MCH038FN103JK [ROHM]
Multi-layer ceramic chip capacitors; 多层陶瓷片式电容器型号: | MCH038FN103JK |
厂家: | ROHM |
描述: | Multi-layer ceramic chip capacitors |
文件: | 总13页 (文件大小:219K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCH03
Ceramic capacitors
Multi-layer ceramic chip capacitors
MCH03 (0603 (0201) size, chip capacitor)
zFeatures
1) Ultra miniature (0.6mm×0.3mm×0.3mm), Ultra light weight (0.3mg)
2) Suitable for mobile devices
3) Lead-free plating terminal
4) No polarity
zQuick Reference
The design and specifications are subject to change without prior notice. Please check the most recent technical
specifications prior to placing orders or using the product. For more detail information regarding packaging style code,
please check product designation.
Thermal compensation
Temperature characteristics
Operating temp. range
°C
Rated voltage
(V)
Thickness
(mm)
Capacitance
tolerance
Part No.
Size code
0603
Capacitance (pF)
(ppm/°C)
code
(
)
∗
∗
∗
∗
0.5 to 2.7 (E12 Series
3.0 to 3.9 (E12 Series
4 to 5 (E12 Series
5.1 to 10 (E12 Series
11 to 100 (E12 Series
)
)
)
)
)
0±
250(
CK
)
C(± 0.25pF)
0±
120(CJ)
MCH03
A (AN)
−55 to +125
25
0.3 ± ±0.03
D(± 0.5pF
)
0± 60(CH)
J( 5%
±
)
∗±:±0.5pF/0.75pF/2pF/3pF/4pF/5pF/6pF/7pF/8pF/9pF available
zHigh dielectric constant
Temperature characteristics
Capacitance
tolerance
Operating temp. range
Rated voltage
(V)
Thickness
(mm)
Part No.
Size code
Capacitance (pF)
code
(
°C)
25
16
25
16
6.3
100 to 2,200 (E6 Series)
4,700 (E3 Series)
100 to 2,200 (E6 Series)
4,700 (E3 Series)
±
10%(B)
15%
−25 to +85
±
CN
FN
K (± 10%)
−55 to +125
−55 to +85
(R) (X7R)
0.3 ± ±0.03
±
15%(X5R)
10,000 (E6 Series)
MCH03
0603
+30%, −80%
−25 to +85
−30 to +85
16
16
10,000 (E1 Series)
10,000 (E1 Series)
(F)
Z (+80%, −20%)
+22%, −82%
(Y5V)
zExternal dimensions (Unit : mm)
0.6± 0.03
0.3± 0.03
0.1Min. 0.17Min.
Rev.A
1/12
MCH03
Ceramic capacitors
zProduct designation
Code Prduct thickness
0.3mm
Packing specification
Reel
Basic ordering unit(pcs.)
15,000
K
Paper tape(width 8mm, pitch 2mm)
φ180mm (7in.)
Part No.
Packaging Style
M C H 0 3 3 F N 1 0 3 Z K
Rated voltage
Code Voltage
Temperature characteristic code
:Refer to quick reference table.
Capacitance tolerance
Nominal
capacitance
Code
Tolerance
8
3
2
6.3V
16V
25V
C
D
J
±
±
±
0.25pF(0.5 to 5pF)
0.5pF(5.1 to 10pF)
5%(11pF or more)
3-digit
designation
accordijg
to IEC
K
Z
±
10%
+80%, −20%
zProduct No.list
•Thermal compensation capacitors
Temperature
Rated voltage (V)
A
AN(CG) (COG) (CH) Characteristic
25V
Temperature
Rated voltage (V)
A
AN(CG) (COG) (CH) Characteristic
25V
Capacitance
(pF)
Capacitance
(pF)
Tolerance Product thickness(mm)
Product No.
Tolerance Product thickness(mm)
Product No.
0.5
0.75
1.0
1.2
1.5
1.8
2.0
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6
MCH032A (AN) 0R5CK
MCH032A (AN) R75CK
MCH032A (AN) 010CK
MCH032A (AN) 1R2CK
MCH032A (AN) 1R5CK
MCH032A (AN) 1R8CK
MCH032A (AN) 020CK
MCH032A (AN) 2R2CK
MCH032A (AN) 2R7CK
MCH032A (AN) 030CK
MCH032A (AN) 3R3CK
MCH032A (AN) 3R9CK
MCH032A (AN) 040CK
MCH032A (AN) 4R7CK
MCH032A (AN) 050CK
MCH032A (AN) 5R6DK
MCH032A (AN) 060DK
MCH032A (AN) 6R8DK
MCH032A (AN) 070DK
MCH032A (AN) 080DK
MCH032A (AN) 8R2DK
MCH032A (AN) 090DK
MCH032A (AN) 100DK
12
15
18
22
27
33
39
47
56
68
82
100
MCH032A (AN) 120JK
MCH032A (AN) 150JK
MCH032A (AN) 180JK
MCH032A (AN) 220JK
MCH032A (AN) 270JK
MCH032A (AN) 330JK
MCH032A (AN) 390JK
MCH032A (AN) 470JK
MCH032A (AN) 560JK
MCH032A (AN) 680JK
MCH032A (AN) 820JK
MCH032A (AN) 101JK
J (
±
5%)
0.6 ± ±0.03
C (± 0.25pF)
0.6 ± ±0.03
6.8
7
8
8.2
9
10
D (± 0.5pF)
Rev.A
2/12
MCH03
Ceramic capacitors
•High dielectric constant capacitors
Temperature
CN (R) (B) (X7R) Characteristic
CN (X5R) Characteristic
Capacitance
Rated voltage (V)
(pF)
25V
16V
6.3V
Product No.
Tolerance Product thickness(mm)
Product No.
Product No.
100
150
220
330
470
680
1,000
1,500
2,200
4,700
10,000
MCH032CN101KK
MCH032CN151KK
MCH032CN221KK
MCH032CN331KK
MCH032CN471KK
MCH032CN681KK
MCH032CN102KK
MCH032CN152KK
MCH032CN222KK
K (±
10%)
0.6 ± ±0.03
MCH033CN472KK
MCH038CN103KK
Temperature
Rated voltage (V)
FN(F) (Y5V) Characteristic
16V
Capacitance
(pF)
Tolerance Product thickness(mm)
Z ( 80%, 20%)
Product No.
MCH033FN103ZK
10,000
+
−
0.6 ± ±0.03
Rev.A
3/12
MCH03
Ceramic capacitors
•Performance and test method
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
1
Appearance and
dimensions
No marked defects shall be allowed As per 4.4 of JIS C 5101-1.
for appearance. As per 4.5 of JIS C 5101-10
Dimensions shall be as specified the Using a Magnifier.
clause 4.
Withstanding voltage
No dielectrical breakdown or other
damage shall be allowed.
2
As per 4.6 of JIS C 5101-1.
As per 4.6.4 of JIS C 5101-10
Voltage shall be applied as per Table1.
Table 1
Charac-
teristic
Voltage
300% Rated voltage
250% Rated voltage
A, AN
CN
FN
Voltage shall be applied for 1 to 5s with
50mA charging and discharging curent.
3
4
Insulation resistance
Capacitance
As per 4.5 of JIS C 5101-1.
As per 4.6.3 of JIS C 5101-10
Measurements shall be made after
60+/−5s period of the rated voltage
applied.
Not less than 10000MΩ or
500MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 10000MΩ
or 100MΩ±±±µF, whichever is less.)
Capacitance shall be
As per 4.7 of JIS C 5101-1.
within specified tolerance range.
As per 4.6.1 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
Table 2
Charac-
teristic
Frequency Voltage
<
1000 pF
> 1000 pF
1+/−0.1kHz
−
1+/−0.1MHz
A, AN
1+/−0.1Vrms. 1+/−0.1Vrms.
CN
FN
1+/−0.1kHz
1+/−0.1Vrms.
Dielectric loss tangent
5
<
As per 4.8 of JIS C 5101-1.
A, AN Capacitance 30pF
<
As per 4.6.2 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
tan δ 100/(400+20C)%
−
<
Capacitance 30pF
−
<
tan δ 0.1%
−
Rated voltage=25V
<
C N
tan δ 3.0%
−
Rated voltage=16V
<
tan δ 5.0%
−
Rated voltage=6.3V
<
tan δ 10.0%
−
Rated voltage=16V
<
F N
tan δ 10.0%
−
Rev.A
4/12
MCH03
Ceramic capacitors
No.
6
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
<
Temperature
characteristic
A, AN
Capacitance C 2pF
0+/−250ppm/°C
Capacitance C=3pF
0+/−120ppm/°C
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
Temperature coefficient shall be calculated
−
at 20°C and 85°C.
<
Capacitance C 4pF
−
0+/−60ppm/°C
(−55°C to +125°C)
X7R
R
+/−15%
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
If required, measurements shall be made
at a given temperature.
C N
(−55°C to +125°C)
+/−10%
(−25°C to +85°C)
B
+/−15%
(−55°C to +85°C)
X5R
+30%, −80%
F N
(−25°C to +85°C)
+22%, −82%
(−30°C to +85°C)
Solderability
More than 3/4 of each end
termination shall be covered with
new solder.
As per 4.15.2 of JIS C 5101-1.
As per 4.11 of JIS C 5101-10
The solder specified in JIS Z 3282 H63A
shall be used. Ans the flux containing 25%
rosin and ethanol solution shall be used.
The specimens shall be immersed into the
7
solder at 235+/−5°C for 2+/−0.5s
So that both end terminations are
completely under solder.
Resistance Appearance Without mechanical damage.
8
As per 4.14 of JIS C 5101-1.
to solderin
heat
As per 4.10 of JIS C 5101-10
The solder specified in JIS Z 3282. H63A
shall be used.
The specimens shall be immersed into the
solder at 260+/−5°C for 5+/−0.5s so that
both end terminations are completely
under the solder.
Pre-heating at 150+/−10°C for 1 to 2min
Initial measurements prior to test shall be
performed after the thermal
Change
rate from
initial value
Within +/−2.5% or
+/−0.25pF whichever
is larger.
A, AN
C N
Within +/−7.5%
Within +/−20%
F N
Pre-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
Dielectric
loss
tangent
Within specified initial value.
Within specified initial value.
Table3
Insulation
resistance
Charac-
teristic
Time
A, AN
24+/−2 h
48+/−4 h
Withstanding No defects shall be allowed.
voltage
CN, FN
End termination
adherence
Without peeling or sign of
peeling shall be allowed
on the end terminations.
9
As per 4.13 of JIS C 5101-1.
As per 4.8 ofJIS C 5101-10
A 2N weight for 10+/−1s shall be applied
to the soldered specimens as shown by the
arrow mark in the below sketch.
Applied pressure
Substrate
Capacitor
Rev.A
5/12
MCH03
Ceramic capacitors
No.
10
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
Bending
strength
Appearance Without mechanical damage.
As per 4.35 of JIS C 5101-1.
As per 4.9 of JIS C 5101-10
Glass epoxy board with soldered
specimens shall be bent till 1mm by
1.0mm/s.
Vibration
Appearance Without mechanical damage.
11
As per 4.17 of JIS C 5101-1
The specimens shall be soldered on the
specified test jig.
Initial measurements shall be made after
the thermal pre-conditioning specified in
Remarks(1).
Capacitance shall be
Change
A, AN
within specified
tolerance range.
rate from
initial value
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
[Condition]
Directions : 2h each X, Y and Z directions
Total : 6h
Frequency range : 10 to 55 to 10Hz(1min)
Applitude : 1.5mm
(shall not exceed acceleration196m/s2)
C N
Within +/−7.5%
Within +/−20%
F N
Dielectric
loss
tangent
Within specified initial value.
Table3
Charac-
teristic
Time
A, AN
24+/−2 h
48+/−4 h
CN, FN
Temperature Appearance Without mechanical damage.
cycling
12
As per 4.16 of JIS C 5101-1
As per 4.12 of JIS C 5101-10
Within +/−2.5% or
+/−0.25pF whichever
is larger.
The specimens shall be soldered on the test
jig shown in Remarks.
Temperature cycle : 5cycles Initial
measurements prior to test shall be
performed after the thermal
per-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
Change
rate from
initial value
A, AN
Rated
voltage
25V,16V
Within +/−7.5%
Within +/−10.0%
Within +/−20%
C N
Rated
voltage
6.3V
Test condition
F N
Step
Temp. (°C)
Min operating temp.
Room temp.
Time (min)
1
2
3
4
30+/−3
Dielectric
loss
tangent
Within specified initial value.
Within specified initial value.
<
3
−
Max operating temp.
Room temp.
30+/−3
Insulation
resistance
<
3
−
Table3
Withstanding No defects shall be allowed.
voltage
Charac-
teristic
A, AN
Time
24+/−2 h
48+/−4 h
CN, FN
Rev.A
6/12
MCH03
Ceramic capacitors
No.
13
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
Humidity
(Steady)
Appearance Without mechanical damage.
As per 4.22 of JIS C 5101-1
JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
: 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements have been left at
room temperature as per Table3.
Within +/−5.0% or
+/−0.5pF whichever
is larger.
Change
rate from
initial value
A, AN
Rated
Test time
Within +/−12.5%
Within +/−25.0%
voltage
25V,16V
Rated
voltage
6.3V
C N
F N
Within +/−30.0%
Dielectric
tangent
<
Table3
A, AN
C N
tan δ 0.3%
−
Less than 200% of
initial spec.
Charac-
Time
teristic
A, AN
Less than 150% of
initial spec.
24+/−2 h
48+/−4 h
F N
CN, FN
Insulation
resistance
Not less than 1000MΩ±or
50MΩ±±±µF, whichever is less.
(For products with rated
voltage less than 16V, it is not less
than 1000MΩ±or 10MΩ±±±µF,
whichever is less.)
14 Humidity
life test
Appearance Without mechanical damage.
As per 4.22 of JIS C 5101-1
As per 4.14 of JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Voltage : Rated voltage
Test time : 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature as per Table3.
Change
rate from
initial value
Within +/−7.5% or
+/−0.75pF whichever
is larger.
A, AN
Rated
Within +/−12.5%
voltage
25V,16V
C N
Rated
voltage
6.3V
Within +/−25.0%
Within +/−30.0%
F N
<
Dielectric
loss
tangent
A, AN
tan δ 0.5%
−
Less than 200% of
initial spec.
Table3
C N
Charac-
Time
Less than 150% of
initial spec.
F N
teristic
A, AN
24+/−2 h
48+/−4 h
Insulation
resistance
Not less than 500MΩ±or
CN, FN
25MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 500mΩ
or 5MΩ±±±µF, whichever is less.)
Rev.A
7/12
MCH03
Ceramic capacitors
No.
Items
Performance
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
15 Heat life
test
Appearance Without mechanical damage.
As per 4.23 of JIS C 5101-1.
As per 4.15 of JIS C 5101-10
Within +/−3.0% or
+/−0.3pF whichever
is larger.
Change
rate from
initial value
A, AN
Test
Voltage
Test
time (h)
temperature(°C)
Rated
voltage
25V,16V
Within +/−15.0%
Within +/−25.0%
Within +/−30.0%
A, AN
CN
125
200%
Rated
voltage
200%
Rated
voltage
1000
±±±±+48/−0
C N
Rated
voltage
6.3V
85
(B, X5R)
1000
±±±±+48/−0
F N
200%
Rated
voltage
125
(R, X7R)
Dielectric
loss
tangent
<
tan δ 0.3%
A, AN
C N
−
FN
85
200%
Rated
voltage
1000
±±±±+48/−0
Less than 200% of
initial spec.
Less than 150% of
initial spec.
Initial measurements prior to test shall be
made after the voltage pre-conditioning
specified in Remarks (2).
Final measurements shall be made after
the specimens have been left at room
F N
Insulation
resistance
Not less than 1000MΩ±or
50MΩ±±±µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 1000mΩ temperature
or 10MΩ±±±µF, whichever is less.)
Table3
Time
Charac-
teristic
A, AN
24+/−2 h
48+/−4 h
CN, FN
[Remarks]
Pre-conditioning
If specified in test method of as per 3(Performance and test merhod), capacitors of CN, FN
characteristics shall be pre-conditionded as follows.
(1) Thermal pre-conditioning
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h
(2) Voltage pre-conditioning
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h
< T e s t j i g >
Soldering
Glass epoxy
substrate
Rev.A
8/12
MCH03
Ceramic capacitors
zPackaging specifications
Taping dimensions
Reel dimensions
t
d
φ
J
E
D
+1.0
−0
9.0
Pulling direction
A
C
B
t
1
F
G
H
Pulling direction
Symbol
C
D
E
F
G
H
J
d
t
t1
0.37
0.42
0.5
8.0
3.5
1.75
2.0
2.0
4.0
φ1.5
Dimensions
+/±−0.2 +/±−0.05 +/±−0.1 +/±−0.05 +/±−0.05 +/±−0.1 +0.1/±−0
+/±−0.02 +/±−0.02 MAX.
Label pasting
(Unit : mm)
Symbol
A
B
As per EIAJ ET−7200A
Style
MCH03
0.37
0.67
+/±−0.03
+/±−0.03
(Unit : mm)
(Unit : mm)
(1) The quantity for one reel is as bellows.
Paper tape
Quantity Symbol
MCH03 15,000 pcs.
Kind of reel
Series
φ180 reel
K
(2) When the tape is pulled out towards the operator with the cover tape facing
upward, the feeding holes shall be found on the right portion of the tape.
(3) Specification of beginning and ending of the tape are as follows.
Ending(reel's center)
Beginning(reel's round)
: Approx. 300mm (no chips)
: Approx. 270mm (no chips)
: Approx. 30mm (no pasted tape)
: Approx. 260mm (cover tape only)
(4) No juncture of tape shall be allowed.
(5) The share strength of tape shall be more than 5N at the break down strength.
(6) The peel strength of the cover tape shall be 0.1 to 0.7(N) when the cover tape are
peeled 0 to 15° degree from the surface.
(7) The number of missing components shall not exceed 0.1% of the total number
of components (marked number) or one whichever is the larger, and no consecutive
missing exceeding two is allowed.
(8) The reels made from resin shall be used, as per EIAJ ET-7200A.
zMarking
No marking shall be performed on the chip.
Trademark, parts number, quantity, lot No. , and country of origin shall be labeled on each reel, bulk case.
zNumbering system for LOT No.
03
(1)
01
(2)
A0001
(3)
J
(4)
Example
(1) The end of the Christian Era < two digits> of production finish.
(2) Week in completing part of production finish.
(3) Manufacture continuity number.
(4) The symbol of manufacturing plant.
Rev.A
9/12
MCH03
Ceramic capacitors
zLabel expression
The Figure below is label expression
< Label Example > Part Number : MCH032A470JK
④
①
MCH032A470JK
⑦
⑧
②
③
□ꢀ15,000pcs ꢀ0501 00001F
K.SATO
0123456789ABCDEFGHI J0123456789ABCDEFGHI J
JAPAN
⑤
Excellence in Electronics ROHM
⑥
① Part Number
② Division cord
③ Quantity
④ Lot No.
⑤ The Country of origin
⑥ Inspector
⑦ QR code
⑧ Trademark
Rev.A
10/12
MCH03
Ceramic capacitors
zPacking method
1) φ180mm Reel
EIAJ cole
(reel)
C'
B'
2
Label
A'
[width of 9mm
: 5reel]
1
A
(interior box of R-26)
Packing slip
B
C
(R-26)
< Packaging unit >
Symbol
Dimensions
Packaging
K
5
R-26
195
interior box of R-26
185
Quantity of reel in
interior box
Quantity of reel in
box of R-26
A (A’)
B (B’)
C (C’)
255
190
60
20
185
(Unit : mm)
< Appearance >
Carton
< Accumulation >
You must do accumulation by ten boxes
< Packaging slip >
1. Customer
2. Parts number
3. Quantity
4. Box quantity
5. Trade mark
zWeight / Piece
(Unit : mg)
Size
Item
Thickness
0.3mm
Characteristic
Weight / Piece
A, AN
CN
0.3
0.3
0.3
0603 (0201)
MCH03
FN
(Note) The measured values in the table are for reference only.
Actual weight of these chips may very slightly lot by lot.
Rev.A
11/12
MCH03
Ceramic capacitors
zElectrical characteristics
A (C0G) Characteristics
g
5
1000000
100000
10000
1000
100
4
3
2
1
0
0.5pF
−1
−2
−3
−4
−5
10pF
10
1
0.1
−50
0
50
100
1
10
100
1000
10000
FREQUENCY (MHz)
TEMPERATURE (°C)
Fig.2 Impedance-frequency
characteristics
Fig.1 Capacitance-temperature
characteristics
CN (X7R) Characteristics
g
30
20
1000000
100000
10000
1000
100
10
0
−10
−20
−30
10
1000pF
10
5
1
0.1
−80
−40
0
40
80
120
160
1
10
100
1000
10000
FREQUENCY (MHz)
TEMPERATURE : (°C)
Fig.4 Impedance-frequency
characteristics
Fig.3 Capacitance-temperature
characteristics
FN (Y5V) Characteristics
g
20
10
0
−10
−20
−30
−40
−50
−60
−70
−80
60
50
40
30
20
10
−80
−40
0
40
80
120
160
TEMPERATURE : (°C)
Fig.5 Capacitance-temperature
characteristics
Rev.A
12/12
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号:
©2020 ICPDF网 联系我们和版权申明