DTB523YM [ROHM]
-500mA / -12V Low VCE (sat) Digital transistors (with built-in resistors); -500mA / -12V低VCE （ sat）的数字晶体管（带内置式电阻器）
| 型号： | DTB523YM |
| 厂家： | 
ROHM |
| 描述： | -500mA / -12V Low VCE (sat) Digital transistors (with built-in resistors) |
| 文件： | 总2页 (文件大小：59K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DTB523YE / DTB523YM
Transistors
-500mA / -12V Low VCE (sat) Digital transistors
(with built-in resistors)
DTB523YE / DTB523YM
zApplications
zExternal dimensions (Unit : mm)
Inverter, Interface, Driver
DTB523YE
0.7
1.6
0.3
0.55
zFeature
( )
3
1) VCE (sat) is lower than conventional products.
2) Built-in bias resistors enable the configuration of an
inverter circuit without connecting external input
resistors (see equivalent circuit).
(
)
( )
1
2
0.2
0.2
0.15
(1) GND
(2) IN
(3) OUT
0.5 0.5
1.0
EMT3
JEITA No. (SC-75A)
JEDEC No. <SOT-416>
Each lead has same dimensions
3) The bias resistors consist of thin-film resistors with
complete isolation to allow positive biasing of the
input. They also have the advantage of almost
completely eliminating parasitic effects.
Abbreviated symbol : X53
DTB523YM
1.2
0.32
4) Only the on / off conditions need to be set for
operation, making the device design easy.
(3)
( )( )
1 2
0.22
(1) IN
(2) GND
(3) OUT
0.13
0.4 0.4
0.5
zStructure
PNP epitaxial plannar silicon transistor
(Resistor built-in type)
0.8
VMT3
Each lead has same dimensions
Abbreviated symbol : X53
zAbsolute maximum ratings (Ta=25°C)
zPackaging specifications
Package
EMT3
Taping
TL
VMT3
Taping
T2L
Limits
Parameter
Supply voltage
Symbol
Unit
Packaging type
Code
DTB523YE DTB523YM
V
CC
IN
C (max)
V
V
−12
−12 to +5
−500
Basic ordering
unit (pieces)
Input voltage
V
3000
8000
Part No.
∗1
∗2
Collector current
Power dissipation
Junction temperature
Storage temperature
I
mA
mW
C
DTB523YE
DTB523YM
−
P
D
150
−
Tj
Tstg
150
C
−55 to +150
∗1 Characteristics of built-in transistor.
∗2 Each terminal mounted on a recommended land.
zElectrical characteristics (Ta=25°C)
zEquivalent circuit
Parameter
Symbol Min.
Typ. Max. Unit
Conditions
=−100µA
=−20mA
= −100mA / −5mA
= −5V
CC= −12V, V
V
V
I(off)
−
−2.5
−
−
−
−0.3
−
V
CC=−5V, I
O
OUT
R1
Input voltage
V
IN
I(on)
V
O
=−0.3V, I
O
R2
Output voltage
Input current
V
O(on)
−60
−
−300
−3.0
−0.5
−
mV
mA
µA
−
I
O
/I
I
I
I
−
V
V
V
V
I
GND(+)
OUT
Output current
DC current gain
Transition frequency
Input resistance
Resistance ratio
I
O(off)
−
−
I
=0V
G
I
140
−
−
O
= −2V, I
O
=−100mA
IN
∗
f
T
260
2.2
4.5
−
MHz
kΩ
−
CE=−10V
,
I
E
=5mA, f=100MHz
GND(+)
R1
1.54
3.6
2.86
5.5
−
−
R
2/R1
R1
=2.2kΩ / R =10kΩ
2
∗ Characteristics of built-in transistor.
1/1
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号：
DTB543EE3 (新产品)
These are the standard products of "digital transistors" which ROHM invented and marketed first in the world.
ROHM
DTB543EMT2L
Small Signal Bipolar Transistor, 0.5A I(C), 12V V(BR)CEO, 1-Element, PNP, Silicon, ROHS COMPLIANT, VMT3, 3 PIN
ROHM
DTB543XETL
Small Signal Bipolar Transistor, 0.5A I(C), 12V V(BR)CEO, 1-Element, PNP, Silicon, SC-75A, EMT3, 3 PIN
ROHM
DTB543ZE3 (新产品)
These are the standard products of "digital transistors" which ROHM invented and marketed first in the world.
ROHM
DTB543ZMT2L
Small Signal Bipolar Transistor, 0.5A I(C), 12V V(BR)CEO, 1-Element, PNP, Silicon, ROHS COMPLIANT, VMT3, 3 PIN
ROHM
©2020 ICPDF网 联系我们和版权申明