PTZTE253.6B [ROHM]
Zener Diode, 3.8V V(Z), 5.26%, 1W, Silicon, Unidirectional,;
| 型号： | PTZTE253.6B |
| 厂家： | 
ROHM |
| 描述： | Zener Diode, 3.8V V(Z), 5.26%, 1W, Silicon, Unidirectional, 测试 光电二极管 |
| 文件： | 总9页 (文件大小：2310K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PTZ3.6B
Zener Diode
Data sheet
ꢀ ꢀ ꢀ
●Outline
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀꢀꢀ
ꢀ ꢀ ꢀ
P
1000
mW
D
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ ꢀ ꢀ
●Feature
●Inner Circuit
High reliability
Small power mold type
●Application
●Packaginpecification
P
Embossed Tape
Voltage regulation
ReSize(mm)
180
12
1500
TE25
3.6B
Taing Width(mm)
Basic Ordering Unit(pcs)
TapingCode
●Structure
Silicon Epitaxial Planar
Marking
(T = 25℃)
●Absolute Maximum Rating
a
Parameter
Symbol
Limits
1000
150
Unit
mW
℃
Power dissipation
P
T
T
stg
Junctiontemperature
Storagetemperatur
-55 ～ 150ꢀ
℃
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
ꢀ
ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ
1/6
ꢀ
2017/01/11_Rev.003
PTZ Series
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Data sheet
●Characteristic (T = 25ºC)
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀ
a
Symbol
Zener Voltage:V (V)
Dynamic Impedance:Z (Ω) Reverse Current:I (μA)
Z
R
Z
P/N
I (mA)
I (mA)
V (V)
0.5
0.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1
1
3.0
3.5
4.0
5.0
MIN.
2.000
2.200
2.400
2.700
3.000
3.300
3.600
3.900
4.300
4.700
5.100
5.600
6.200
6.800
7.500
8.200
9.100
10.000
11.000
12.000
13.300
14.700
16.200
18.000
20.000
22.000
24.000
27.000
30.000
33.000
36.000
MAX.
2.240
2.450
2.700
3.100
3.400
3.700
4.000
4.400
4.800
5.200
5.700
6.300
7.000
7.700
8.400
9.300
10.200
11.200
12.300
13.500
15.000
16.500
18.300
20.300
22.400
24.500
27.600
30.800
34.000
37.000
0.00
MAX.
25
20
15
15
15
15
15
15
15
10
8
8
6
6
4
4
6
6
8
MAX.
200
200
200
200
100
80
60
40
20
20
20
20
20
20
20
10
10
10
10
10
0
10
10
10
10
10
10
10
z
z
R
PTZ 2.0B
PTZ 2.2B
PTZ 2.4B
PTZ 2.7B
PTZ 3.0B
PTZ 3.3B
PTZ 3.6B
PTZ 3.9B
PTZ 4.3B
PTZ 4.7B
PTZ 5.1B
PTZ 5.6B
PTZ 6.2B
PTZ 6.8B
PTZ 7.5B
PTZ 8.2B
PTZ 9.1B
PTZ 10B
PTZ 11B
PTZ 12B
PTZ 13B
PTZ 15B
PTZ 16B
PTZ 18B
PTZ 20B
PTZ 22B
PTZ 24B
PTZ 27B
PTZ 30B
PTZ 33B
PTZ 36B
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
0
0
10
10
10
10
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
1
10
10
10
10
6.0
7.0
.0
.0
8
10
1
12
2
14
14
16
16
18
20
100
1.0
2.0
13.0
15.0
17.0
19.0
21.0
23.0
25.0
27.0
10
V test time is 40ms.
Z
●Marking
ꢀ
P/N
rking
2.0B
2.2B
2.4B
2.7B
3.0B
3.3B
3.6B
3.9B
4.3B
4.7B
5.1B
5.6B
6.2B
6.8B
7.5B
8.2B
P/N
Marking
PTZ .0B
TZ 2.2B
TZ 2.4B
PTZ 2.7B
PTZ 3.0B
PTZ 3.3B
PTZ 3.6B
PTZ 3.9B
PTZ 4.3B
PTZ 4.7B
PTZ 5.1B
PTZ 5.6B
PTZ 6.2B
PTZ 6.8B
PTZ 7.5B
PTZ 8.2B
PTZ 9.1B
PTZ 10B
PTZ 11B
PTZ 12B
PTZ 13B
PTZ 15B
PTZ 16B
PTZ 18B
PTZ 20B
PTZ 22B
PTZ 24B
PTZ 27B
PTZ 30B
PTZ 33B
PTZ 36B
ꢀ
9.1B
10B
11B
12B
13B
15B
16B
18B
20B
22B
24B
27B
30B
33B
36B
ꢀ
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
ꢀ
ꢀ ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ
2/6
2017/01/11_Rev.003
PTZ Series
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Data sheet
●Characteristic Curves
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
ꢀ
ꢀ ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ
3/6
2017/01/11_Rev.003
PTZ3.6B
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Data sheet
●Characteristic Curves
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
4/6
2017/01/11_Rev.003
PTZ3.6B
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Data sheet
●Characteristic Curves
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
ꢀ
ꢀ ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ
5/6
2017/01/11_Rev.003
PTZ3.6B
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Data sheet
(PMDS DO-214AC )
●Dimension
●Taping (Unit:mm)
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
©2017 ROHMCo., Ltd.All rights reserved.
6/6
2017/01/11_Rev.003
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or able for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products or Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality contsystem. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implemenyour own responsibilities, adequate
safety measures including but not limited to fail-safe design against the pical ury, damage to any property, which
a failure or malfunction of our Products may cause. The following are exaof safety measures:
[a] Installation of protection circuits or other protective devices to imsystem safety
[b] Installation of redundant circuits to reduce the impact of singr multiple circuit faiure
3. Our Products are designed and manufactured for use under stdard conditions d not under any special or
extraordinary environments or conditions, as exemplifielow. Accordingly, OHM shall not be in any way
responsible or liable for any damages, expenses or losses isig from the usof aROHM’s Products under any
special or extraordinary environments or conditionsf you intend to uProducts under any special or
extraordinary environments or conditions (as exemfied elow), youindeeverification and confirmation of
product performance, reliability, etc, prior to use, st necessary:
[a] Use of our Products in any types of liquid, iluding water, oils, chemals, and organic solvents
[b] Use of our Products outdoors or in pcwhere the Producae xposed to direct sunlight or dust
[c] Use of our Products in places whthe Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places whethe Products are oed to static electricity or electromagnetic waves
[e] Use of our Products in proto heat-prodmponents, plastic cords, or other flammable items
[f] Sealing or coating our Prowith resin or ing materials
[g] Use of our Products without cleaning residue o(even if you use no-clean type fluxes, cleaning residue of
flux is recommende; or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Pcts in places subjecdw condensation
4. The Producnot subject to radiation-proof design.
5. Please verify aconfirm chacteris f the final or mounted products in using the Products.
6. In pular, if a transienad arge amount of load applied in a short period of time, such as pulse. is applied,
confirman of performance haracteristics after on-board mounting is strongly recommended. Avoid applying power
ding normal rated powerexceeding the power rating under steady-state loading condition may negatively affect
ct performance and reliability.
De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
Rev.003
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. e take proper
caution in your manufacturing process and storage so that voltage exceeding the Products mimung will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body uipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stn the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability oducts out of recommened storage time period
may be degraded. It is strongly recommended to confirm solderlity fore using Products owhich storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is icaed on a carton with symbol. Otherwise bent leads
may occur due to excessive stress applied when droppof a carton.
4. Use Products within the specified time after openia midity barrier bagaking irequired before using Products of
which storage time is exceeding the recommended orage time period
Precaution for Product Label
A two-dimensional barcode printed on ROHrodcts label is for M’s internal use only.
Precaution for Disposition
When disposing Products please dispoem properly uuthorized industry waste company.
Precaution for Foreign Exchane ad Foreign Trade act
Since concerned goods mbe fallen under listed ems of export control prescribed by Foreign exchange and Foreign
trade act, please consult ROHM in case of eo
Precaution Regantellectual Propey Rights
1. All informationd data including not limited to application example contained in this document is for reference
only. ROHM donot warrant at fgoing information or data will not infringe any intellectual property rights or any
otherhts of any third party reing such information or data.
2. ROHM ll not have any bligations where the claims, actions or demands arising from the combination of the
cts with other articles suh as components, circuits, systems or external equipment (including software).
. cense, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
Rev.003
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s
representative.
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way ponsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or rors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明