GNE1040TB [ROHM]
GNE1040TB是栅极耐压高达8V的150V GaN HEMT。该产品属于EcoGaN™系列,该系列产品通过更大程度地激发低导通电阻和高速开关性能,助力应用产品更节能和小型化。GNE1040TB的电源效率在1MHz的高频段也高达96.5%以上。另外,该产品采用支持大电流且具有出色散热性的通用型DFN封装,这使得安装工序的操作更容易。;型号: | GNE1040TB |
厂家: | ROHM |
描述: | GNE1040TB是栅极耐压高达8V的150V GaN HEMT。该产品属于EcoGaN™系列,该系列产品通过更大程度地激发低导通电阻和高速开关性能,助力应用产品更节能和小型化。GNE1040TB的电源效率在1MHz的高频段也高达96.5%以上。另外,该产品采用支持大电流且具有出色散热性的通用型DFN封装,这使得安装工序的操作更容易。 开关 栅 栅极 |
文件: | 总11页 (文件大小:748K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GNE1040TB
GaN Enhancement Mode Power Transistor
Datasheet
lOutline
DFN5060
VDSS
RDS(on) (Typ.)
QG, typ.
150V
40mΩ
2nC
*2
10A
ID(Tc=25℃)
QOSS@50V
Qrr
13nC
0nC
lInner circuit
lFeatures
・ 150V E-mode GaN FET
・ High Gate Voltage Maximum Rating
・ Reliable and easy to use with DFN package
lApplication
・ Half Bridge topologies
・ AC/DC Converters (secondary side)
・ Class D Audio amplifiers
・ IR LED, LD driver
lAbsolute maximum ratings (Ta = 25°C)
Parameter
Symbol
Value
6.6
Unit
A
*1
Ta = 25°C
Continuous Drain current
Tc = 25°C
ID
ID
*2
10.0
A
*3
Ta = 25°C
Pulse Drain current
26.4
A
ID,pulse
VDSS
VGSS
VGS_op
Tj
Drain - Source Voltage
Gate - Source voltage (DC)
Recommended drive voltage
Junction temperature
150
V
-2 to +8
0 / +5
150
V
V
°C
*1 Limited by maximum temperature allowed.
*2 Limited by electro migration lifetime allowed.
*3 VGS=5V, tpulse=100μs.
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
1/8
GNE1040TB
Datasheet
lElectrical characteristics (Ta = 25°C)
Values
Typ.
Parameter
Symbol
V(BR)DSS
Conditions
Unit
Min.
150
Max.
VGS = 0V, ID = 100μA
Tj = 25°C
Drain - Source breakdown
voltage
V
-
-
VGS = 0V, VDS=150V
Zero Gate voltage
Drain current
IDSS Tj = 25°C
Tj = 150°C
-
-
10
500
0.2
1
100
-
μA
IGSS+ VGS = 8V, VDS = 0V
VGS (th) VDS = VGS, ID = 1mA
Gate - Source leakage current
Gate threshold voltage
-
200
2.5
μA
0.8
V
VGS = 5V, ID = 2.0A
Static Drain - Source
on - state resistance
*4
Tj = 25°C
RDS(on)
-
-
-
40
80
1
60
-
mΩ
Ω
Tj = 150°C
RG
Gate input resistance
f = 10MHz, open drain
-
lThermal resistance
Values
Typ.
48
Parameter
Symbol
Unit
Min.
Max.
RthJA
RthJC
Thermal resistance, junction - ambient
Thermal resistance, junction - case
-
-
-
-
°C/W
°C/W
1.8
*4 Pulsed
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
2/8
GNE1040TB
Datasheet
lElectrical characteristics (Ta = 25°C)
Values
Typ.
260
Parameter
Symbol
Conditions
Unit
Min.
Max.
Ciss VGS = 0V
Coss VDS = 120V
Input capacitance
-
-
-
-
-
-
Output capacitance
110
pF
Crss
Reverse transfer capacitance
f = 1MHz
1.2
VGS = 0V
Effective output capacitance,
energy related
Co(er)
-
-
-
141
260
13
-
-
-
pF
pF
nC
VDS = 0V to 50V
VGS = 0V
Effective output capacitance,
time related
Co(tr)
VDS = 0V to 50V
VDS = 50V
VGS = 0V
*4
Output charge
Qoss
VDS = 50V
ID = 5A
*4
Total Gate charge
-
-
-
-
2.0
0.4
0.5
2.0
-
-
-
-
Qg
Qgs
Qgd
*4
*4
Gate - Source charge
Gate - Drain charge
Gate plateau voltage
nC
V
VGS = 5V/0V
Vplat
lReverse conduction electrical characteristics (Ta = 25°C)
VSD VGS = 0V, ISD=1.9A
Source-Drain reverse voltage
Reverse recovery time
-
-
-
-
2.0
0
-
-
-
-
V
ns
nC
A
*4
trr
*4
Reverse recovery charge
Peak reverse recovery current
0
Qrr
*4
0
Imm
*4 Pulsed
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
3/8
GNE1040TB
Datasheet
lElectrical characteristic curves
Fig.2 Normalized Transient Thermal
Resistance vs. Pulse Width
Fig.1 Power Dissipation Derating Curve
80
70
60
50
40
30
20
10
0
10
Ta = 25ºC
Single Pulse
Rth(j-c)(t)=r(t) x Rth(j-c)
Rth(j-c) = 1.8℃/W
1
0.1
D=1
D=0.5
D=0.2
D=0.1
D=0.05
D=0.02
D=0.01
0.01
0.001
Single Pulse
1E-6 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 1E+1
0
25
50
75 100 125 150
Case Temperature : TC [°C]
Pulse Width : PW [s]
Fig.3 Maximum Safe Operating Area(Ta=25℃)
100
Operation in this area is
limited by RDS(on)
10
PW = 1ms
1
PW = 10ms
0.1
Ta = 25ºC
Single Pulse
0.01
0.1
1
10
100
1000
Drain - Source Voltage : VDS [V]
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
4/8
GNE1040TB
Datasheet
lElectrical characteristic curves
Fig.4 Ta = 25ºC Typical Output
Characteristics
Fig.5 Ta = 150ºC Typical Output
Characteristics
50
30
5V
4V
Ta = 150ºC
Pulsed
Ta = 25ºC
Pulsed
40
5V
4V
20
10
0
30
20
10
0
3V
3V
VGS= 2V
VGS= 2V
4 5
0
1
2
3
0
1
2
3
4
5
Drain - Source Voltage : VDS [V]
Drain - Source Voltage : VDS [V]
Fig.7 Static Drain - Source On - State
Fig.6 Typical Transfer Characteristics
40
Resistance vs. Drain - Source Current
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
VDS = 5V
Pulsed
VGS = 4V
VGS = 5V
30
20
Ta= 25ºC
Ta= 150ºC
10
0
Ta = 25ºC
Pulsed
0
1
2
3
4
5
1
10
100
Gate - Source Voltage : VGS [V]
Drain Current : ID [A]
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
5/8
GNE1040TB
Datasheet
lElectrical characteristic curves
Fig.9 Typical Capacitance
vs. Drain - Source Voltage
Fig.8 3rd Quadrant Characteristics
1000
100
10
0
VGS = 0V
Pulsed
-1
Ciss
-2
-3
Coss
-4
Ta= 25ºC
Ta= 150ºC
-5
-6
Crss
-7
1
-8
Ta = 25ºC
f = 1MHz
VGS = 0V
-9
-10
0.1
-5
-4
-3
-2
-1
0
0
25
50
75 100 125 150
Drain - Source Voltage : VDS [V]
Drain - Source Voltage : VDS [V]
Fig.10 Coss Stored Energy
5
Ta = 25ºC
4
3
2
1
0
0
50
100
150
Drain - Source Voltage : VDS [V]
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
6/8
GNE1040TB
Datasheet
lElectrical characteristic curves
Fig.13 Dynamic Input Characteristics
6
*Gate Charge Waveform
5
4
3
2
Ta = 25ºC
VDD = 50V
1
ID = 5A Pulsed
0
0
0.5
1
1.5
2
2.5
3
Total Gate Charge : Qg [nC]
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
7/8
GNE1040TB
Datasheet
lMeasurement circuits and waveforms
Fig.1-1 Gate Charge Measurement Circuit
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-03B3AL100010-1-2
14.Apr.2023 Rev.002
8/8
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.
However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble
cleaning agents for cleaning residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明