PMR01ZZPJU [ROHM]
罗姆的电流检测用超低贴片电阻是针对大电流电路的金属板型超低阻值贴片电阻。采用了独特的切断构造,可以提高电流检测精度,适合大电流高速开关电路。;型号: | PMR01ZZPJU |
厂家: | ROHM |
描述: | 罗姆的电流检测用超低贴片电阻是针对大电流电路的金属板型超低阻值贴片电阻。采用了独特的切断构造,可以提高电流检测精度,适合大电流高速开关电路。 开关 |
文件: | 总10页 (文件大小:905K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Metal plate shunt resistors <ultra low ohmic>
PMR series
Datasheet
●Features
1) Ultra low-ohmic resistance range (1mΩ ~ )
2) Improved current detection accuracy by trimming-less structure.
3) Special low resistance temperature coefficient.
4) The unique chip structure minimizes thermal stress during
temperature cycling, resulting in greater reliability.
5) ROHM resistors have obtained ISO9001 / IATF16949 certification.
6) Corresponds to AEC-Q200
.
●Products list
ambient
terminal
Resistance Temperature
Resistance
range
Operating
Automotive
Type code
Rated power
(W)
Part No.
Temperature Temperature
tolerance
(%)
coefficient
(ppm / °C)
temperature range Grade Available
(°C)
70
(°C)
-
(mΩ)
(°C)
(AEC-Q200)
Yes
(mm)
(inch)
0402
PMR01
PMR03
1005
0.2
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
0~+200
0~+150
10
10
-55 ~ +155
1608
0603
0.25
70
-
-
130
-
-55 ~ +155
-65 ~ +155
-55 ~ +155
-65 ~ +155
-55 ~ +155
-65 ~ +175
-65 ~ +175
-65 ~ +175
-55 ~ +155
-65 ~ +175
-55 ~ +155
Yes
1
0.5
1.5
1
±100
±150
±100
±100
±75
2
PMR10
PMR18
PMR25
PMR50
PMR100
2012
3216
3225
5025
6432
0805
Yes
70
-
3,4,5,6,7,8,9,10
130
-
1,2
1206
1210
2010
2512
Yes
Yes
Yes
Yes
70
-
3,4,5,6,7,8,9,10
2
130
-
1
2,3,4,5
1
70
-
±100
±75
2
130
-
1,2
1
70
-
±100
3,4,5,6,7,8,9,10
1,2
±75
3
130
-
±150
F(±1%)
J(±5%)
2
70
±100
3,4,5,6,7,8,9,10
∗ Design and specifications are subject to change without notice.
Carefully check the specification sheet supplied with the product before using or ordering it.
●Part Number Description
PMR
25
HZP
J
V
2L0
Special part
code
Resistance
tolerance
Part No.
Size (mm)[inch]
Packaging specifications code
Nominal resistance
01 (1005)[0402]
03 (1608)[0603]
10 (2012)[0805]
18 (3216)[1206]
25 (3225)[1210]
50 (5025)[2010]
100 (6432)[2512]
Packaging
specifications
Embossed tape
(2mmpitch)
Quantity
/ Reel
Resistance code,
3 or 4 digits.
F (±1%)
J (±5%)
V : 1m~4mΩ
U : 5m~10mΩ
PMR
Part No.
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
Code
ZZP
EZP
EZP
EZP
HZP
HZP
HZP
(Metal plate shunt
resistors / ultra low
ohmic)
Resistance tolerance
Resistance
value
1mΩ
10,000
F
J
Paper tape
(4mmpitch)
1L00
2L00
3L00
4L00
5L00
6L00
7L00
8L00
9L00
10L0
1L0
2L0
3L0
4L0
5L0
6L0
7L0
8L0
9L0
10L
5,000
5,000
5,000
2,000
2,000
2,000
2mΩ
Paper tape
(4mmpitch)
3mΩ
4mΩ
Paper tape
(4mmpitch)
Embossed tape
(4mmpitch)
5mΩ
6mΩ
7mΩ
8mΩ
Embossed tape
(4mmpitch)
9mΩ
10mΩ
Embossed tape
(4mmpitch)
www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
1/7
2023.1 - Rev.013
PMR series
Datasheet
●Chip resistor dimensions and markings
■PMR 01 / 03 / 10 / 18
■PMR 25 / 50 / 100
<Marking method>
There are four digits used for the calculation
number "L" is used for the decimal point of mΩ.
Ex.) 2mΩ = 2L00
10mΩ = 10L0
*PMR01/03 are NO marking.
(Unit : mm)
Resistance range
Marking
existence
Part No. (mm) (inch)
L
W
t
a
b
c
(mΩ)
10
PMR01
PMR03
1005
1608
0402
0603
1.00±0.05
1.60±0.15
0.50±0.05
0.80±0.15
0.25±0.10
0.25±0.10
―
―
0.25±0.10
0.35±0.15
0.55±0.25
0.75±0.25
0.60±0.25
0.45±0.25
0.55±0.25
0.45±0.25
0.35±0.25
0.40±0.25
0.35±0.25
1.20±0.25
0.85±0.25
1.15±0.25
0.90±0.25
0.70±0.25
0.50±0.25
0.75±0.25
0.60±0.25
0.70±0.25
0.60±0.25
0.90±0.20
1.00±0.20
0.80±0.20
0.90±0.20
0.90±0.20
1.85±0.20
1.30±0.20
1.40±0.20
1.40±0.20
1.05±0.20
1.40±0.20
1.10±0.20
0.90±0.20
1.10±0.20
0.90±0.20
2.30±0.25
1.60±0.25
1.80±0.25
1.80±0.25
1.30±0.25
1.70±0.25
1.40±0.25
1.10±0.25
1.35±0.25
1.10±0.25
―
―
No
No
10
2
3
0.42±0.15
0.32±0.15
4
5
PMR10
2012
0805
2.00±0.15
1.20±0.15
―
―
Yes
6
7
8
9
0.28±0.15
0.44±0.15
10
1
2
3
0.42±0.15
4
5
PMR18
PMR25
PMR50
3216
3225
5025
1206
1210
2010
3.20±0.15
3.20±0.20
5.00±0.20
1.60±0.15
2.50±0.20
2.50±0.20
―
―
Yes
Yes
Yes
6
7
0.32±0.15
0.28±0.15
8
9
10
1
0.52±0.15
0.42±0.15
0.32±0.15
2
0.50±0.20
1.95±0.20
3
4
5
1
0.52±0.15
0.42±0.15
0.52±0.15
2
3
4
0.42±0.15
5
0.50±0.20
1.95±0.20
6
7
0.32±0.15
8
9
10
1
0.52±0.15
0.42±0.15
0.52±0.15
2
3
4
0.42±0.15
5
PMR100
6432
2512
6.40±0.25
3.20±0.25
0.50±0.25
2.65±0.25
Yes
6
7
0.32±0.15
8
9
10
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
2/7
2023.1 - Rev.013
PMR series
Datasheet
●Land pattern example
(Unit : mm)
Dimensions
Part No.
A
B
C
D
0.65
1.0
1.3
1.7
1.5
2.1
2.8
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
0.5
0.5
0.8
0.6
1.0
1.8
1.2
1.8
2.5
3.4
4.0
4.0
6.0
6.8
0.5
0.9
1.3
1.8
2.8
2.8
3.4
www.rohm.com
3/7
© 2023 ROHM Co., Ltd. All rights reserved.
2023.1 - Rev.013
PMR series
Datasheet
●Derating curve
When the ambient temperature exceeds 70°C, or terminal temperature in excess 130°C power dissipation must
be adjusted according to the derating curve below.
<Ambient temperature>
■PMR01 / 03
■PMR10 (3, 4, 5, 6, 7, 8, 9, 10mΩ)
■PMR18 (3, 4, 5, 6, 7, 8, 9, 10mΩ)
■PMR25 (2, 3, 4, 5mΩ)
■PMR50 (3, 4, 5mΩ)
■PMR100 (3, 4, 5, 6, 7, 8, 9, 10mΩ)
<Terminal temperature>
■PMR10 (2mΩ)
■PMR18 (1, 2mΩ)
■PMR25 (1mΩ)
■PMR50 (1, 2mΩ)
■PMR100 (1, 2mΩ)
www.rohm.com
4/7
© 2023 ROHM Co., Ltd. All rights reserved.
2023.1 - Rev.013
PMR series
Datasheet
●Characteristic
Test items
Resistance
Guaranteed value
See P.1
Test conditions
20°C
Measuring method : Measuring under
termination by4 probes.
Bottom termination
Probe
Variation of resistance
with temperature
See P.1
Test condition:See following table 1
Overload
±2.0%
Rated power×2.5, 2s
Rosin-ethanol solution(25% mass)
Soldering condition:245±5°C
Duration of immersion:2.0±0.5s
Soldering condition:260±5°C
Solderability
Anew uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
±1.0%
Resistance to soldering
heat
No remarkable abnormalityon the appearance. Duration of immersion:10±1s
Rapid change of
temperature
±1.0%
±3.0%
±3.0%
Test condition:See table 2
Temperature humidity
storage
85°C,85%(Relative humidity)
Test time:1,000h
Endurance
(70°C, Terminal
temperature)
Test condition:See table 3
Endurance
(Ambient temperature)
±3.0%
±0.5%
Test condition:See table 4
Resistance to solvent
23±5°C, Immersion cleaning, 5±0.5min
Solvent: 2-propanol
Bend strength of the end
face plating
Without open.
Endurance with 90mm width
Deflection:3mm
IEC 60115-1 / IEC 60115-8
JIS C 5201-1 / JIS C 5201-8
Table 1 : Test condition of variation of
resistance with temperature
Table 2 : Test condition of Rapid change of
temperature
Resistance range
Resistance range
Test condition
(°C)
Part No.
Test condition
Part No.
(mΩ)
(mΩ)
PMR01
PMR03
10
PMR01
PMR03
10
-55°C~+125°C 1,000cycles
+25/-55, +25/+125
10
10
2
-55°C~+155°C 1,000cycles
-55°C~+125°C 1,000cycles
-55°C~+155°C 1,000cycles
-55°C~+125°C 1,000cycles
-55°C~+155°C 1,000cycles
-55°C~+125°C 1,000cycles
-55°C~+155°C 1,000cycles
-55°C~+125°C 1,000cycles
-55°C~+155°C 1,000cycles
-55°C~+125°C 1,000cycles
2
+25/-65, +25/+155
+25/-55, +25/+125
+25/-65, +25/+155
+25/-55, +25/+125
+25/-65, +25/+175
+25/-55, +25/+125
+25/-65, +25/+175
+25/-55, +25/+125
+25/-65, +25/+155
+25/-55, +25/+125
PMR10
PMR18
PMR25
PMR50
PMR100
PMR10
PMR18
PMR25
PMR50
PMR100
3,4,5,6,7,8,9,10
3,4,5,6,7,8,9,10
1,2
1,2
3,4,5,6,7,8,9,10
3,4,5,6,7,8,9,10
1
2,3,4,5
1
2,3,4,5
1,2
1,2
3,4,5,6,7,8,9,10
1,2
3,4,5,6,7,8,9,10
1,2
3,4,5,6,7,8,9,10
3,4,5,6,7,8,9,10
www.rohm.com
5/7
© 2023 ROHM Co., Ltd. All rights reserved.
2023.1 - Rev.013
PMR series
Datasheet
Table 3 : Test condition of variation of endurance
(Ambient temperature 70°C, Terminal temperature)
Table 4 : Test condition of endurance
(ambient temperature)
Resistance range
Resistance range
Part No.
Test condition
Part No.
Test condition
(mΩ)
(mΩ)
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
ꢀꢀTerminal temperature : 130°C
ꢀꢀRated pow er 1.5h ON-0.5h OFF
ꢀꢀTest time : 1,000h
PMR01
PMR03
10
PMR01
PMR03
10
10
155°C
Test time : 1,000h
10
2
PMR10
PMR18
2,3,4,5,6,7,8,9,10
PMR10
PMR18
1,2,3,4,5,6,7,8,9,10
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
ꢀꢀTerminal temperature : 130°C
ꢀꢀRated pow er 1.5h ON-0.5h OFF
ꢀꢀTest time : 1,000h
175°C
Test time : 1,000h
155°C
Test time : 1,000h
175°C
Test time : 1,000h
155°C
Test time : 1,000h
175°C
Test time : 1,000h
155°C
3,4,5,6,7,8,9,10
1,3
2,4,5
PMR25
PMR50
PMR100
1,2
1,2,3
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
ꢀꢀTerminal temperature : 130°C
ꢀꢀRated pow er 1.5h ON-0.5h OFF
ꢀꢀTest time : 1,000h
3,4,5,6,7,8,9,10
1
3,4,5,6,7,8,9,10
1,2
3,4,5,6,7,8,9,10
Test time : 1,000h
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀTerminal temperature : 115°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
PMR25
3
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
ꢀꢀTerminal temperature : 130°C
ꢀꢀRated pow er 1.5h ON-0.5h OFF
ꢀꢀTest time : 1,000h
2,4,5
1,2
PMR50
ꢀꢀꢀAmbient temperature : 70°C
3,4,5,6,7,8,9,10
1,2
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
ꢀꢀTerminal temperature : 130°C
ꢀꢀRated pow er 1.5h ON-0.5h OFF
ꢀꢀTest time : 1,000h
PMR100
ꢀꢀꢀAmbient temperature : 70°C
ꢀꢀꢀRated pow er 1.5h ON, 0.5h OFF
ꢀꢀꢀTest time : 1,000h
3,4,5,6,7,8,9,10
www.rohm.com
6/7
© 2023 ROHM Co., Ltd. All rights reserved.
2023.1 - Rev.013
PMR series
Datasheet
●Tape dimensions
■Paper tape
(Unit : mm)
B0
Part No.
W
F
E
A0
PMR03
8.0±0.3
3.5±0.05 1.75±0.1
3.5±0.05 1.75±0.1
3.5±0.05 1.75±0.1
0.95±0.1
1.75±0.1
2.3+0.2
-0.1
3.5+0.15
-0.05
1.45+0.2
-0.1
1.95+0.1
-0.05
PMR10
PMR18
8.0±0.3
8.0±0.3
Part No.
D0
P0
P1
P2
T2
Φ1.5+0.1
PMR03
4.0±0.1
4.0±0.1
2.0±0.05
MAX1.1
0
Φ1.5+0.1
PMR10
PMR18
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.05
MAX1.1
MAX1.1
0
Φ1.5+0.1
0
■Embossed tape
(Unit : mm)
Part No.
W
F
E
A0
B0
PMR01
8.0±0.1
3.5±0.05 1.75±0.1 0.68±0.03 1.12±0.03
PMR25
PMR50
PMR100
8.0±0.3
3.5±0.05 1.75±0.1
3.0±0.1
2.9±0.2
3.5±0.2
3.5±0.1
5.3±0.2
6.7±0.2
12.0±0.3 5.5±0.05 1.75±0.1
12.0±0.3 5.5±0.05 1.75±0.1
Part No.
D0
P0
P1
P2
T2
Φ1.5+0.1
PMR01
4.0±0.05 2.0±0.05
2.0±0.05
MAX1.1
0
Φ1.5+0.1
PMR25
PMR50
PMR100
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.05
2.0±0.05
2.0±0.05
MAX1.1
MAX1.1
MAX1.1
0
Φ1.5+0.1
0
Φ1.5+0.1
0
●Reel dimensions
Using two kinds of reels for taping.
(Unit : mm)
Part No.
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
A
B
C
D
9 +1.0
0
Φ180 0
Φ60 +1.0
Φ13±0.2
-1.5
0
13 +1.0
0
www.rohm.com
7/7
© 2023 ROHM Co., Ltd. All rights reserved.
2023.1 - Rev.013
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.
However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble
cleaning agents for cleaning residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
Rev.004
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明