MNR34J5ABJ153 [ROHM]
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 15000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP;
| 型号： | MNR34J5ABJ153 |
| 厂家： | 
ROHM |
| 描述： | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 15000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP 电阻器 |
| 文件： | 总5页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MNR34
Resistors
Chip resistor networks
MNR34 (3216×4 size)
!Features
1) Convex electrodes
Easy to check the fillet after soldering is finished.
2) Compatible with a wide range of mounting equipment.
Squared corners make it excellent for mounting using image recognition devices.
3) High-density mounting
Can be mounted even more densely than four 3216 chips (MCR18). Also, the number of parts and cost of mounting
have been reduced.
4) ROHM resistors have approved ISO-9001 certification.
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with
the product before using or ordering it.
!Ratings
Item
Conditions
Specifications
0.125W (1 / 8W)
Rated power
Power must be derated according to the power derating curve in
at 70°C
Figure 1 when ambient temperature exceeds 70°C.
100
80
60
40
20
0
−55
0
70
100 125
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E: Rated voltage (V)
P: Rated power (W)
E= P×R
200V
Limiting element voltage
R: Nominal resistance (Ω)
Nominal resistance
Operating temperature
See Table 1.
−55°C~+125°C
MNR34
Resistors
Jumper type
Table 1
Resistance range
Resistance temperature coefficient
(ppm / °
Max. 50mΩ
2A
Resistance
Resistance tolerance
J ( 5%)
(Ω)
C)
Rated current
10≤R≤1M (E24)
200
Operating temperature
−55°C~+125°C
•Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
!Characteristics
Guaranteed value
Item
Resistance
Test conditions (JIS C 5201-1)
JIS C 5201-1 4.5
Resistor type
J : 5%
Jumper type
Max. 50mΩ
Variation of resistance
with temperature
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
See Table.1
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Limiting Element Voltage×2 : 400V
Overload
(2.0%+0.1Ω)
Max. 50mΩ
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235 5°C
Duration of immersion : 2.0 0.5s.
Solderability
(1.0%+0.05Ω)
No remarkable abnormality on the appearance.
Max. 50mΩ
JIS C 5201-1 4.18
Soldering condition : 260 5°C
Duration of immersion : 10 1s.
Resistance to
soldering heat
(1.0%+0.05Ω)
(3.0%+0.1Ω)
Max. 50mΩ
Max. 50mΩ
JIS C 5201-1 4.19
Test temp. : −55°C~+125°C 5cyc
Rapid change of
temperature
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h~1,048h
Damp heat, steady state
(3.0%+0.1Ω)
Max. 50mΩ
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h~1,048h
Endurance at 70°C
(3.0%+0.1Ω)
(1.0%+0.05Ω)
(1.0%+0.05Ω)
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
JIS C 5201-1 4.25.3
125°C
Endurance
Test time : 1,000h~1,048h
JIS C 5201-1 4.29
23 5°C, Immersion cleaning, 5 0.5min.
Solvent : 2-propanol
Resistance to solvent
JIS C 5201-1 4.33
Bend strength of
the end face plating
Without mechanical damage such as breaks.
MNR34
Resistors
!External dimensions (Units : mm)
5.2 0.4
6
1
Cross section A-A'
∗
No.
1
Material
1.27
B
Thick dielectric glaze of ruthenium
(only silver used for jumper)
5
6
1
Cross section B-B'
5
2
3
4
5
6
Thick film of silver for primary electrode
Nickel-coated secondary electrode
External electrode coated with Sn/Pb or Sn
Alumina substrate
A
A'
A 1 0 3
0.55 0.1
B'
0.5 0.2
2
3
4
Overcoating
1.0 0.2
0.8 0.2
Pitch of the upper electrode.
∗
!Equivalent circuit
R1
R2
R3
R4
R1=R2=R3=R4
!Packaging
Reel
Taping
P
0
P2
0
D
φ
A
B
D
K
A
0
P1
C
(Units: mm)
Label
W
F
E
1.75 0.1
A
0
B0
EIAJ ET-7200A compliant
12.0 0.3
5.5 0.05
3.4 0.1
5.6 0.1
K
D0
P
0
P1
P2
(Units: mm)
D
+0.1
0
4.0 0.1
2.0 0.05
1.0 0.1
4.0 0.1
φ1.5
A
B
C
+1
0
0
−3
φ60
φ180
13 0.3
φ13 0.2
MNR34
Resistors
!Product designation
Part No.
Packaging / Processing specifications
Circuit
configuration
code
Resistance
tolerance
Nominal
resistance
Packaging
Taping
Package style
Embossed reel
3-digit IEC coding system
Code Part No.
J5 MNR34
AB MNR04/12/14/32/34
J
5%
!Electrical characteristics
400
300
200
100
0
6.0
6.0
4.0
JIS C 5201-1 4.13
JIS C 5201-1 4.8
SAMPLE SIZE : n=20pcs
25°C / −55°C 25°C / 125°C
JIS C 5201-1 4.5
SAMPLE SIZE : n=20pcs
RATED VOLTAGE × 2.5TIMES 2s
LIMITING ELEMENT
SAMPLE SIZE : n=40pcs
20°C 65%RH
4.0
VOLTAGE×2 : 400V
2.0
0
2.0
0
−100
−200
−300
−2.0
−4.0
−6.0
−2.0
−4.0
−6.0
−400
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
RESISTANCE (Ω)
RESISTANCE (Ω)
RESISTANCE (Ω)
Fig.2 Resistance
Fig.4 Overload
Fig.3 Variation resistance with
temperature
3.0
2.0
3.0
2.0
6.0
4.0
2.0
JIS C 5201-1 4.18
SAMPLE SIZE : n=20pcs
SOLDERING CONDITION
JIS C 5201-1 4.19
SAMPLE SIZE : n=20pcs
−55°C / 125°C 5cyc
JIS C 5201-1 4.24
SAMPLE SIZE : n=20pcs
40°C 93%RH WITH NO LOAD
1,000h
: 260°C 10s
1.0
1.0
0
0
0
−1.0
−2.0
−3.0
−2.0
−1.0
−2.0
−3.0
−4.0
−6.0
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
RESISTANCE (Ω)
RESISTANCE (Ω)
RESISTANCE (Ω)
Fig.6 Rapid change of
temperature
Fig.5 Resistance to soldering heat
Fig.7 Damp heat, steady state
MNR34
Resistors
2.0
1.5
6.0
4.0
6.0
4.0
JIS C 5201-1 4.25.1
SAMPLE SIZE : n=20pcs
70°C 1,000h
OVERLOAD : THE RATED
VOLTAGE
JIS C 5201-1 4.29
SAMPLE SIZE : n=20pcs
IPA, 5min.
JIS C 5201-1 4.25.3
SAMPLE SIZE : n=20pcs
125°C WITH NO LOAD 1,000h
1.0
2.0
2.0
0.5
0
0
0
−0.5
−1.0
−1.5
−2.0
−2.0
−4.0
−6.0
−2.0
−4.0
−6.0
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
10
100
1k
10k 100k
1M
RESISTANCE (Ω)
RESISTANCE (Ω)
RESISTANCE (Ω)
Fig.9 Endurance
Fig.8 Endurance at 70°C
Fig.10 Resistance to solvents
相关型号：
MNR34J5ABJ202
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 2000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ222
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 2200ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ223
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 22000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ240
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 24ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ270
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 27ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ271
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 270ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ272
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 2700ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ273
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 27000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ274
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 270000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
MNR34J5ABJ2R2
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 2.2ohm, 200V, 5% +/-Tol, 500ppm/Cel, Surface Mount, 0201, CHIP
ROHM
MNR34J5ABJ300
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 30ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1220, CHIP
ROHM
©2020 ICPDF网 联系我们和版权申明