DTC144EE3 (新产品) [ROHM]
DTC144EE3 is a digital transistor suitable for inverter, interface and driver applications.;
| 型号： | DTC144EE3 (新产品) |
| 厂家： | 
ROHM |
| 描述： | DTC144EE3 is a digital transistor suitable for inverter, interface and driver applications. 小信号双极晶体管 |
| 文件： | 总3页 (文件大小：104K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Transistors
DTC144EEB
100mA / 50V Digital transistors
(with built-in resistors)
DTC144EEB
zApplications
zDimensions (Unit : mm)
Inverter, Interface, Driver
EMT3F
1.6
0.7
zFeatures
0.26
(3)
1) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see equivalent circuit).
2) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
almost completely eliminating parasitic effects.
3) Only the on/off conditions need to be set for
operation, making the device design easy.
(1)
0.5 0.5
1.0
(2)
0.13
Each lead has same dimensions
(1) IN
(2) GND
(3) OUT
Abbreviated symbol : 26
zStructure
zEquivalent circuit
NPN silicon epitaxial planar transistor type
(Resistor built-in)
OUT
R1
IN
R2
zPackaging specifications
GND
OUT
Package
EMT3F
Taping
TL
Packaging type
Code
IN
Part No.
Basic ordering unit (pieces)
3000
GND
DTC144EEB
R1=R2=47kΩ
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Limits
Unit
Supply voltage
Input voltage
V
CC
50
V
V
V
IN
−10 to +40
Collector current
Output current
Ic(max) ∗1
100
30
mA
mA
mW
°C
Io
∗2
Power dissipation
Junction temperature
P
D
150
Tj
Tstg
150
Storage temperature
−55 to +150
°C
∗1 Characteristics of built-in transistor
∗2 Each terminal mounted on a recommended land
1/2
Transistors
DTC144EEB
zElectrical characteristics (Ta=25°C)
Parameter
Symbol Min.
Typ.
−
Max.
500
−
Unit
mV
V
Conditions
V
V
I(off)
I(on)
−
3.0
−
V
CC=5V, I
=0.3V, I
/I =10mA/0.5mA
=5V
CC=50V, V
=5V, I =5mA
CE=10V, I
O
=100µA
Input voltage
−
V
O
O
=2mA
Output voltage
Input current
V
O(on)
100
−
300
180
500
−
mV
µA
nA
−
I
O I
I
I
−
V
V
V
V
I
Output current
DC current gain
Transition frequency
Input resistance
I
O(off)
−
−
I
=0V
G
I
68
−
−
O
O
f
T
250
47
1.0
−
MHz
kΩ
−
E
= −5mA, f=100MHz
∗
R
1
32.9
0.8
61.1
1.2
−
−
Resistance ratio
R2/R
1
Characteristics of built-in transistor
∗
zElectrical characteristic curves
100
10m
1k
V
CC=5V
V
O
=0.3V
V
O
=5V
5m
500
50
Ta=100°C
25°C
−40°C
2m
1m
Ta=100°C
20
10
200
100
50
25°C
−40°C
500µ
Ta= −40°C
25°C
200µ
100µ
50µ
5
100°C
20
2
1
10
5
20µ
10µ
5µ
500m
2
1
200m
100m
2µ
1µ
0
0.5
1.0
1.5
2.0
2.5
3.0
100µ 200µ
500µ 1m
2m
5m 10m 20m
50m 100m
100µ 200µ
500µ 1m
2m
5m 10m 20m
50m 100m
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : I (A)
O
OUTPUT CURRENT : I (A)
O
Fig.2 Output current vs. input voltage
(OFF characteristics)
Fig.1 Input voltage vs. output current
(ON characteristics)
Fig.3 DC current gain vs. output
current
1
lO/lI=20
500m
Ta=100°C
25°C
−40°C
200m
100m
50m
20m
10m
5m
2m
1m
100µ 200µ
500µ 1m
2m
5m 10m 20m
50m 100m
OUTPUT CURRENT : I (A)
O
Fig.4 Output voltage vs. output
current
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
THE AMERICAS / EUPOPE / ASIA / JAPAN
ROHM Customer Support System
Contact us : webmaster@ rohm.co.jp
www.rohm.com
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Copyright © 2007 ROHM CO.,LTD.
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
Appendix1-Rev2.0
相关型号：
DTC144EETL
Small Signal Bipolar Transistor, 0.03A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, ROHS COMPLIANT, EMT3, 3 PIN
ROHM
©2020 ICPDF网 联系我们和版权申明