DTC115EUB [ROHM]

DTC115EUB是标准的数字晶体管(电阻内置型晶体管)产品。;
DTC115EUB
型号: DTC115EUB
厂家: ROHM    ROHM
描述:

DTC115EUB是标准的数字晶体管(电阻内置型晶体管)产品。

小信号双极晶体管 数字晶体管
文件: 总3页 (文件大小:181K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
100mA / 50V Digital transistors  
(with built-in resistors)  
DTC115EEB  
zApplications  
z Dimensions (Unit : mm)  
EMT3F  
Inverter, Interface, Driver  
zFeatures  
1) Built-in bias resistors enable the configuration of  
an inverter circuit without connecting external  
input resistors (see equivalent circuit).  
2) Each bias resistor is a thin-film resistor.  
Since they are completely insulated,  
(3)  
(1)  
(2)  
the input can be negatively biased. The insulation also  
eliminates most of the parasitic effects.  
3) Only the on / off conditions need to be set for operation,  
making the device design easy.  
Abbreviated symbol : 29  
(1) IN  
(2) GND  
(3) OUT  
Each lead has same dimensions  
zStructure  
NPN silicon epitaxial planar digital transistor  
zPackaging specifications  
zInner circuit  
Package  
Taping  
TR  
OUT  
(3)  
Type  
Code  
Basic ordering unit (pieces)  
3000  
DTC115EEB  
R2  
R1  
(1)  
(2)  
GND  
zAbsolute maximum ratings (Ta=25°C)  
IN  
Parameter  
Symbol  
Limits  
Unit  
V
IN  
OUT  
Supply voltage  
V
CC  
50  
GND  
V
Input voltage  
V
IN  
10 to 40  
100  
1  
2  
R1=100k, R2=100kΩ  
I
C(Max.)  
mA  
mA  
mW  
°C  
Collector current  
Output Current  
I
O
20  
Power dissipation  
Junction temperature  
P
D
150  
Tj  
Tstg  
150  
Range of storage temperature  
55 to +150  
°C  
1 Characteristics of built-in transistor  
2 Each terminal mounted on a recommended land  
www.rohm.com  
2009.07 - Rev.B  
1/2  
c
2009 ROHM Co., Ltd. All rights reserved.  
DTC115EEB  
Data Sheet  
zElectrical characteristics (Ta=25°C)  
Parameter  
Symbol Min.  
Typ.  
Max.  
500  
Unit  
mV  
Conditions  
=100µA  
=1mA  
=5mA/0.25mA  
=5V  
CC=50V, V  
=5V, I =5mA  
CE=10V, I  
V
I(off)  
I(on)  
V
CC=5V, I  
=0.3V, I  
/I  
O
Input voltage  
V
3.0  
VO  
O
V
VO(on)  
100  
300  
0.15  
500  
mV  
IO I  
Output voltage  
Input current  
I
I
mA  
nA  
V
V
V
V
I
I
O(off)  
I=0V  
Output current  
DC current gain  
Transition frequency  
Input resistance  
G
I
82  
O
O
f
T
E
= 5mA, f=100MHz  
250  
MHz  
kΩ  
R1  
70  
100  
1
130  
1.2  
R2/R1  
0.8  
Resistance ratio  
Characteristics of built-in transistor  
zElectrical characteristic curves  
10  
10  
1
VCC= 5V  
Ta= 40 C  
°
25 C  
ꢀꢀꢀꢀ  
ꢀꢀꢀꢀ  
°
85 C  
°
125 C  
ꢀꢀꢀ  
°
1
Ta=125 C  
°
0.1  
0.01  
85 C  
ꢀꢀꢀꢀ  
ꢀꢀꢀꢀ  
ꢀꢀꢀ-  
°
25 C  
°
40 C  
°
V0= 0.3V  
10 100  
0.1  
0
1
2
3
0.01  
0.1  
1
INPUT VOLTAGE : VI(off) (V)  
OUTPUT CURRENT : IO (mA)  
Fig.1 Input Voltage v s. Output Current  
(ON Characteristics)  
Fig.2 Output Current vs. Input Voltage  
(OFF Characteristics)  
1000  
100  
10  
1
IC/II=20  
VO= 5V  
Ta=125 C  
°
85 C  
ꢀꢀꢀꢀ  
ꢀꢀꢀꢀ  
ꢀꢀꢀ-  
°
Ta=125 C  
°
25 C  
°
85 C  
ꢀꢀꢀꢀ  
ꢀꢀꢀꢀ  
ꢀꢀꢀ-  
°
40 C  
°
25 C  
°
40 C  
°
0.1  
1
0.01  
0.1  
0.01  
0.1  
1
10  
100  
1
10  
100  
OUOPUT CURRENT : IO (mA)  
OUTPUT CURENT : IO (mA)  
Fig.3 DC Current Gain v s. Output Current  
Fig.4 Output Voltage v s. Output Current  
www.rohm.com  
2009.07 - Rev.B  
2/2  
c
2009 ROHM Co., Ltd. All rights reserved.  
Notice  
N o t e s  
No copying or reproduction of this document, in part or in whole, is permitted without the  
consent of ROHM Co.,Ltd.  
The content specified herein is subject to change for improvement without notice.  
The content specified herein is for the purpose of introducing ROHM's products (hereinafter  
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,  
which can be obtained from ROHM upon request.  
Examples of application circuits, circuit constants and any other information contained herein  
illustrate the standard usage and operations of the Products. The peripheral conditions must  
be taken into account when designing circuits for mass production.  
Great care was taken in ensuring the accuracy of the information specified in this document.  
However, should you incur any damage arising from any inaccuracy or misprint of such  
information, ROHM shall bear no responsibility for such damage.  
The technical information specified herein is intended only to show the typical functions of and  
examples of application circuits for the Products. ROHM does not grant you, explicitly or  
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and  
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the  
use of such technical information.  
The Products specified in this document are intended to be used with general-use electronic  
equipment or devices (such as audio visual equipment, office-automation equipment, commu-  
nication devices, electronic appliances and amusement devices).  
The Products specified in this document are not designed to be radiation tolerant.  
While ROHM always makes efforts to enhance the quality and reliability of its Products, a  
Product may fail or malfunction for a variety of reasons.  
Please be sure to implement in your equipment using the Products safety measures to guard  
against the possibility of physical injury, fire or any other damage caused in the event of the  
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM  
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed  
scope or not in accordance with the instruction manual.  
The Products are not designed or manufactured to be used with any equipment, device or  
system which requires an extremely high level of reliability the failure or malfunction of which  
may result in a direct threat to human life or create a risk of human injury (such as a medical  
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,  
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of  
any of the Products for the above special purposes. If a Product is intended to be used for any  
such special purpose, please contact a ROHM sales representative before purchasing.  
If you intend to export or ship overseas any Product or technology specified herein that may  
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to  
obtain a license or permit under the Law.  
Thank you for your accessing to ROHM product informations.  
More detail product informations and catalogs are available, please contact us.  
ROHM Customer Support System  
http://www.rohm.com/contact/  
www.rohm.com  
© 2009 ROHM Co., Ltd. All rights reserved.  
R0039  
A

相关型号:

DTC115EUBT106

Small Signal Bipolar Transistor,
ROHM

DTC115EUBTL

Small Signal Bipolar Transistor,
ROHM

DTC115EUS3

Mini size of Discrete semiconductor elements
ETC

DTC115EV

TRANSISTOR | 50V V(BR)CEO | 100MA I(C) | SIP
ETC

DTC115EVA

TRANSISTOR | 50V V(BR)CEO | 20MA I(C) | SIP
ETC

DTC115EVATV2

Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, ATV, 3 PIN
ROHM

DTC115EVATV3

Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, ATV, 3 PIN
ROHM

DTC115EVATV6

Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, ATV, 3 PIN
ROHM

DTC115E_11

NPN DIGITAL TRANSISTOR
UTC

DTC115E_12

NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors)
ROHM

DTC115E_15

NPN DIGITAL TRANSISTOR
UTC

DTC115G

DIGITAL TRANSISTOR
ROHM