MG6403WZ [ROHM]
Application: Solar Inverter, UPS, Welding, IH, PFC For sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now.;
| 型号： | MG6403WZ |
| 厂家： | 
ROHM |
| 描述： | Application: Solar Inverter, UPS, Welding, IH, PFC For sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now. 功率因数校正 |
| 文件： | 总4页 (文件大小：240K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MG6403WZ
650V 80A Insulated Gate Bipolar Transistor
Datasheet
lOutline
Wafer
VCES
IC (Nominal)
650V
80A
VCE(sat) (Typ.)
1.5V
Max. Possible Chips per Wafer
444pcs
lFeatures
lInner Circuit
1) Trench Light Punch Through Type
(2)
(3)
(1) Gate
(2) Collector
(3) Emitter
2) Low Collector - Emitter Saturation Voltage
3) High Speed Switching & Low Switching Loss
4) Short Circuit Withstand Time 2μs
(1)
lApplication
Solar Inverter
UPS
Welding
IH
PFC
lAbsolute Maximum Ratings (at TC = 25°C unless otherwise specified)
Parameter
Collector - Emitter Voltage
Symbol
VCES
Value
650
Unit
V
V
VGES
Gate - Emitter Voltage
±30
*1
*1)
Collector Current
A
IC
*2
Pulsed Collector Current
320
A
ICP
Tj
Operating Junction Temperature
*1 Depending on thermal properties of assembly
*2 Pulse width limited by Tjmax.
-40 to +175
°C
www.rohm.com
© 2019 ROHM Co., Ltd. All rights reserved.
2019.08 - Rev.A
1/3
Datasheet
MG6403WZ
lDesign Assurance
Values
Typ.
Parameter
Symbol
Conditions
CC ≦ 360V,
Unit
μs
Min.
2
Max.
-
V
*3
VGE = 15V,
Short Circuit Withstand Time
-
tsc
Tj = 25℃
IC = 320A, VCC = 520V,
VP = 650V, VGE = 15V,
RG = 100Ω, Tj = 175℃
Reverse Bias Safe Operating
Area
RBSOA*3
FULL SQUARE
-
*3 Design assurance without measurement
lElectrical Characteristics (at Tj = 25°C unless otherwise specified, in case of TO-247N package)
Values
Parameter
Symbol
Conditions
Unit
V
Min.
650
Typ.
Max.
-
Collector - Emitter Breakdown
Voltage
BVCES IC = 10μA, VGE = 0V
ICES VCE = 650V, VGE = 0V
IGES VGE = ±30V, VCE = 0V
VGE(th) VCE = 5V, IC = 57.1mA
-
Collector Cut - off Current
-
-
-
-
10
±200
7.0
μA
nA
V
Gate - Emitter Leakage
Current
Gate - Emitter Threshold
Voltage
5.0
6.0
IC = 80A, VGE = 15V,
Collector - Emitter Saturation
Voltage
*3
Tj = 25°C
VCE(sat)
-
-
-
-
-
-
-
-
1.5
1.85
4810
184
79
1.9
V
Tj = 175°C
Cies VCE = 30V,
Coes VGE = 0V,
-
-
-
-
-
-
-
Input Capacitance
Output Capacitance
pF
nC
Cres
Qg
Reverse transfer Capacitance
Total Gate Charge
f = 1MHz
VCE = 400V,
171
33
Qge IC = 80A,
Qgc VGE = 15V
Gate - Emitter Charge
Gate - Collector Charge
59
*3 Design assurance without measurement
www.rohm.com
© 2019 ROHM Co., Ltd. All rights reserved.
2019.08 - Rev.A
2/3
Datasheet
MG6403WZ
lChip Information
320
②
②
①
300
Unit : μm
4700
5610
5700
335
455
: Pad Area
①
②
: Gate Bonding Pad
: Emitter Bonding Pad
Backside : Collector
0.09±0.03
Wafer Size
150mm
Wafer Thickness
Chip Size
0.07±0.01mm
5.70mm×5.70mm
0.09±0.03mm
AlSiCu:4.4μm
Cut Line Width
Top Side Metallization
Back Side Metallization Ti/Ni:0.4μm/Au:0.05μm
Passivation Polyimide
5.70
Unit：mm
lFurther Electrical Characteristics
Switching characteristics and thermal properties are depending strongly on module design
and mounting technology and can therefore not be specified for a bare die.
This chip data sheet refers to the device data sheet
RGTVX6TS65
www.rohm.com
© 2019 ROHM Co., Ltd. All rights reserved.
2019.08 - Rev.A
3/3
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products specified in this document are not designed to be radiation tolerant.
7) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, and power transmission systems.
8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
10) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
11) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
12) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102
S
相关型号：
MG6404WZ
Application: Solar Inverter, UPS, Welding, IH, PFC For sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now.
ROHM
MG6405WZ
Application: Solar Inverter, UPS, Welding, IH, PFC For sale of Bare Die, please contact the specifications in our sales office. Currently, we don't sell Bare Die on the internet distributors now.
ROHM
©2020 ICPDF网 联系我们和版权申明