RFN20NS3S [ROHM]
罗姆的快速恢复二极管具有超高速且低VF、有利于大幅提高开关电源効率,降低功率损失。;型号: | RFN20NS3S |
厂家: | ROHM |
描述: | 罗姆的快速恢复二极管具有超高速且低VF、有利于大幅提高开关电源効率,降低功率损失。 快速恢复二极管 开关 |
文件: | 总7页 (文件大小:470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
Super Fast Recovery Diode
RFN20NS3S
ꢀSerise
ꢀDimensions(Unit : mm)
ꢀLand Size Figure(Unit : mm)
Standard Fast Recovery
RFN20
NS3S
ꢀApplications
General rectification
䐟㻌
ꢀFeatures
LPDS
1)Low switching loss
2)High current overload capacity
ꢀ
Structure
ROHM : LPDS
JEITA : TO263S
䐟㻌
Manufacture Date
ꢀConstruction
Silicon epitaxial planer type
ꢀTaping Dimensions(Unit : mm)
ꢀAbsolute Maximum Ratings(Tc=25°C)
Parameter
Repetitive peak reverse voltage
Reverse voltage
Conditions
Duty䍺0.5
Limits
Symbol
VRM
Unit
V
350
350
VR
Direct voltage
V
Average rectified foward current
Forward current surge peak
Junction temperature
60Hz half sin wave , Resistive load
60Hz half sin wave , Non-repetitive at Tj=25°C (*1)
Tc=71°C
20
Io
IFSM
Tj
A
100
A
150
°C
°C
Storage temperature
ꢁ55 to ꢂ150
Tstg
(*1) 1-3pin common circuit
ꢀElectrical Characteristics(Tj=25°C)
Parameter
Conditions
IF=20A
Min.
䠉
Typ.
1.1
0.05
25
Max.
1.35
10
Symbol
VF
Unit
V
Forward voltage
VR=350V
IR
䠉
Reverse current
μA
IF=0.5A,IR=1A,Irr=0.25×IR
Junction to case
䠉
35
Reverse recovery time
Thermal resistance
trr
ns
䠉
㸫
2.5
Rth(j-c)
°CꢀW
WWWꢀROHMꢀCOM
Ú ꢁꢂꢃꢁ 2/(- #Oꢀꢄ ,TDꢀ !LL RIGHTS RESERVEDꢀ
1/4
2012.06 - Rev.A
Data Sheet
RFN20NS3S
ꢀ
100000
10000
1000
100
100
10
1
Tj=150°C
Tj=125°C
Tj=75°C
Tj=25°C
Tj=150°C
Tj=125°C
Tj=75°C
Tj=25°C
10
1
0.1
0
0
50
100
150
200
250
300
350
200 400 600 800 1000 1200 1400 1600 1800
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
1000
100
10
1140
1120
1100
1080
1060
1040
1020
1000
IF=20A
VR=350V
Tj=25°C
Tj=25°C
AVE:33.0nA
AVE:1079mV
1
VF DISPERSION MAP
IR DISPERSION MAP
450
440
430
420
410
400
390
380
370
360
350
1000
100
10
f=1MHz
f=1MHz
VR=0V
Tj=25°C
AVE:412pF
1
0
5
10
15
20
25
30
Ct DISPERSION MAP
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
2/4
2012.06 - Rev.A
Data Sheet
RFN20NS3S
ꢀ
30
25
20
15
10
5
400
380
360
340
320
300
280
260
240
220
200
IF=0.5A
IR=1.0A
Irr=0.25×IR
AVE:331A
Tj=25°C
AVE:24.9ns
IFSM
8.3ms
1cyc.
0
IFSM DISPERSION MAP
trr DISPERSION MAP
1000
100
10
1000
100
10
IFSM
8.3ms 8.3ms
1cyc.
IFSM
time
1
1
1
1
10
100
10
100
NUMBER OF CYCLES
TIME:t(ms)
IFSM-CYCLE CHARACTERISTICS
IFSM-t CHARACTERISTICS
30
25
20
15
10
5
100
10
1
No Break at 30kV
Rth(j-a)
Rth(j-c)
AVE:2.01kV
0.1
0.001
0
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
0.1
10
1000
TIME:t(s)
Rth-t CHARACTERISTICS
ESD DISPERSION MAP
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
3/4
2012.06 - Rev.A
Data Sheet
RFN20NS3S
ꢀ
35
30
25
20
15
10
5
50
45
40
35
30
25
20
D.C.
Io
D=0.8
0A
0V
VR
t
D=0.5
half sin wave
D=t/T
VR=350V
Tj=150°C
D.C.
D=0.8
D=0.5
T
D=0.2
half sin wave
D=0.1
D=0.05
D=0.2
D=0.1
15
10
5
D=0.05
0
0
0
5
10
15
20
25
30
35
0
30
60
90
120
150
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Io-Pf CHARACTERISTICS
AMBIENT TEMPERATURE:Ta(°C)
DERATING CURVE(Io-Ta)
35
30
25
20
15
10
5
Io
VR
0A
D.C.
0V
t
D=0.8
D=t/T
VR=350V
Tj=150°C
T
D=0.5
half sin wave
D=0.2
D=0.1
D=0.05
0
0
30
60
90
120
150
CASE TEMPERATURE:Tc(°C)
DERATING CURVE(Io-Tc)
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
4/4
2012.06 - Rev.A
Daattaasshheeeett
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
Daattaasshheeeett
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall not be in an y way responsible or liable for failure, malfunction or accident arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s
representative.
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
RFN20NS3SFH
Rectifier Diode, 1 Phase, 1 Element, 20A, 350V V(RRM), Silicon, TO-263AB, LPDS, TO-263S, 3/2 PIN
ROHM
RFN20T2DFH
Rectifier Diode, 1 Phase, 2 Element, 10A, 200V V(RRM), Silicon, TO-220AB, TO-220FN, 3 PIN
ROHM
RFN20TB4SFH
Rectifier Diode, 1 Phase, 1 Element, 20A, 430V V(RRM), Silicon, TO-220AC, TO-220FN, 3/2 PIN
ROHM
©2020 ICPDF网 联系我们和版权申明