
Part Number
Package
Part Number Marking
BD6232HFP
BD6232HFP-LB HRP7
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
14/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Physical Dimensions Tape and Reel Information
Package Name
HRP7
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
15/16
TSZ22111・15・001
Daattaasshheeeett
BD6232HFP-LB
Revision History
Date
Revision
001
Changes
15.Feb.2013
New Release
Add sentence “This is the product guarantees long time support in Industrial market.” in
General Description.
Change “Industrial machinery” to “Long Time Support a Product for Industrial Applications.”
In Features.
26.Feb.2014
002
Change “Industrial machinery” to “Industrial Equipment” in Applications.
Applied new style (“title”, “Ordering Information” and “Physical Dimension Tape and Reel
Information”).
www.rohm.com
TSZ02201-0P2P0B300340-1-2
26.Feb.2014 Rev.002
© 2013 ROHM Co., Ltd. All rights reserved.
16/16
TSZ22111・15・001
Daattaasshheeeett
Notice
Precaution on using ROHM Products
(Note 1)
1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment
,
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the
ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice - SS
Rev.002
© 2014 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act,
please consult with ROHM representative in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable
for infringement of any intellectual property rights or other damages arising from use of such information or data.:
2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the information contained in this document.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice - SS
Rev.002
© 2014 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s
representative.
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2014 ROHM Co., Ltd. All rights reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明