RB886G_05 [ROHM]
Schottky barrier diode; 肖特基二极管
| 型号： | RB886G_05 |
| 厂家： | 
ROHM |
| 描述： | Schottky barrier diode |
| 文件： | 总3页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RB886G
Diodes
Schottky barrier diode
RB886G
zApplications
zExternal dimensions (Unit : mm)
zLand size figure (Unit : mm)
High frequency detection
0.5
0.13±0.03
0.6±0.05
zFeatures
1) Small mold type. (VMD2)
2) Low Ct and high detection efficiency.
VMD2
zConstruction
Silicon epitaxial planar
zStructure
0.27±0.03
0.5±0.05
ROHM : VMD2
dot (year week factory)
zTaping specification (Unit : mm)
0.18±0.05
φ1.5+0.1
ꢀꢀꢀꢀꢀ0
2±0.05
4±0.1
φ0.5
0.3
0.65±0.05
4±0.1
2±0.05
0.76±0.1
zAbsolute maximum ratings (Ta=25°C)
Parameter
Limits
Symbol
VRm
VR
Unit
Reverse voltage
Reverse voltage
15
5
V
V
Forward current
Junction temperature
Storage temperature
IF
10
125
-40 to +125
mA
℃
℃
Tj
Tstg
zElectrical characteristics (Ta=25°C)
Parameter
Conditions
IF=1mA
Symbol
Min.
Typ.
Max.
0.35
120
0.8
Unit
V
Forward voltage
VF
IR
-
-
-
-
-
VR=5V
Reverse current
µA
pF
VR=1V , f=1MHz
Capacitance between terminals
Ct
0.53
Rev.A
1/2
RB886G
Diodes
zElectrical characteristic curves (Ta=25°C)
10
1
1000
f=1MHz
Ta=125℃
Ta=75℃
1
0.1
100
10
1
Ta=-25℃
Ta=25℃
Ta=25℃
Ta=75℃
Ta=-25℃
Ta=125℃
0.1
0.01
0
1
2
3
4
5
0
300
600
900
1200
1500
0
1
2
3
4
5
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
FORWARD VOLTAGE：VF(mV)
VF-IF CHARACTERISTICS
REVERSE VOLTAGE：VR(V)
VR-IR CHARACTERISTICS
1
300
290
280
270
260
250
300
250
200
150
100
50
Ta=25℃
Ta=25℃
VR=5V
n=30pcs
Ta=25℃
IF=1mA
n=30pcs
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
f=1MHz
VR=1V
n=10pcs
AVE:0.520pF
AVE:21.63uA
AVE:275.2mV
0
VF DISPERSION MAP
IR DISPERSION MAP
Ct DISPERSION MAP
5
1000
100
10
Rth(j-a)
4
3
2
1
0
Rth(j-c)
IF=100mA
AVE:1.47kV
Mounted on epoxy board
IM=10mA
AVE:0.48kV
time
1ms
300us
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
0.001 0.01
0.1
1
TIME:t(s)
Rth-t CHARACTERISTICS
10
100
1000
ESD DISPERSION MAP
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
相关型号：
©2020 ICPDF网 联系我们和版权申明