MCR10EZPD1001 [ROHM]

Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1000ohm, 150V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 0805, CHIP;


型号：	MCR10EZPD1001
厂家：	ROHM
描述：	Fixed Resistor, Metal Glaze/thick Film, 0.1W, 1000ohm, 150V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 0805, CHIP 电阻器
文件：	总5页 (文件大小：64K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MCR10

Resistors

Compact Thick Film Chip Resistors

MCR10 (2012 size : 1 / 8W)

zFeatures

1) Power rating of 1 / 8W

2) Highly reliable chip resistor

Ruthenium oxide dielectric offers superior resistance to the elements.

3) Electrodes not corroded by soldering

Thick film makes the electrodes very strong.

4) Leading the world in development and mass production.

Since start of production in 1982 (first in the wold), this component has established a solid reputation as a

general–purpose chip resistor.

5) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.

zRatings

Design and specifications are subject to change without notice. Carefully check the specification sheet before using or

ordering it.

Item

Conditions

Specifications

0.125W (1 / 8W)

at 70°C

Rated power

Power must be derated according to the power derating curve

in Figure 1 when ambient temperature exceeds 70°C.

J, F

0.1W (1 / 10W)

100

at 70°C

−55

100

155

AMBIENT TEMPERATURE (°C)

Fig.1

Rated voltage

The voltage rating is calculated by the following equation.

If the value obtained exceeds the limiting element voltage,

the voltage rating is equal to the maximum operating voltage.

E: Rated voltage (V)

P: Rated power (W)

E= P×R

R: Nominal resistance (Ω)

Limiting element voltage 150V

Nominal resistance

See Table 1.

Operating temperature

−55°C to + 155°

Rev.G

1/4

MCR10

Resistors

Jumper type

Table 1

Resistance

Max. 50mΩ

Resistance range

Resistance temperature coefficient

Resistance tolerance

(Ω)

(ppm/°C)

Rated current

Operating temperature

−55°C to +155°C

10 to 91

(E24)

100

( 0.5%)

100 to 1M (E24)

100

F ( 1%)

( 5%)

10 to 2.2M (E24,96)

1.0 to 9.1

(E24)

400

200

10 to 10M (E24)

zBefore using components in circuits where they will be exposed to transients such as pulse loads (short–duration, high– level loads), be certain to evaluate the

component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that

is greater than its rated voltage.

Characteristics

Guaranteed value

Resistor type Jumper type

J : 5% Max. 50mΩ

Item

Test conditions (JIS C 5201-1)

JIS C 5201-1 4.5

F : 1%

Resistance

D : 0.5%

Variation of resistance

with temperature

JIS C 5201-1 4.8

Measurement : −55 / +25 / +125°C

See Table.1

JIS C 5201-1 4.13

Rated voltage (current) ×2.5, 2s.

Maximum overload voltage : 200V

Overload

(2.0%+0.1Ω)

Max. 50mΩ

A new uniform coating of minimum of

95% of the surface being immersed

and no soldering damage.

JIS C 5201-1 4.17

Rosin·Ethanol (25%WT)

Soldering condition : 235 5°C

Duration of immersion : 2.0 0.5s.

Solderability

(1.0%+0.05Ω)

No remarkable abnormality on the appearance.

Max. 50mΩ

JIS C 5201-1 4.18

Soldering condition : 260 5°C

Duration of immersion : 10 1s.

Resistance to

soldering heat

(1.0%+0.05Ω)

(3.0%+0.1Ω)

Max. 50mΩ

JIS C 5201-1 4.19

Test temp. : −55°C to +125°C 5cyc

Rapid change of

temperature

Max. 100mΩ

JIS C 5201-1 4.24

40°C, 93%RH

Test time : 1,000h to 1,048h

Damp heat, steady state

(3.0%+0.1Ω)

Max. 100mΩ

JIS C 5201-1 4.25.1

Rated voltage (current), 70°C

1.5h : ON − 0.5h : OFF

Test time : 1,000h to 1,048h

Endurance at 70°C

(3.0%+0.1Ω)

(1.0%+0.05Ω)

Max. 100mΩ

Max. 50mΩ

JIS C 5201-1 4.25.3

155°C

Endurance

Test time : 1,000h to 1,048h

JIS C 5201-1 4.29

23 5°C, Immersion cleaning, 5 0.5min.

Solvent : 2-propanol

Resistance to solvent

JIS C 5201-1 4.33

Bend strength of

the end face plating

Without mechanical damage such as breaks.

Rev.G

2/4

MCR10

Resistors

zDimensions (Unit : mm)

0.4 0.2

No.

Material

Resistive element

(Oxide metal thick film)

Silver thick film electrode

Nickel electrode

2.0 0.1

Sn electrode

Alumina substrate

Overcoating (Resin)

Packaging

Reel

Taping

φD0

Heat crimp cover tape

(Underside paper tape) Chip resistor Square punchout hole

Thick paper

mount

Label

EIAJ ET-7200B compliant

(Unit: mm)

+0.2

−0.1

+0.2

−0.1

8.0±0.3

3.5±0.05

1.75±0.1

1.65

2.4

−1.5

+1.0

φ180

φ60

φ13 0.2

+0.1

4.0±0.1

2.0±0.05

Max. 1.1

φ1.5

Rev.G

3/4

MCR10

Resistors

zPart No. Explanation

M C R 1 0 E Z P J

Resistance tolerance Nominal resistance

Part No.

0.5%

Resistance code, 3 or 4 digits.

000 denotes jumper type.

Resistance

tolerance

Resistance

code

J is also used

for jumper

F, D

4 digits

3 digits

Packaging Specifications Code

Resistance tolerance

J( 5%) F( 1%) D( 0.5%)

Part No.

Code

Packaging specifications

Paper tape (4mm Pitch)

Reel

Basic ordering unit (pcs)

5 000

MCR10

EZP

φ180mm (7in.)

Reel (

: Standard product

φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"

Rev.G

4/4

Appendix

Notes

No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM

CO.,LTD.

The content specified herein is subject to change for improvement without notice.

The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you

wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM

upon request.

Examples of application circuits, circuit constants and any other information contained herein illustrate the

standard usage and operations of the Products. The peripheral conditions must be taken into account when

designing circuits for mass production.

Great care was taken in ensuring the accuracy of the information specified in this document. However, should

you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no respon-

sibility for such damage.

The technical information specified herein is intended only to show the typical functions of and examples of

application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or

exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility

whatsoever for any dispute arising from the use of such technical information.

The Products specified in this document are intended to be used with general-use electronic equipment or

devices (such as audio visual equipment, office-automation equipment, communication devices, electronic

appliances and amusement devices).

The Products are not designed to be radiation tolerant.

While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or

malfunction for a variety of reasons.

Please be sure to implement in your equipment using the Products safety measures to guard against the

possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as

derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your

use of any Product outside of the prescribed scope or not in accordance with the instruction manual.

The Products are not designed or manufactured to be used with any equipment, device or system

which requires an extremely high level of reliability the failure or malfunction of which may result in a direct

threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,

aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no

responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended

to be used for any such special purpose, please contact a ROHM sales representative before purchasing.

If you intend to export or ship overseas any Product or technology specified herein that may be controlled under

the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact your nearest sales office.

THE AMERICAS / EUROPE / ASIA / JAPAN

ROHM Customer Support System

www.rohm.com

TEL : +81-75-311-2121

FAX : +81-75-315-0172

21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan

Appendix1-Rev3.0

MCR10EZPD1001 [ROHM]

相关型号：

MCR10EZPD1004

MCR10EZPD13R0

MCR10EZPD13R3

MCR10EZPD2050

MCR10EZPD22R6

MCR10EZPD2401

MCR10EZPD24R0

MCR10EZPD3001

MCR10EZPD30R1

MCR10EZPD6200

MCR10EZPDD

MCR10EZPDF