MCH038FN103DK [ROHM]

Multi-layer ceramic chip capacitors; 多层陶瓷片式电容器
MCH038FN103DK
型号: MCH038FN103DK
厂家: ROHM    ROHM
描述:

Multi-layer ceramic chip capacitors
多层陶瓷片式电容器

电容器
文件: 总13页 (文件大小:219K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MCH03  
Ceramic capacitors  
Multi-layer ceramic chip capacitors  
MCH03 (0603 (0201) size, chip capacitor)  
zFeatures  
1) Ultra miniature (0.6mm×0.3mm×0.3mm), Ultra light weight (0.3mg)  
2) Suitable for mobile devices  
3) Lead-free plating terminal  
4) No polarity  
zQuick Reference  
The design and specifications are subject to change without prior notice. Please check the most recent technical  
specifications prior to placing orders or using the product. For more detail information regarding packaging style code,  
please check product designation.  
Thermal compensation  
Temperature characteristics  
Operating temp. range  
°C  
Rated voltage  
(V)  
Thickness  
(mm)  
Capacitance  
tolerance  
Part No.  
Size code  
0603  
Capacitance (pF)  
(ppm/°C)  
code  
(
)
0.5 to 2.7 (E12 Series  
3.0 to 3.9 (E12 Series  
4 to 5 (E12 Series  
5.1 to 10 (E12 Series  
11 to 100 (E12 Series  
)
)
)
)
)
0±  
250(  
CK  
)
C(± 0.25pF)  
0±  
120(CJ)  
MCH03  
A (AN)  
55 to +125  
25  
0.3 ± ±0.03  
D(± 0.5pF  
)
0± 60(CH)  
J( 5%  
±
)
∗±:±0.5pF/0.75pF/2pF/3pF/4pF/5pF/6pF/7pF/8pF/9pF available  
zHigh dielectric constant  
Temperature characteristics  
Capacitance  
tolerance  
Operating temp. range  
Rated voltage  
(V)  
Thickness  
(mm)  
Part No.  
Size code  
Capacitance (pF)  
code  
(
°C)  
25  
16  
25  
16  
6.3  
100 to 2,200 (E6 Series)  
4,700 (E3 Series)  
100 to 2,200 (E6 Series)  
4,700 (E3 Series)  
±
10%(B)  
15%  
25 to +85  
±
CN  
FN  
K (± 10%)  
55 to +125  
55 to +85  
(R) (X7R)  
0.3 ± ±0.03  
±
15%(X5R)  
10,000 (E6 Series)  
MCH03  
0603  
+30%, 80%  
25 to +85  
30 to +85  
16  
16  
10,000 (E1 Series)  
10,000 (E1 Series)  
(F)  
Z (+80%, 20%)  
+22%, 82%  
(Y5V)  
zExternal dimensions (Unit : mm)  
0.6± 0.03  
0.3± 0.03  
0.1Min. 0.17Min.  
Rev.A  
1/12  
MCH03  
Ceramic capacitors  
zProduct designation  
Code Prduct thickness  
0.3mm  
Packing specification  
Reel  
Basic ordering unit(pcs.)  
15,000  
K
Paper tape(width 8mm, pitch 2mm)  
φ180mm (7in.)  
Part No.  
Packaging Style  
M C H 0 3 3 F N 1 0 3 Z K  
Rated voltage  
Code Voltage  
Temperature characteristic code  
:Refer to quick reference table.  
Capacitance tolerance  
Nominal  
capacitance  
Code  
Tolerance  
8
3
2
6.3V  
16V  
25V  
C
D
J
±
±
±
0.25pF(0.5 to 5pF)  
0.5pF(5.1 to 10pF)  
5%(11pF or more)  
3-digit  
designation  
accordijg  
to IEC  
K
Z
±
10%  
+80%, 20%  
zProduct No.list  
Thermal compensation capacitors  
Temperature  
Rated voltage (V)  
A
AN(CG) (COG) (CH) Characteristic  
25V  
Temperature  
Rated voltage (V)  
A
AN(CG) (COG) (CH) Characteristic  
25V  
Capacitance  
(pF)  
Capacitance  
(pF)  
Tolerance Product thickness(mm)  
Product No.  
Tolerance Product thickness(mm)  
Product No.  
0.5  
0.75  
1.0  
1.2  
1.5  
1.8  
2.0  
2.2  
2.7  
3.0  
3.3  
3.9  
4.0  
4.7  
5.0  
5.6  
6
MCH032A (AN) 0R5CK  
MCH032A (AN) R75CK  
MCH032A (AN) 010CK  
MCH032A (AN) 1R2CK  
MCH032A (AN) 1R5CK  
MCH032A (AN) 1R8CK  
MCH032A (AN) 020CK  
MCH032A (AN) 2R2CK  
MCH032A (AN) 2R7CK  
MCH032A (AN) 030CK  
MCH032A (AN) 3R3CK  
MCH032A (AN) 3R9CK  
MCH032A (AN) 040CK  
MCH032A (AN) 4R7CK  
MCH032A (AN) 050CK  
MCH032A (AN) 5R6DK  
MCH032A (AN) 060DK  
MCH032A (AN) 6R8DK  
MCH032A (AN) 070DK  
MCH032A (AN) 080DK  
MCH032A (AN) 8R2DK  
MCH032A (AN) 090DK  
MCH032A (AN) 100DK  
12  
15  
18  
22  
27  
33  
39  
47  
56  
68  
82  
100  
MCH032A (AN) 120JK  
MCH032A (AN) 150JK  
MCH032A (AN) 180JK  
MCH032A (AN) 220JK  
MCH032A (AN) 270JK  
MCH032A (AN) 330JK  
MCH032A (AN) 390JK  
MCH032A (AN) 470JK  
MCH032A (AN) 560JK  
MCH032A (AN) 680JK  
MCH032A (AN) 820JK  
MCH032A (AN) 101JK  
J (  
±
5%)  
0.6 ± ±0.03  
C (± 0.25pF)  
0.6 ± ±0.03  
6.8  
7
8
8.2  
9
10  
D (± 0.5pF)  
Rev.A  
2/12  
MCH03  
Ceramic capacitors  
High dielectric constant capacitors  
Temperature  
CN (R) (B) (X7R) Characteristic  
CN (X5R) Characteristic  
Capacitance  
Rated voltage (V)  
(pF)  
25V  
16V  
6.3V  
Product No.  
Tolerance Product thickness(mm)  
Product No.  
Product No.  
100  
150  
220  
330  
470  
680  
1,000  
1,500  
2,200  
4,700  
10,000  
MCH032CN101KK  
MCH032CN151KK  
MCH032CN221KK  
MCH032CN331KK  
MCH032CN471KK  
MCH032CN681KK  
MCH032CN102KK  
MCH032CN152KK  
MCH032CN222KK  
K (±  
10%)  
0.6 ± ±0.03  
MCH033CN472KK  
MCH038CN103KK  
Temperature  
Rated voltage (V)  
FN(F) (Y5V) Characteristic  
16V  
Capacitance  
(pF)  
Tolerance Product thickness(mm)  
Z ( 80%, 20%)  
Product No.  
MCH033FN103ZK  
10,000  
+
0.6 ± ±0.03  
Rev.A  
3/12  
MCH03  
Ceramic capacitors  
Performance and test method  
No.  
Items  
Performance  
Test Method  
(As per JIS C 5101-1, JIS C 5101-10)  
1
Appearance and  
dimensions  
No marked defects shall be allowed As per 4.4 of JIS C 5101-1.  
for appearance. As per 4.5 of JIS C 5101-10  
Dimensions shall be as specified the Using a Magnifier.  
clause 4.  
Withstanding voltage  
No dielectrical breakdown or other  
damage shall be allowed.  
2
As per 4.6 of JIS C 5101-1.  
As per 4.6.4 of JIS C 5101-10  
Voltage shall be applied as per Table1.  
Table 1  
Charac-  
teristic  
Voltage  
300% Rated voltage  
250% Rated voltage  
A, AN  
CN  
FN  
Voltage shall be applied for 1 to 5s with  
50mA charging and discharging curent.  
3
4
Insulation resistance  
Capacitance  
As per 4.5 of JIS C 5101-1.  
As per 4.6.3 of JIS C 5101-10  
Measurements shall be made after  
60+/−5s period of the rated voltage  
applied.  
Not less than 10000Mor  
500MΩ±±±µF, whichever is less.  
(For products with rated voltage less  
than 16V, it is not less than 10000MΩ  
or 100MΩ±±±µF, whichever is less.)  
Capacitance shall be  
As per 4.7 of JIS C 5101-1.  
within specified tolerance range.  
As per 4.6.1 of JIS C 5101-10  
Measurements shall be made under the  
conditions specified in Table 2.  
Table 2  
Charac-  
teristic  
Frequency Voltage  
<
1000 pF  
> 1000 pF  
1+/−0.1kHz  
1+/−0.1MHz  
A, AN  
1+/−0.1Vrms. 1+/−0.1Vrms.  
CN  
FN  
1+/−0.1kHz  
1+/−0.1Vrms.  
Dielectric loss tangent  
5
<
As per 4.8 of JIS C 5101-1.  
A, AN Capacitance 30pF  
<
As per 4.6.2 of JIS C 5101-10  
Measurements shall be made under the  
conditions specified in Table 2.  
tan δ 100/(400+20C)%  
<
Capacitance 30pF  
<
tan δ 0.1%  
Rated voltage=25V  
<
C N  
tan δ 3.0%  
Rated voltage=16V  
<
tan δ 5.0%  
Rated voltage=6.3V  
<
tan δ 10.0%  
Rated voltage=16V  
<
F N  
tan δ 10.0%  
Rev.A  
4/12  
MCH03  
Ceramic capacitors  
No.  
6
Items  
Performance  
Test Method  
(As per JIS C 5101-1, JIS C 5101-10)  
<
Temperature  
characteristic  
A, AN  
Capacitance C 2pF  
0+/250ppm/°C  
Capacitance C=3pF  
0+/120ppm/°C  
As per 4.24 of JIS C 5101-1.  
As per 4.7 of JIS C 5101-10  
Temperature coefficient shall be calculated  
at 20°C and 85°C.  
<
Capacitance C 4pF  
0+/60ppm/°C  
(55°C to +125°C)  
X7R  
R
+/−15%  
As per 4.24 of JIS C 5101-1.  
As per 4.7 of JIS C 5101-10  
If required, measurements shall be made  
at a given temperature.  
C N  
(55°C to +125°C)  
+/−10%  
(25°C to +85°C)  
B
+/−15%  
(55°C to +85°C)  
X5R  
+30%, 80%  
F N  
(25°C to +85°C)  
+22%, 82%  
(30°C to +85°C)  
Solderability  
More than 3/4 of each end  
termination shall be covered with  
new solder.  
As per 4.15.2 of JIS C 5101-1.  
As per 4.11 of JIS C 5101-10  
The solder specified in JIS Z 3282 H63A  
shall be used. Ans the flux containing 25%  
rosin and ethanol solution shall be used.  
The specimens shall be immersed into the  
7
solder at 235+/−5°C for 2+/−0.5s  
So that both end terminations are  
completely under solder.  
Resistance Appearance Without mechanical damage.  
8
As per 4.14 of JIS C 5101-1.  
to solderin  
heat  
As per 4.10 of JIS C 5101-10  
The solder specified in JIS Z 3282. H63A  
shall be used.  
The specimens shall be immersed into the  
solder at 260+/−5°C for 5+/−0.5s so that  
both end terminations are completely  
under the solder.  
Pre-heating at 150+/−10°C for 1 to 2min  
Initial measurements prior to test shall be  
performed after the thermal  
Change  
rate from  
initial value  
Within +/−2.5% or  
+/−0.25pF whichever  
is larger.  
A, AN  
C N  
Within +/−7.5%  
Within +/−20%  
F N  
Pre-conditioning specified in Remarks (1).  
Final measurements shall be made after the  
specimens have been left at room  
temperature as per Table3.  
Dielectric  
loss  
tangent  
Within specified initial value.  
Within specified initial value.  
Table3  
Insulation  
resistance  
Charac-  
teristic  
Time  
A, AN  
24+/−2 h  
48+/−4 h  
Withstanding No defects shall be allowed.  
voltage  
CN, FN  
End termination  
adherence  
Without peeling or sign of  
peeling shall be allowed  
on the end terminations.  
9
As per 4.13 of JIS C 5101-1.  
As per 4.8 ofJIS C 5101-10  
A 2N weight for 10+/−1s shall be applied  
to the soldered specimens as shown by the  
arrow mark in the below sketch.  
Applied pressure  
Substrate  
Capacitor  
Rev.A  
5/12  
MCH03  
Ceramic capacitors  
No.  
10  
Items  
Performance  
Test Method  
(As per JIS C 5101-1, JIS C 5101-10)  
Bending  
strength  
Appearance Without mechanical damage.  
As per 4.35 of JIS C 5101-1.  
As per 4.9 of JIS C 5101-10  
Glass epoxy board with soldered  
specimens shall be bent till 1mm by  
1.0mm/s.  
Vibration  
Appearance Without mechanical damage.  
11  
As per 4.17 of JIS C 5101-1  
The specimens shall be soldered on the  
specified test jig.  
Initial measurements shall be made after  
the thermal pre-conditioning specified in  
Remarks(1).  
Capacitance shall be  
Change  
A, AN  
within specified  
tolerance range.  
rate from  
initial value  
Final measurements shall be made after the  
specimens have been left at room  
temperature as per Table3.  
[Condition]  
Directions : 2h each X, Y and Z directions  
Total : 6h  
Frequency range : 10 to 55 to 10Hz(1min)  
Applitude : 1.5mm  
(shall not exceed acceleration196m/s2)  
C N  
Within +/−7.5%  
Within +/−20%  
F N  
Dielectric  
loss  
tangent  
Within specified initial value.  
Table3  
Charac-  
teristic  
Time  
A, AN  
24+/−2 h  
48+/−4 h  
CN, FN  
Temperature Appearance Without mechanical damage.  
cycling  
12  
As per 4.16 of JIS C 5101-1  
As per 4.12 of JIS C 5101-10  
Within +/−2.5% or  
+/−0.25pF whichever  
is larger.  
The specimens shall be soldered on the test  
jig shown in Remarks.  
Temperature cycle : 5cycles Initial  
measurements prior to test shall be  
performed after the thermal  
per-conditioning specified in Remarks (1).  
Final measurements shall be made after the  
specimens have been left at room  
temperature as per Table3.  
Change  
rate from  
initial value  
A, AN  
Rated  
voltage  
25V,16V  
Within +/−7.5%  
Within +/−10.0%  
Within +/−20%  
C N  
Rated  
voltage  
6.3V  
Test condition  
F N  
Step  
Temp. (°C)  
Min operating temp.  
Room temp.  
Time (min)  
1
2
3
4
30+/−3  
Dielectric  
loss  
tangent  
Within specified initial value.  
Within specified initial value.  
<
3
Max operating temp.  
Room temp.  
30+/−3  
Insulation  
resistance  
<
3
Table3  
Withstanding No defects shall be allowed.  
voltage  
Charac-  
teristic  
A, AN  
Time  
24+/−2 h  
48+/−4 h  
CN, FN  
Rev.A  
6/12  
MCH03  
Ceramic capacitors  
No.  
13  
Items  
Performance  
Test Method  
(As per JIS C 5101-1, JIS C 5101-10)  
Humidity  
(Steady)  
Appearance Without mechanical damage.  
As per 4.22 of JIS C 5101-1  
JIS C 5101-10  
Test temperature : 60+/−2°C  
Relative humidity : 90 to 95%  
: 500 +24/−0 h  
Initial measurements prior to test shall  
be made after the voltage  
pre-conditioning specified in  
Remarks (2).  
Final measurements have been left at  
room temperature as per Table3.  
Within +/−5.0% or  
+/−0.5pF whichever  
is larger.  
Change  
rate from  
initial value  
A, AN  
Rated  
Test time  
Within +/−12.5%  
Within +/−25.0%  
voltage  
25V,16V  
Rated  
voltage  
6.3V  
C N  
F N  
Within +/−30.0%  
Dielectric  
tangent  
<
Table3  
A, AN  
C N  
tan δ 0.3%  
Less than 200% of  
initial spec.  
Charac-  
Time  
teristic  
A, AN  
Less than 150% of  
initial spec.  
24+/−2 h  
48+/−4 h  
F N  
CN, FN  
Insulation  
resistance  
Not less than 1000MΩ±or  
50MΩ±±±µF, whichever is less.  
(For products with rated  
voltage less than 16V, it is not less  
than 1000MΩ±or 10MΩ±±±µF,  
whichever is less.)  
14 Humidity  
life test  
Appearance Without mechanical damage.  
As per 4.22 of JIS C 5101-1  
As per 4.14 of JIS C 5101-10  
Test temperature : 60+/−2°C  
Relative humidity : 90 to 95%  
Voltage : Rated voltage  
Test time : 500 +24/−0 h  
Initial measurements prior to test shall  
be made after the voltage  
pre-conditioning specified in  
Remarks (2).  
Final measurements shall be made after  
the specimens have been left at room  
temperature as per Table3.  
Change  
rate from  
initial value  
Within +/−7.5% or  
+/−0.75pF whichever  
is larger.  
A, AN  
Rated  
Within +/−12.5%  
voltage  
25V,16V  
C N  
Rated  
voltage  
6.3V  
Within +/−25.0%  
Within +/−30.0%  
F N  
<
Dielectric  
loss  
tangent  
A, AN  
tan δ 0.5%  
Less than 200% of  
initial spec.  
Table3  
C N  
Charac-  
Time  
Less than 150% of  
initial spec.  
F N  
teristic  
A, AN  
24+/−2 h  
48+/−4 h  
Insulation  
resistance  
Not less than 500MΩ±or  
CN, FN  
25MΩ±±±µF, whichever is less.  
(For products with rated voltage less  
than 16V, it is not less than 500mΩ  
or 5MΩ±±±µF, whichever is less.)  
Rev.A  
7/12  
MCH03  
Ceramic capacitors  
No.  
Items  
Performance  
Test Method  
(As per JIS C 5101-1, JIS C 5101-10)  
15 Heat life  
test  
Appearance Without mechanical damage.  
As per 4.23 of JIS C 5101-1.  
As per 4.15 of JIS C 5101-10  
Within +/−3.0% or  
+/−0.3pF whichever  
is larger.  
Change  
rate from  
initial value  
A, AN  
Test  
Voltage  
Test  
time (h)  
temperature(°C)  
Rated  
voltage  
25V,16V  
Within +/−15.0%  
Within +/−25.0%  
Within +/−30.0%  
A, AN  
CN  
125  
200%  
Rated  
voltage  
200%  
Rated  
voltage  
1000  
±±±±+48/−0  
C N  
Rated  
voltage  
6.3V  
85  
(B, X5R)  
1000  
±±±±+48/−0  
F N  
200%  
Rated  
voltage  
125  
(R, X7R)  
Dielectric  
loss  
tangent  
<
tan δ 0.3%  
A, AN  
C N  
FN  
85  
200%  
Rated  
voltage  
1000  
±±±±+48/−0  
Less than 200% of  
initial spec.  
Less than 150% of  
initial spec.  
Initial measurements prior to test shall be  
made after the voltage pre-conditioning  
specified in Remarks (2).  
Final measurements shall be made after  
the specimens have been left at room  
F N  
Insulation  
resistance  
Not less than 1000MΩ±or  
50MΩ±±±µF, whichever is less.  
(For products with rated voltage less  
than 16V, it is not less than 1000mtemperature  
or 10MΩ±±±µF, whichever is less.)  
Table3  
Time  
Charac-  
teristic  
A, AN  
24+/−2 h  
48+/−4 h  
CN, FN  
[Remarks]  
Pre-conditioning  
If specified in test method of as per 3(Performance and test merhod), capacitors of CN, FN  
characteristics shall be pre-conditionded as follows.  
(1) Thermal pre-conditioning  
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C  
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h  
(2) Voltage pre-conditioning  
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens  
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h  
< T e s t j i g >  
Soldering  
Glass epoxy  
substrate  
Rev.A  
8/12  
MCH03  
Ceramic capacitors  
zPackaging specifications  
Taping dimensions  
Reel dimensions  
t
d
φ
J
E
D
+1.0  
0  
9.0  
Pulling direction  
A
C
B
t
1
F
G
H
Pulling direction  
Symbol  
C
D
E
F
G
H
J
d
t
t1  
0.37  
0.42  
0.5  
8.0  
3.5  
1.75  
2.0  
2.0  
4.0  
φ1.5  
Dimensions  
+/±−0.2 +/±−0.05 +/±−0.1 +/±−0.05 +/±−0.05 +/±−0.1 +0.1/±−0  
+/±−0.02 +/±−0.02 MAX.  
Label pasting  
(Unit : mm)  
Symbol  
A
B
As per EIAJ ET7200A  
Style  
MCH03  
0.37  
0.67  
+/±−0.03  
+/±−0.03  
(Unit : mm)  
(Unit : mm)  
(1) The quantity for one reel is as bellows.  
Paper tape  
Quantity Symbol  
MCH03 15,000 pcs.  
Kind of reel  
Series  
φ180 reel  
K
(2) When the tape is pulled out towards the operator with the cover tape facing  
upward, the feeding holes shall be found on the right portion of the tape.  
(3) Specification of beginning and ending of the tape are as follows.  
Ending(reel's center)  
Beginning(reel's round)  
: Approx. 300mm (no chips)  
: Approx. 270mm (no chips)  
: Approx. 30mm (no pasted tape)  
: Approx. 260mm (cover tape only)  
(4) No juncture of tape shall be allowed.  
(5) The share strength of tape shall be more than 5N at the break down strength.  
(6) The peel strength of the cover tape shall be 0.1 to 0.7(N) when the cover tape are  
peeled 0 to 15° degree from the surface.  
(7) The number of missing components shall not exceed 0.1% of the total number  
of components (marked number) or one whichever is the larger, and no consecutive  
missing exceeding two is allowed.  
(8) The reels made from resin shall be used, as per EIAJ ET-7200A.  
zMarking  
No marking shall be performed on the chip.  
Trademark, parts number, quantity, lot No. , and country of origin shall be labeled on each reel, bulk case.  
zNumbering system for LOT No.  
03  
(1)  
01  
(2)  
A0001  
(3)  
J
(4)  
Example  
(1) The end of the Christian Era < two digits> of production finish.  
(2) Week in completing part of production finish.  
(3) Manufacture continuity number.  
(4) The symbol of manufacturing plant.  
Rev.A  
9/12  
MCH03  
Ceramic capacitors  
zLabel expression  
The Figure below is label expression  
< Label Example > Part Number : MCH032A470JK  
MCH032A470JK  
□ꢀ15,000pcs ꢀ0501 00001F  
K.SATO  
0123456789ABCDEFGHI J0123456789ABCDEFGHI J  
JAPAN  
Excellence in Electronics ROHM  
Part Number  
Division cord  
Quantity  
Lot No.  
The Country of origin  
Inspector  
QR code  
Trademark  
Rev.A  
10/12  
MCH03  
Ceramic capacitors  
zPacking method  
1) φ180mm Reel  
EIAJ cole  
(reel)  
C'  
B'  
2
Label  
A'  
[width of 9mm  
: 5reel]  
1
A
(interior box of R-26)  
Packing slip  
B
C
(R-26)  
< Packaging unit >  
Symbol  
Dimensions  
Packaging  
K
5
R-26  
195  
interior box of R-26  
185  
Quantity of reel in  
interior box  
Quantity of reel in  
box of R-26  
A (A’)  
B (B’)  
C (C’)  
255  
190  
60  
20  
185  
(Unit : mm)  
< Appearance >  
Carton  
< Accumulation >  
You must do accumulation by ten boxes  
< Packaging slip >  
1. Customer  
2. Parts number  
3. Quantity  
4. Box quantity  
5. Trade mark  
zWeight / Piece  
(Unit : mg)  
Size  
Item  
Thickness  
0.3mm  
Characteristic  
Weight / Piece  
A, AN  
CN  
0.3  
0.3  
0.3  
0603 (0201)  
MCH03  
FN  
(Note) The measured values in the table are for reference only.  
Actual weight of these chips may very slightly lot by lot.  
Rev.A  
11/12  
MCH03  
Ceramic capacitors  
zElectrical characteristics  
A (C0G) Characteristics  
g
5
1000000  
100000  
10000  
1000  
100  
4
3
2
1
0
0.5pF  
1  
2  
3  
4  
5  
10pF  
10  
1
0.1  
50  
0
50  
100  
1
10  
100  
1000  
10000  
FREQUENCY (MHz)  
TEMPERATURE (°C)  
Fig.2 Impedance-frequency  
characteristics  
Fig.1 Capacitance-temperature  
characteristics  
CN (X7R) Characteristics  
g
30  
20  
1000000  
100000  
10000  
1000  
100  
10  
0
10  
20  
30  
10  
1000pF  
10  
5
1
0.1  
80  
40  
0
40  
80  
120  
160  
1
10  
100  
1000  
10000  
FREQUENCY (MHz)  
TEMPERATURE : (°C)  
Fig.4 Impedance-frequency  
characteristics  
Fig.3 Capacitance-temperature  
characteristics  
FN (Y5V) Characteristics  
g
20  
10  
0
10  
20  
30  
40  
50  
60  
70  
80  
60  
50  
40  
30  
20  
10  
80  
40  
0
40  
80  
120  
160  
TEMPERATURE : (°C)  
Fig.5 Capacitance-temperature  
characteristics  
Rev.A  
12/12  
Appendix  
Notes  
No technical content pages of this document may be reproduced in any form or transmitted by any  
means without prior permission of ROHM CO.,LTD.  
The contents described herein are subject to change without notice. The specifications for the  
product described in this document are for reference only. Upon actual use, therefore, please request  
that specifications to be separately delivered.  
Application circuit diagrams and circuit constants contained herein are shown as examples of standard  
use and operation. Please pay careful attention to the peripheral conditions when designing circuits  
and deciding upon circuit constants in the set.  
Any data, including, but not limited to application circuit diagrams information, described herein  
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM  
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any  
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of  
whatsoever nature in the event of any such infringement, or arising from or connected with or related  
to the use of such devices.  
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or  
otherwise dispose of the same, no express or implied right or license to practice or commercially  
exploit any intellectual property rights or other proprietary rights owned or controlled by  
ROHM CO., LTD. is granted to any such buyer.  
Products listed in this document are no antiradiation design.  
The products listed in this document are designed to be used with ordinary electronic equipment or devices  
(such as audio visual equipment, office-automation equipment, communications devices, electrical  
appliances and electronic toys).  
Should you intend to use these products with equipment or devices which require an extremely high level of  
reliability and the malfunction of with would directly endanger human life (such as medical instruments,  
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other  
safety devices), please be sure to consult with our sales representative in advance.  
About Export Control Order in Japan  
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control  
Order in Japan.  
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)  
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.  
Appendix1-Rev1.1  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY