SFR10EZPF [ROHM]

SFR10EZPF是罗姆的抗硫化贴片电阻器，凭借独创的内部结构，实现了比通用的贴片电阻器更高的抗硫化特性。适用于对高可靠性提出更高要求的组件、电路。;


型号：	SFR10EZPF
厂家：	ROHM
描述：	SFR10EZPF是罗姆的抗硫化贴片电阻器，凭借独创的内部结构，实现了比通用的贴片电阻器更高的抗硫化特性。适用于对高可靠性提出更高要求的组件、电路。电阻器
文件：	总8页 (文件大小：1054K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Sulfur tolerant chip resistors

SFR series

Datasheet

●Features

1) Special construction prevents sulfur gas penetration, significantly increasing

reliability.

2) ROHM resistors have obtained ISO9001 / IATF16949 certification.

3) Corresponds to AEC-Q200.

●Products list

Limiting

element

voltage

Operating

temperature

range

Rated

power(70°C)

Temperature Resistance

Automotive

Grade

Available

Size

Resistance range

coefficient

tolerance

Part No.

(Ω)

(mm) (inch)

(W)

(V)

(ppm/ °C)

+500/-250

±100

(%)

(°C)

1.0≦R<10 (E24/96 series)

10≦R≦2.2M (E24/96 series)

1.0≦R＜10 (E24 series)

10≦R≦10M (E24 series)

F(±1%)

J(±5%)

0.063

SFR01

1005

0402

-55 ～ +155

Yes

500/-250

±200

( Jumper type ) Resistance : Max. 50mΩ, Rated current ： 1A

±100

±400

±200

F(±1%)

10≦R≦10M (E24/96 series)

1.0≦R<10 (E24 series)

10≦R≦10M (E24 series)

0.1

SFR03

SFR10

1608

2012

0603

0805

J(±5%)

-55 ～ +155

Yes

( Jumper type ) Resistance : Max. 50mΩ, Rated current ： 1A

±100

±400

±200

F(±1%)

10≦R≦2.2M (E24/96 series)

1.0≦R<10 (E24 series)

10≦R≦10M (E24 series)

0.125

150

J(±5%)

( Jumper type ) Resistance : Max. 50mΩ, Rated current ： 2A

±100

±400

±200

F(±1%)

10≦R≦2.2M (E24/96 series)

1.0≦R<10 (E24 series)

10≦R≦10M (E24 series)

0.25

0.5

200

SFR18

SFR25

3216

3225

1206

1210

J(±5%)

-55 ～ +155

Yes

( Jumper type ) Resistance : Max. 50mΩ, Rated current ： 2A

±100

±200

F(±1%)

J(±5%)

10≦R≦1M (E24/96 series)

1≦R≦1M (E24 series)

200

( Jumper type ) Resistance : Max. 50mΩ, Rated current ： 2A

* Design and specifications are subject to change without notice.

Carefully check the specification sheet supplied with the product before using or ordering it.

* E24 : Standard products, E96 : Build to order.

●Part Number Description

SFR

MZP

105

Resistance

tolerance

F (±1%)

Size (mm)[inch]

Type code

Nominal resistance

Part No.

Resistance code, 3 or 4 digits.

000 denotes jumper type.

SFR

01 (1005) [0402]

03 (1608) [0603]

10 (2012) [0805]

18 (3216) [1206]

25 (3225) [1210]

Packaging

specifications

Quantity

/ Reel

Part No. Code

SFR01

SFR03 EZP

J (±5%)

(Sulfur tolerant chip

resistors)

Resistance

code

Paper tape

( 2mmPitch)

Paper tape

MZP

10,000

5,000

4,000

tolerance

4 digits

3 digits

( 4mmPitch)

Paper tape

EX)

SFR10

SFR18

EZP

1Ω = 1R0 (±5%)

9.1Ω = 9R1 (±5%)

10Ω = 10R0 (±1%)

( 4mmPitch)

Paper tape

( 4mmPitch)

Embossed tape

( 4mmPitch)

100

1MΩ = 1004 (±1%)

105 (±5%)

(±5%)

SFR25 JZP

www.rohm.com

1/5

2022.12 - Rev.006

SFR series

Datasheet

●Chip resistor dimensions and markings

■SFR 01

■SFR 03/10/18/25

・SFR03

For E24 series, There are three or four digits

used for the calculation number and “R” is used

for the decimal point.

For E96 series, the nominal resistance is

expressed in 3 digits. The first 2 digits is symbol

to the resistance value and the last one is

symbol to multipliers.

(Please see P. 5)

・SFR10/18/25

There are three or four digits used for the

calculation number and “R” is used for the

decimal point.

(Unit : mm)

Marking existence

*Including jumper type

Part No. (mm)

(inch)

0402

0.25+0.05

-0.10

SFR01

SFR03

SFR10

SFR18

SFR25

1005

1608

2012

3216

3225

1.00±0.05

0.50±0.05

0.35±0.05

0.33±0.08

0603

0805

1206

1210

1.60±0.10

2.00±0.10

0.80±0.10

1.25±0.10

1.60±0.15

2.50±0.15

0.45±0.10

0.55±0.10

0.40±0.20

0.50±0.25

0.30±0.20

0.40±0.20

0.50±0.25

Yes

3.20+0.15

-0.20

3.20+0.15

-0.20

●Land pattern example

(Unit : mm)

Dimensions

Part No.

SFR01

SFR03

SFR10

SFR18

SFR25

0.50

1.30

2.00

2.60

4.00

0.50

0.80

1.15

1.50

2.30

0.40

0.50

0.70

0.90

1.00

1.20

2.20

www.rohm.com

2/5

2022.12 - Rev.006

SFR series

Datasheet

●Derating curve

When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curve below.

■SFR 01/03/10/18/25

●Characteristics

Guaranteed value

Test items

Test conditions

Resistor type

Jumper type

Resistance

See P.1

20°C

Variation of resistance

with temperature

Overload

Measurement : +25/+125°C

±(2.0％＋0.1Ω)

MAX. 50mΩ

Rated voltage(current)×2.5， 2s

Test voltage is the smaller one of ① or ②

①Rated voltage (current)X2.5, 2s

②Maximumꢀoverload voltage※

Solderability

A new uniformcoating of minimumof 95% of the Rosin-ethanol solution(25% mass)

surface being immersed and no soldering

Soldering condition : 245±5℃

Duration of immersion : 2.0±0.5s

damage.

Resistance to soldering

heat

±(1.0％＋0.05Ω)

MAX. 50mΩ

Soldering condition : 260±5°C

No remarkable abnormality on the appearance.

Duration of immersion : 10±1s

Rapid change of

temperature

±(1.0％＋0.05Ω)

MAX. 50mΩ

Test temp : -55℃～+125°C 1,000cycles

Damp heat, steady state

±(3.0％＋0.1Ω)

MAX. 100mΩ

85°C，85％(Relative humidity)

Test time : 1,000h

Rated voltage(current),70°C

1.5h:ON－0.5h:OFF

Test time : 1,000h

Endurance at 70°C

Endurance

±(3.0％＋0.1Ω)

MAX. 100mΩ

155°C

Test time : 1,000h

Resistance to solvent

±(1.0％＋0.05Ω)

MAX. 50mΩ

23±5°C, , Immersion cleaning, 5±0.5min

Solvent: 2-propanol

Bend strength of the end

face plating

Endurance with 90mm width

Deflection : 3mm (SFR01/03/10/18)

Without mechanical damage such as breaks.

±(1.0％＋0.05Ω) MAX. 50mΩ

Deflection : 1mm (SFR25)

Resistance in Sulfur vapor

Put specimen and sulfur powder 10g

in the desiccator which is placed under

110°C environment after sealed.

Test time : 1,000h

Compliance Standard(s) : IEC60115-1 / IEC60115-8

JIS C 5201-1 / JIS C 5201-8

※Maximum overload voltage (Voltage of overload test)

SFR01

100V

SFR03

100V

SFR10

200V

SFR18

400V

SFR25

400V

www.rohm.com

3/5

2022.12 - Rev.006

SFR series

Datasheet

●Tape dimensions

■Paper tape

(Unit : mm)

Part No.

SFR01

SFR03

SFR10

SFR18

8.0±0.3

3.5±0.05

1.75±0.1

0.7±0.1

1.2±0.1

1.1±0.1

1.9±0.1

2.4+0.2

-0.1

3.5+0.15

-0.05

1.65+0.2

-0.1

1.95+0.1

-0.05

Top tape

Base paper

Part No.

SFR01

SFR03

SFR10

SFR18

(Bottom tape)

Cavity

Components

Φ1.5+0.1

4.0±0.1

2.0±0.05

4.0±0.1

2.0±0.05

MAX1.1

Φ1.5+0.1

(Unit : mm)

■Embossed tape

Part No.

SFR25

8.0±0.3

3.5±0.05

1.75±0.1

3.0±0.1

3.5±0.1

Part No.

Φ1.5+0.1

SFR25

4.0±0.1

2.0±0.05

MAX1.1

●Reel dimensions

Using two kinds of reels for taping.

(Unit : mm)

Part No.

SFR01

SFR03

SFR10

SFR18

SFR25

Φ180 0

Φ60 +1.0

9 +1.0

Φ13±0.2

-1.5

www.rohm.com

4/5

2022.12 - Rev.006

SFR series

Datasheet

●Markings of SFR03

1. Marking method :

For E24 series, there are three digits used for the calculation number and

“R” is used for the decimal point.

Example : 100kΩ = 104

2.2Ω = 2R2

For E96 series, the nominal resistance is expressed in 3 digits. The first 2 digits is symbol

to the resistance value and the last one is symbol to multipliers.

But E24 series in E96 follows original E24 series Marking.

Example : 10.2kΩ=102×10²Ω⇒02C

2.05Ω=205×10^-2Ω⇒31Y

Symbol

E96

100

102

105

107

110

113

115

118

121

124

127

130

133

137

140

143

147

150

154

158

162

165

169

174

Symbol

E96

178

182

187

191

196

200

205

210

215

221

226

232

237

243

249

255

261

267

274

280

287

294

301

309

Symbol

E96

316

324

332

340

348

357

365

374

383

392

402

412

422

432

442

453

464

475

487

499

511

523

536

549

Symbol

E96

562

576

590

604

619

634

649

665

681

698

715

732

750

768

787

806

825

845

866

887

909

931

953

976

*Hatching areas are overlapping E24 series

Alphabet

10^-2

10^-1

10⁰

10¹

10²

10³

10⁴

Multipliers

2. Marking direction: Standard, Resistor surface marking.

3. Marking colors: Yellowish white marking or other appropriate marking.

www.rohm.com

5/5

2022.12 - Rev.006

Notice

Precaution on using ROHM Products

1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment,

OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you

intend to use our Products in devices requiring extremely high reliability (such as medical equipment ^{(Note 1)}, transport

equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car

accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or

serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.

Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any

damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific

Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅣ

CLASSⅡb

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are designed and manufactured for use under standard conditions and not under any special or

extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any

special or extraordinary environments or conditions. If you intend to use our Products under any special or

extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of

product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.

However, recommend sufficiently about the residue.) ; or Washing our Products by using water or water-soluble

cleaning agents for cleaning residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in

the range that does not exceed the maximum junction temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Notice-PGA-E

Rev.004

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl₂, H₂S, NH₃, SO₂, and NO₂

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Notice-PGA-E

Rev.004

Daattaasshheeeett

General Precaution

1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.

ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this document is current as of the issuing date and subject to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales

representative.

3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.

Notice – WE

Rev.001

SFR10EZPF [ROHM]

相关型号：

SFR10EZPJ

SFR10EZPJ000

SFR10R-1/5STE1

SFR10R-1STAE1LF

SFR10R-1STE1

SFR10R-5STE1

SFR10R-5STE1LF

SFR12-1STE1

SFR12-5STE1

SFR12R-1/5STE1

SFR12R-1STAE1LF

SFR12R-1STE1