NF3002-WA30A [ROHM]

High speed thermal printhead (with thermal historical control); 高速热敏打印头(带热历史对照)
NF3002-WA30A
元器件型号: NF3002-WA30A
生产厂家: ROHM    ROHM
描述和应用:

High speed thermal printhead (with thermal historical control)
高速热敏打印头(带热历史对照)

PDF文件: 总4页 (文件大小:69K)
下载文档:  下载PDF数据表文档文件
MAX34334CSE前5页PDF页面详情预览
NF3002-WA30A
Printheads
Under development
High speed thermal printhead
(with thermal historical control)
NF3002-WA30A
NF-WA30 series are the thermal printheads developed for high-speed / high-resolution printing for the market of bar-code
printer & scale-printer, based on “step-free” structure.
These printheads realize ultra-highspeed printing with long life & high reliability.
Applications
Bar code printer
Label printer
Packaging printer
ATM
Ticket printer
Features
1) High dot reproducibility with step-free structure.
2) High-hardness protect cote type “W-coat” is employed with 150km abrasion life-time.
3) Even without history-control, high-speed printing more than 300mm / s can be achieved at 300dpi with clear print
image. With history-control, 500mm / s printing is also possible at 300dpi.
External dimensions
(Unit : mm)
7.104±0.3
DOT No.640
66±0.5
54.208
DOT No.1
6±0.5
40±0.3
20±0.3
(13)
(5.896)
34.0±0.5
MAX.51
Ma
x.
φ
2
φ
3 H10 Length 4
φ
3 H10
Effective Depth 3
MAX.4.5
MAX.11
7.3±0.3
M3
Effective Depth 3
#2
#20
#4
#1
CONNECTOR A
#1
#19
CONNECTOR B
TYPE OF PRINTHEAD
17.8±0.2
(3.5)
0
0369UB
1/3
NF3002-WA30A
Printheads
Equivalent circuit
V
H
(COM)
220µF
35V
Under development
DOT
#640
DOT
#1
GND
0.1µF
50V
V
DD
(+5)
/ STB2
/ STB1
BEO
/ RESET
LATCH REGISTER
CLK (CP)
DI
/ LOAD
START
INC
TO EACH IC
SEL2
SEL1
TM
TM
THERMISTOR
30kΩ B: 3950
DI, STB DIVISION DOT No. CORRESPONDENCE
DI No.
DI
DOT No.
640 to 1
/ STB No.
/ STB2
/ STB1
DOT No.
640 to 385
384 to
1
Pin assignments
CONNECTOR A
No.
1
3
5
7
9
11
13
15
17
19
Circuit
No.
Circuit
CONNECTOR B
No.
1
3
Circuit
V
H
(COM)
No.
2
4
Circuit
V
H
(COM)
V
DD
GND
GND
/LOAD
INC
SEL2
/RESET
/ STB 1
TM
SENS2
2
4
6
8
10
12
14
16
18
20
BEO
DI
CLK(CP)
START
N.C.
SEL1
/ STB 2
TM
SENS1
SENS3
GND
GND
2/3
NF3002-WA30A
Printheads
Characteristics
Parameter
Effective printing width
Dot pitch
Total dot number
Average resistance value
Applied voltage
Applied power
Print cycle
Maximum number of dots energized simultaneously
Maximum clock frequency
Maximum roller diameter
Running life / pulse life
Operating temperature
Symbol
Rave
V
H
P
O
SLT
Typical
54.2
0.0847
640
850
24
0.59
0.28
640
8
φ20
150/(1×10
8
)
5 to 45
Unit
mm
mm
dots
V
W/dot
ms
dots
MHz
mm
km/pulses
°C
Under development
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关元器件产品Datasheet PDF文档

NF3004-RE10A

For Color Photo Printers (300DPI ; dots / inch)
暂无信息
5 ROHM

NF3004-RE10A

For Color Photo Printers (300DPI ; dots / inch)
暂无信息
33 ROHM

NF3004-VA20A

Hight Speed Thermal Printhead (300DPI ; dots / inch)
暂无信息
15 ROHM

NF3004-VA30A

High speed thermal printhead (300 dots / inch)
暂无信息
12 ROHM

NF3004-VA30A

High speed thermal printhead (300 dots / inch)
暂无信息
4 ROHM

NF3004-VC20A

Suitable for Small Photo printers which can Make Direct Print out from digital still cameras
暂无信息
35 ROHM
    NF3002-WA30A
    描述和应用

    High speed thermal printhead (with thermal historical control)
    高速热敏打印头(带热历史对照)

    总4页 (69K) ROHM
    ROHM
    第一页预览: