DTA143XE3 (新产品) [ROHM]

These are the standard products of "digital transistors" which ROHM invented and marketed first in the world.;
DTA143XE3 (新产品)
型号: DTA143XE3 (新产品)
厂家: ROHM    ROHM
描述:

These are the standard products of "digital transistors" which ROHM invented and marketed first in the world.

小信号双极晶体管
文件: 总3页 (文件大小:153K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
-100mA / -50V Digital transistors  
(with built-in resistors)  
DTA143XEB  
zApplications  
zDimensions (Unit : mm)  
Inverter, Interface, Driver  
EMT3F  
1.6  
0.7  
0.26  
(3)  
zFeatures  
1) Built-in bias resistors enable the configuration of  
an inverter circuit without connecting external  
input resistors (see equivalent circuit).  
2) The bias resistors consist of thin-film resistors  
with complete isolation to allow negative biasing  
of the input. They also have the advantage of  
almost completely eliminating parasitic effects.  
3) Only the on/off conditions need to be set for  
operation, making the device design easy.  
(1)  
0.5 0.5  
1.0  
(2)  
0.13  
(1) IN  
(2) GND  
(3) OUT  
Each lead has same dimensions  
Abbreviated symbol : 33  
zStructure  
zInner circuit  
PNP silicon epitaxial planar transistor type  
(Resistor built-in)  
OUT  
R1  
IN  
R2  
zPackaging specifications  
GND(+)  
Package  
EMT3F  
Taping  
TL  
Packaging type  
Code  
OUT  
IN  
GND(+)  
Part No.  
Basic ordering unit (pieces)  
3000  
DTA143XEB  
R1  
=4.7k, R =10kΩ  
2
zAbsolute maximum ratings (Ta=25°C)  
Parameter  
Symbol  
Limits  
Unit  
Supply voltage  
Input voltage  
V
CC  
50  
V
V
V
IN  
20 to +7  
Collector current  
Output current  
Ic(max) 1  
100  
100  
mA  
mA  
mW  
°C  
Io  
2  
Power dissipation  
Junction temperature  
P
D
150  
Tj  
Tstg  
150  
Range of storage temperature  
55 to +150  
°C  
1 Characteristics of built-in transistor  
2 Each terminal mounted on a recommended land  
www.rohm.com  
2009.07 - Rev.B  
1/2  
c
2009 ROHM Co., Ltd. All rights reserved.  
DTA143XEB  
Data Sheet  
zElectrical characteristic curves  
1k  
10m  
5m  
100  
VO=−5V  
V =−0.3V  
O
VCC=−5V  
500  
50  
2m  
200  
100  
50  
20  
10  
5  
1m  
500µ  
Ta=−40°C  
25°C  
Ta=100°C  
25°C  
Ta=100°C  
25°C  
40°C  
200µ  
100°C  
100µ  
50µ  
40°C  
20  
2  
1  
10  
5
20µ  
10µ  
5µ  
500m  
2
1
200m  
100m  
2µ  
1µ  
100µ −200µ −500µ −1m  
2m  
5m 10m 20m  
50m 100m  
100µ −200µ −500µ −1m  
2m  
5m 10m 20m  
50m 100m  
0
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
OUTPUT CURRENT : I (V)  
O
OUTPUT CURRENT : I (V)  
O
INPUT VOLTAGE : VI(off) (V)  
Fig.3 DC current gain vs. output  
current  
Fig.1 Input voltage vs. output current  
(ON characteristics)  
Fig.2 Output current vs. input voltage  
(OFF characteristics)  
1  
IO/II=20  
500m  
200m  
100m  
50m  
Ta=100°C  
25°C  
40°C  
20m  
10m  
5m  
2m  
1m  
100µ −200µ −500µ −1m  
2m  
5m 10m 20m  
50m 100m  
OUTPUT CURRENT : I (V)  
O
Fig.4 Output voltage vs. output  
current  
www.rohm.com  
2009.07 - Rev.B  
2/2  
c
2009 ROHM Co., Ltd. All rights reserved.  
Notice  
N o t e s  
No copying or reproduction of this document, in part or in whole, is permitted without the  
consent of ROHM Co.,Ltd.  
The content specified herein is subject to change for improvement without notice.  
The content specified herein is for the purpose of introducing ROHM's products (hereinafter  
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,  
which can be obtained from ROHM upon request.  
Examples of application circuits, circuit constants and any other information contained herein  
illustrate the standard usage and operations of the Products. The peripheral conditions must  
be taken into account when designing circuits for mass production.  
Great care was taken in ensuring the accuracy of the information specified in this document.  
However, should you incur any damage arising from any inaccuracy or misprint of such  
information, ROHM shall bear no responsibility for such damage.  
The technical information specified herein is intended only to show the typical functions of and  
examples of application circuits for the Products. ROHM does not grant you, explicitly or  
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and  
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the  
use of such technical information.  
The Products specified in this document are intended to be used with general-use electronic  
equipment or devices (such as audio visual equipment, office-automation equipment, commu-  
nication devices, electronic appliances and amusement devices).  
The Products specified in this document are not designed to be radiation tolerant.  
While ROHM always makes efforts to enhance the quality and reliability of its Products, a  
Product may fail or malfunction for a variety of reasons.  
Please be sure to implement in your equipment using the Products safety measures to guard  
against the possibility of physical injury, fire or any other damage caused in the event of the  
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM  
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed  
scope or not in accordance with the instruction manual.  
The Products are not designed or manufactured to be used with any equipment, device or  
system which requires an extremely high level of reliability the failure or malfunction of which  
may result in a direct threat to human life or create a risk of human injury (such as a medical  
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,  
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of  
any of the Products for the above special purposes. If a Product is intended to be used for any  
such special purpose, please contact a ROHM sales representative before purchasing.  
If you intend to export or ship overseas any Product or technology specified herein that may  
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to  
obtain a license or permit under the Law.  
Thank you for your accessing to ROHM product informations.  
More detail product informations and catalogs are available, please contact us.  
ROHM Customer Support System  
http://www.rohm.com/contact/  
www.rohm.com  
© 2009 ROHM Co., Ltd. All rights reserved.  
R0039  
A

相关型号:

DTA143XE3HZG (新产品)

DTA143XE3HZG是一款车规级高可靠性数字晶体管。
ROHM

DTA143XEB

-100mA / -50V Digital transistors
ROHM

DTA143XEBHZGTL

Small Signal Bipolar Transistor,
ROHM

DTA143XEBTL

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon, ROHS COMPLIANT, EMT3F, 3 PIN
ROHM

DTA143XEFRA

车载数字晶体管
ROHM

DTA143XEFRATL

Small Signal Bipolar Transistor,
ROHM

DTA143XETL

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon, ROHS COMPLIANT, EMT3, 3 PIN
ROHM

DTA143XETR

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon,
ROHM

DTA143XE_09

-100mA /-50V Digital transistors
ROHM

DTA143XF

DTA/DTC SERIES
ROHM

DTA143XFA

TRANSISTOR | 50V V(BR)CEO | 100MA I(C) | SC-71
ETC

DTA143XFAC1

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon, FTR, 3 PIN
ROHM