PMR10EZPF3L00 [ROHM]
Fixed Resistor, 0.5W, 0.003ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE;型号: | PMR10EZPF3L00 |
厂家: | ROHM |
描述: | Fixed Resistor, 0.5W, 0.003ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE |
文件: | 总3页 (文件大小:88K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PMR10
Resistors
Ultra-Low Ohmic Resistors for Current Detection
PMR10
zFeatures
1) Ultra low-ohmic resistance range (2mΩ~)
2) Lowest height (≤0.5mm)
3) Improved current detection accuracy by trimming-less structure.
Highly recommended for large current / High speed switching circuit.
4) Completely Pb free product
5) ISO9001- / ISO/TS 16949-approved
zQuick reference
The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specifications.
Temperature
coefficient
(ppm / °C)
Operating
temperature range
(°C)
Resistance
tolerance
Rated power
Resistance value
Part No.
Size code
(mΩ)
(70°C)
F ( 1%)
G ( 2%)
J ( 5%)
2, 3, 4, 5, 6,
7, 8, 9, 10
PMR10
2012 (0805)
1/2W
150
−
55 to
+
155
zDimensions(Unit : mm)
L
Part No.
PMR10
∗ : Each value range varies with the resistance.
Size code
L
W
t
b
∗
∗
2012 (0805) 2.0 0.15
1.2 0.15
0.42 to 0.28 0.15
0.6 to 0.2 0.15
W
t
2L00
b
b
Rev.A
1/2
PMR10
Resistors
zPart No. Explanation
P M R 1 0 E Z P
J
V
Part No.
Resistance tolerance
Special part number
Nominal resistance
±
±
±
1%
2%
5%
U
F
G
J
5 to 10mΩ
1 to 4mΩ
Resistance code, 3 or 4 digits.
V
Resistance
tolerance
Resistance
code
F
G
J
:
:
:
4 digits
4 digits
3 digits
Resistance Tolerance
Resistance
Value (Ω)
J
F
2mΩ
3mΩ
4mΩ
5mΩ
6mΩ
7mΩ
8mΩ
9mΩ
10mΩ
2L0
3L0
4L0
5L0
6L0
7L0
8L0
9L0
10L
2L00
3L00
4L00
5L00
6L00
7L00
8L00
9L00
10L0
Packaging Specifications Code
Resistance tolerance
Part No.
Code
EZP
Packaging specifications
Paper tape (4mm Pitch)
Reel
Basic ordering unit (pcs)
J( 5%) F( 1%)
±
±
,
φ
PMR10
180mm (7in.)
5 000
Reel (φ180) : Compatible with JEITA standard "EIAJ ET-7200B"
: Standard product
zPackaging
Reel
Taping
P
0
P
2
P1
D0
E
F
W
B
0
A
B
D
A
0
Top tape
Base paper
Components
Cavity
C
(Unit : mm)
Label
W
F
3.5 0.05
E
A
0
B
0
EIAJ ET-7200B compliant
+0.2
-0.1
+0.2
-0.1
8.0 0.3
1.75 0.1 1.65
2.4
(Unit : mm)
D
A
B
C
D0
P0
P1
P
2
K
0
−1.5
+1
0
+1.0
0
+0.1
0
φ180
φ13 0.2
4.0 0.1
4.0 0.1
2.0 0.05
Max. 1.1
φ60
9
φ1.5
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
THE AMERICAS / EUROPE / ASIA / JAPAN
ROHM Customer Support System
Contact us : webmaster@ rohm.co.jp
www.rohm.com
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Copyright © 2008 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
Appendix1-Rev2.0
相关型号:
PMR10EZPF4L00
Fixed Resistor, 0.5W, 0.004ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE
ROHM
PMR10EZPF8L00
Fixed Resistor, 0.5W, 0.008ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0805, CHIP, LEAD FREE
ROHM
PMR10EZPFU10L0
Fixed Resistor, Metal Alloy, 0.5W, 0.01ohm, 1% +/-Tol, 150ppm/Cel, Surface Mount, 0805, CHIP
ROHM
©2020 ICPDF网 联系我们和版权申明