SML-012V8TT86 [ROHM]
Single Color LED, Red, Colorless Transparent, 2.3mm, 3 X 2 MM, 1.30 MM HEIGHT, ROHS COMPLIANT, 1208, 2 PIN;
| 型号： | SML-012V8TT86 |
| 厂家： | 
ROHM |
| 描述： | Single Color LED, Red, Colorless Transparent, 2.3mm, 3 X 2 MM, 1.30 MM HEIGHT, ROHS COMPLIANT, 1208, 2 PIN 光电 |
| 文件： | 总13页 (文件大小：672K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SML-012x/013x Series
ꢀꢀꢀꢀ
Data Sheet
■Features
■Outline
• Reflector type (3.0×2.0mm, t=1.3mm)
• Reflector improved the concentration of viewing angle
and luminous intensity to the front direction
■Size
Color
Type
V
Y
U
D
P
3020 (1208)
3.0×2.0mm (t=1.3mm)
M
■Dimensions
■ecomnded Solder Pattern
+0.2
1.3 -0.1
3.0
2.3
0.3
0.5
1.6
1.45
1.5
Through Hole
Cathode Index
1.45
2-R0.3
PCB Bonding Direction
Tolerance :
: m
(unit : mm)
1.6
■Specifications
Aolute Maximum Ratin(Ta=25ºC)
Electrical and Optical Characteristics (Ta=25ºC)
Peak Forward
Emitt
Color
Forward
Revers
Vo
Forward Voltage VF Reverse Current IR
Luminous Intensity IV
wer
Dominant Wavelength λD
Chip Structure
perTemp. Storage Temp.
Part No.
Min.*2
Max.*2
ation
Current
Current
IF
VR
IF
IF
Typ.
Max.
Typ.
Min. Typ.
PD(mW) IF(mA) IFP(R(V)
Topr(ºC)
Tstg(ºC)
(V) (mA) (µA)
(V)
(nm) (nm) (nm) (mA) (mcd) (mcd) (mA)
SML-012VT(A)
SML-012V8
SML-013UT
75
54
7
54
0
2
30
-40～+100
-40～ +85
-30～ +85
-40～ +85
2.0
2.2
2.0
2.2
626
625
636
635
35.5 71
25 63
630
Red
619 624 629
615 620 625
618 624 630
603 605 609
602 605 608
602 606 610 20
585 587 590
90 220
40 100
36 100
71 140
63 160
36 100 20
56 112
40 100
100 250
36 100
SML-0
SML-
75
54
75
54
75
30
20
30
20
30
-40～+100
-40～ +85
-40～+100
2.0
2.2
-012DT(A)
12D8T
SML-012DT
100*1
Orange
Yellow
AlGaInP
5
-40～+100
20
10
5
2.0
SML-012YT(A)
SML-012Y8T
SML-013YT
-40～+85
-40～ +85
-40～+100
-40～+85
-40～+100
-40～+85
2.2
2.1
2.0
2.2
2.1
2.2
587 590 593
SML-012YT
586 590 594
569 572 575
558 560 564
557 560 563
Yellowish Green
SML-012M8T
SML-012PT(A)
SML-012P8T
54
62
54
20
25
20
16
9
40
18
10
60*1
Green
100*1
2.5
*1: Duty1/10, 1kHz *2 : Measurement tolerance:±1nm
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
1/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
- Forward Voltages
100
Fig.2 Luminous Intensity -
ꢀꢀꢀꢀꢀAtmosphere Temperature
1.6
SML-012V8T
SML-012U8T
SML-012D8T
SML-012Y8T
SML-012M8T
SML-012P8T
Ta=25ºC
IF=20mA
1.4
1.2
1
10
0.8
0.6
0.4
SML8T
SM2U8
SML28T
L-012Y8T
012M8T
L-012P8T
1
1.4
1.6
1.8
2.0
2.2
2.4
2.6
40 -20
0
20
40
60
80
100
FORWARD VOLTAGE : VF [V]
ATMOSPHETEPERATURE : Ta [ºC]
Fig.3 Luminous Intensity - Forward Currnt
ig.4 Derating
1.2
3
20
10
0
SML-012V8T
SML-012V8T
SML-012U8T
SML-012D8T
SML-012Y8T
SML-012M8T
SML-012P8T
Ta=25ºC
SML-012U8T
SML-012D8T
SML-012Y8T
SML-012M8T
SML-012P8
1.0
0.8
0.6
0.4
0.0
-40 -20
0
20
40
60
80 100
0
5
10
15
20
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
2/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
- Forward Voltages
Fig.2 Luminous Intensity -
ꢀꢀꢀꢀꢀAtmosphere Temperature
1.6
1.4
1.2
1
100
Ta=25ºC
SML-012UT
SML-012DT
SML-012YT
IF=A
10
0.8
0.6
0.4
0.2
12UT
-012DT
SML-012YT
1
-40
-20
0
0
40
60
80
100
1.2
1.4
1.6
1.8
2.0
2.2
2.4
FORWARD VOLTAGE : VF [V]
ATMOSPHTMPERATURE : Ta [ºC]
Fig.3 Luminous Intensity - Forwurrent
Fig.4 Derating
40
1.6
SML-012UT
SML-012DT
SML-012YT
Ta=25ºC
SML-012UT
SML-012DT
SML-012YT
30
20
10
0
1.2
0.8
.4
0.0
-40
-20
0
20
40
60
80
100
0
5
10
15
20
25
30
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
3/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
Fig.2 Luminous Intensity -
- Forward Voltages
ꢀꢀꢀꢀꢀAtmosphere Temperature
100
1.6
1.4
1.2
1
SML-013UT
SML-013UT
SML-013YT
Ta=25ºC
IF=20mA
SML-013YT
10
0.8
0.6
0.4
0.2
1
-
-20
0
20
40
60
80
100
1.4
1.6
1.8
2.0
2.2
2.4
2.6
FORWARD VOLTAGE : VF [V]
ATMOSPHERE EMRATURE : Ta [ºC]
Fig.3 Luminous Intensity - ForwarCuent
Fi4 Derating
40
1.6
SML-013UT
SML-013YT
Ta=25ºC
SML-013UT
SML-013YT
30
20
10
0
1.2
0.8
0.4
0.0
-40
-20
0
20
40
60
80
100
0
5
10
15
20
25
30
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
4/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Electrical Characteristics Curves
Reference
Fig.1 Forward Current
Fig.2 Luminous Intensity -
ꢀꢀꢀꢀꢀAtmosphere Temperature
- Forward Voltages
1.6
1.4
1.2
1
100
IF=20mA
SML-012VT(A)
SML-012DT(A)
SML-012YT(A)
SML-012PT(A)
Ta=25ºC
10
0.8
0.6
0.4
0.2
SMLVT()
ML-0(A)
-012YT(A)
12PT(A)
1
0
0
20
40
60
80
100
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
FORWARD VOLTAGE : VF [V]
ATMOSPHERE TEMRATURE : Ta [ºC]
Fig.3 Luminous Intensity - ForwarCuent
Fi4 Derating
1.6
40
SML-012VT(A)
SML-012DT(A)
SML-012YT(A)
SML-012PT(A)
a=25ºC
SML-012VT(A)
SML-012DT(A)
SML-012YT(A)
SML-012PT(A)
1.2
30
20
10
0
0.8
0
0.0
0
5
10
15
20
25
30
-40 -20
0
20
40
60
80 100
FORWARD CURRENT : IF [mA]
AMBIENT TEMPERATURE : Ta [ºC]
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
5/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Viewing Angle
Reference
SCANNING ANGLE (deg)
X - Y
X’ - Y’
SML-012/ 013 series
0°
10°
10°
20°
20°
30°
30°
40°
40°
50°
50°
60°
70°
80°
60°
70°
80°
90°
100
90°
100
50
0
50
RELATIVE INTENSITY (%)
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
6/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
*Measurement tolerance:±10%
ꢀꢀꢀꢀ
■Rank Reference of Brightness*
Red(V,U)
(Ta=25ºC, IF＝20mA)
Rank
Iv (mcd)
J K
2.5〜4.0 4.0〜6.3
L
6.3〜10 10〜16 16〜25 25〜40 40〜63
M
N
P
Q
R
S
T
U
V
W
X
1000〜1600
630〜1000
63〜100 100〜160 160〜250 250〜400 400〜630
SML-012V8T
SML-012U8T
SML-013UT
SML-012UT
Rank
Iv (mcd)
SML-012VT(A)
AG
AH
AJ
14〜18
AK
AL
AM
AN
AP
90〜112 112〜140 140〜180 180〜224 224〜280 280〜355 35550 450〜560
45〜56 56〜71 71〜90
AQ
AR
AS
AT
AU
AV
AW
AX
AY
AZ
9.0〜11.2 11.2〜14
18 〜22.4 22.4〜28 28〜35.5 35.5〜45
Please note that the brightness of some products may fall between (half rank)
Orange(D)
(Ta=25ºC, IF＝20mA)
Rank
Iv (mcd)
J K
2.5〜4.0 4.0〜6.3
L
6.3〜10 10〜16 16〜25 25〜40 40〜63
M
N
P
Q
R
S
T
U
V
W
X
630〜1000 1000〜1600
63〜100 100〜160 160〜250 250〜400 400〜630
SML-012D8T
SML-012DT
ランク
光度 (mcd)
SML-012DT(A)
AG
AH
AJ
14〜18
AK
AL
AM
AN
AP
90〜112 112〜140 140〜180 24〜280 280〜355 355〜450 450〜560
45〜56 56〜71 71〜90
AQ
AR
AS
AT
AU
AW
AX
AY
AZ
9.0〜11.2 11.2〜14
18 〜22.4 22.4〜28 28〜35.5 35.5〜45
Please note that the brightness somucts may fall between ranks (half rank)
Yellow(Y)
(Ta=, IF20mA)
Rank
Iv (mcd)
J K
2.5〜4.0 4.0〜6.3
L
6.3〜10 10〜16 16〜25 25〜40 40〜63
M
N
P
Q
R
S
T
U
X
1000〜1600
630〜1000
63〜100 100〜160 160〜250 250〜400
SML-012Y8T
SML-013YT
SML-012YT
Rank
Iv (mcd)
SML-012YT(A)
AG
AH
AJ
14〜18
AK
AL
AM
AN
AP
112 112〜140 140〜180 4 22〜280 280〜355 355〜450 450〜560
45〜56 56〜71 7190
AQ
AR
AS
AT
AU
AV
AW
AX
AY
AZ
9.0〜11.2 11.2〜14
18 〜22.4 22.4〜28 28〜35.5 35.5〜45
easnote that the brightness of sproducts may fall between ranks (half rank)
Yellowish Green/Green(M,P)
(Ta＝20mA)
Rank
Iv (mcd)
J K
2.5〜4.0 4.0〜6.3
L
6.3〜10 10〜16 16〜25 25〜40 40〜63
M
N
P
Q
R
S
T
U
V
X
000〜1600
630〜100
600 〜160 160〜250 250〜400 4630
SML-012M8T
SML-012P8T
Rank
Iv (mcd)
SML-012PT(A)
AG
AH
AJ
14〜18
AK
AL
AM
N
P
0〜1112〜140 140〜180 180〜224 224〜280 280〜355 355〜450 450〜560
45〜56 56〜71 71〜
AQ
AR
AT
AU
AV
AW
AX
AY
AZ
9.0〜11.2 11.2〜14
18 〜22.4 22.4〜28 28〜35.5 55
e nthat the brightness of some products may fall between ranks (half rank)
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
7/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Taping（T86）
±0.1
4
2±0.05
+0.1
0
φ1.5
Cathode index
2.4
1.6±0.1
11.4 ±1
Unit:ｍｍ
Packing quantity
2,500pcs/reel
Pull
direction
Note)Tolce is within ±0.2mm unless
oispecified.
■Part No. Construction
*"-"will be taken out for emitting color
cial de will be applied for
Eing color WB/B/E se
hromaticity rank
(for white LED）
Rank sign
WB/B/E series.
(Brightness Rank)*
S
M
L
－
0
1
U
T
8
6
P
Series name
Package
Chip type Emitting lor
Resin Color
Taping Specification
SML
Standar
Chip LED
.6 t=mm
.36mm
x0.8 t=0.55mm
P1
0
1
2
5
6
7
8
V
Red
Red
T
W
B
Transparent Colorless
Milkey White
Black
T86
T87
1
Cathode at sprocket hole side(the top)
Anode at sprocket hole side(the top)
For white LED,
Lent Type
D1
H1
M1
01
Z1/ZN
A1
81/82
K1
S1
P2
52
P34
P36
U
ighess type
U2
D
Red
csthode at sprocket hole side
Orange
Yellow
Yellow
Yellow
Yellow
3
2.0x1.25 t=0.8mm
Y3
Y2
Y
3.0x2.0 t=1.3m
3.5x2.8 t=1.9mm
1.6x1.15 t=0.55mm
3.4x1.25 t=1.1mm
4.5x2.0 t=0.6mm
3.2x1.6 t=1.85mm
1.0x1.0 t=0.2mm
1.3x1.5 t=0.6mm
1.0x1.0 t=0.2mm
1.5x1.0 t=0.2mm
3.5x2.8 t=0.6mm
notice）S1 series、81 seires
T86 Cathode at sprocket hole side(the back)
Ultra High Brightness type
W
T68
Cathode at sprocket hole side(the top)
M2 Yellowish green
M
F
Yellowish green
Green
*Concerning the Brightness rank.
*Please refer to the rank chart above for
luminous intensity classification.
*Part name is individual for each rank.
*When shipped as sample,the part name will
be a representative part name.
General products are free of ranks.
Please contact sales if rank appointment
is needed.
P
Green
E
Green
B
Blue
WB
T
White
VN
Phototransistors
RGB Red/Green/Blue
SCM
Chip LED
3.0x1.5 t=2.2mm
01
■Packing Specification
ROHM LED products are being shipped with desiccant (silica gel) included in moisture-proof bags.
Pasting the moisture sensitive label on the outer surface of the moisture-proof bags
or enclosing the humidity indication card inside the bag is available upon request.
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Please contact the nearest sales office or distributer if necessary.
www.rohm.com
8/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
■Precaution (Surface Mount Device)
１．Storage
If the product is heated during the reflow under the condition of hygroscopic state,
it may vaporize and expand which will influence the performance of the product.
Therefore, the package is waterproof. Please use the product following the conditions:
・Using Conditions
Temperature
Classification
Humidity
Expiration Date
Within 1 year
Remark
①Before using 5〜30℃
30〜70%RH
Storage with waterproof packe
from Receiving
②After opening
Please storing in the airtight tainer
with our desiccant sili)
5〜30℃ Below 70%RH
Within 168h
package
・Baking
Bake the product in case of below:
①The expiration date is passed.
②The color of indicator (silica gel) turned from blue to colorless or from gen to pink.
(Even if the product is within the expiration date.)
・Baking Conditions
Temperature
60±3℃
Time
12〜24h
Hmidity
Bow 20%RH
・Bake products in reel.
・Reel and embossed tape are easy to be fomed when bag,
so please try not to apply stress on i
Remark
・Recommend bake once.
２．Application Methods
２－１．Precaution for Drive System and OMe
Design the circuit without the electric lod eeeding the AOLUTE MAXIMUM RATING that
applies on the products. If drive by constt voltage, it mcuse current deviation of the LED and
result in deviation of luminous inteso we recd to drive by constant current.
(Deviation of VF Value will cause dation of curreED.) Furthermore, for off mode,
please do not apply voltage nitheforward nor revere. Especially, for the products with the
Ag-paste used in the die bondi, there’s high ossibility to cause electro migration and result
in function failure.
２－２．Derating
ꢀThe Derating Cistics are bason the lifetime of luminous intensity and assumption
of degradation & cor change of seg esin or reflector. About its reliability,
please evaluate its using conditioand environment and use it after confirmed there is no problem.
２－３．Opation Life Span
There’s ssibility for intensity f light drop according to working conditions and environments
(applrrent, surrounding temperature and humidity, corrosive gases), please call our Sales
stfs for inquiries about the concerned application below.
time intensity of light life
On mode all the time
２－４．Applied Stress on Product
No resin hardening agent such as filler is used in the sealing resin of the product.
Therefore, please pay attention to the overstress on it which may influence its reliability.
２－５．Usage
The Product is LED. We are not responsible for the usage as the diode such as Protection Chip,
Rectifier, Switching and so on.
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
9/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
３．Others
３－１．Surrounding Gas
Notice that if it is stored under the condition of acid gas (chlorine gas, sulfured gas) or
alkali gas (ammonia), it may result in low soldering ability (caused by the change in quality of
the plating surface ) or optical characteristics changes (light intensity, chrominance) and change
in quality of cause die bonding (Ag-paste) materials. All of the above will function failure of
the products.
Therefore, please pay attention to the storage environment for mounted product (concern the
generated gas of the surrounding parts of the products and the atmospheric environment).
３－２．Electrostatic Damage
The product is part of semiconductor and electrostatic sensitive, there’s high possibty damaged
by the electrostatic discharge. Please take appropriate measures to avoid the static ctricity from
human body and earthing of production equipment. The resistance values of electrostac discharge
(actual values) vary with products, therefore, please call our Sales staffs for iuiries.
３－３． Electromagnetic Wave
Applications with strong electromagnetic wave such as, IH cooker, will infence the reliability of LED,
therefore please evaluate before using it.
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
10/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
４．Mounting
４－１. Soldering
・No resin hardening agent such as filler is used in the sealing resin of the product. Therefore, resin
expansion and moisture absorption at humidity will cause heat stress during soldering process and
finally has bad influence on the product’s reliability.
・The product is not guaranteed for flow soldering.
・Do not expose the product in the environment of high temperature (over 100℃) or rapid temperature
shift (within 3℃/sec. of temperature gradient) during the flow soldering of surrounding parts
In case of carrying out flow soldering of surrounding parts without recommended conditionslease
contact us for inquiries.
・Please set appropriate reflow temperature based on our product usage conditions nd cation.
・The max for reflowing is 2 times, please finish the second reflow soldering and flow oldering
with other parts within the usage limitation after open the moistureproof package.
・Compare with N2 reflow, during air reflow, because of the heat and surroundconditions,
it may cause the discoloration of the resin.
・For our product that has no solder resist, because of its solder amount asoering conditions,
ꢀone of its specific characteristics is that solder will penetrate into LED. usthere's high possibility
that will influence its reliability.Therefore, please be informed, concing t before using it.
４－２. Automatic Mounting
４-２-１. Silicon Resin Sealing Product
The sealing resin of LED is very soft, so please select adsorpn nzzle that woulnoapply stress
directly on the sealing section.
４-２-２. Mini Package (Smaller than 1608 size)
・Vibration may result in low mounting rate since it wl case the static etricity of product and
adhere to top cover tape. Therefore, the magnet oube set on pareer cassette of
the mounter to control the product stabilizatioIn ddition, it is remmended to set ionizer
to prevent electrostatic charge.
４－３. Mounting Location
The stress like bending stress of circuit oardividing afteounting, may cause LED package crack
or damage of LED internal junction, therere, please conn he mounting direction and position
to avoid bending or screwing with stress of uit board.
Stress strength according to
he mounting position:
A＞B＞C＞D
４４. Mechanical Stress after Mounting
1.6mm
echanical stress may damage the LED after Circuit Mounting,
please pay attention to the touch on product.
４－５．Soldering Pattern for Recommendation
1.45mm
1.5mm
We recommend the soldering pattern that shows on the right.
It will be different according to mounting situation of circuit board,
therefore, please concern before designing.
※The product has adopted the electrode structure that it should solder
with back electrode of the product.
1.45mm
Thus, please be informed that the shape of electrode pin of
solder fillet formation is not guaranteed.
The through hole on electrode surface is for conduction of front
ꢀand rear electrodes but not for formation of solder fillet.
PCB Bonding Direction
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
11/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
[SML-012x/013x series]
[Data Sheet]
ꢀꢀꢀꢀ
４－６．Reflow Profile
For reflow profile, please refer to the conditions below:(※)
■Meaning of marks, Conditions
Mark
Tsmax
Tsmin
ts
Meanings
Conditions
180℃
Maximum of pre-heating temperature
Minimum of pre-heating temperature
Time from Tsmin to Tsmax
Reference temperature
140℃
Over 60sec.
210〜250℃
TL
tL
Retention time for TL Within 40sec.
TP
Peak temperature
Time for peak temperature
Temperature rising rate
Temperature decreasing rate
250℃(Max)
Within 10sec.
Under 3℃/sec.
Over -3℃/sec.
tP
ΔTR/Δt
ΔTD/Δt
※Above conditions are for reference. Therefore, evaluate by customer’s own cuit boards and
reflow furnaces before using, because stress from circuit boards and temperariations of reflow
furnaces vary by customer’s own conditions.
４－７．Attention Points in Soldering Operation
This product was developed as a surface mount LED especially suor reflow soldering.
So reflow soldering is recommended. In case of implementing anusoldering,
please take care of following points.
①SOLDER USED
Sn-Cu，Sn-Ag-Cu，Sn-Ag-Bi-Cu
②HAND SOLDERING CONDITION
LED products do not contain reinforcement materisuh as a glas fil
So thermal stress by soldering greatly influence s riability.
Please keep following points for manual soldering
ITEM
RECOMEDED CONDIT
Condition ) Temp. f iron top less n
℃ within 3
Heating on Ppattern, noto the
LED. ig-1)
a) Heating method
SOLDERING IRON
Fig-1
Handling after
Please ndle after the part temp.
s down to room .
b)
soldering
SOLDERING
LAND
４８．Cleaning after Soldering
follow the conditions below if the cleaning is necessary after soldering.
Solvent
Temperature
Ultrasonic Cleaning
Drying
We recommend to use alcohols solvent such as, isopropyl alcohols
Under 30℃ within 3 minutes
15W／Below 1 liter (capacity of tank)
Under 100℃ within 3 minutes
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
12/12
©2016 ROHM Co., Ltd. All rights reserved
2017.5 - Rev.004
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safe
measures such as complying with the derating characteristics, implementing redunan
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall no
responsibility for any damages arising out of the use of our Poducts beyond the rating specifiey
ROHM.
4) Examples of application circuits, circuit constants and any other information conerein are
provided only to illustrate the standard usage and operations of the Productperipheral
conditions must be taken into account when designing circuits for mass proon.
5) The technical information specified herein is intended only to shthe icfunctions of and
examples of application circuits for the Products. ROHM does not gyou, explicitly or implicitly,
any license to use or exercise intellectual property or other righby ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any darising out of the use of
such technical information.
6) The Products are intended for use in general electronic eqment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment seas ll as the applicaonindicated in
this document.
7) The Products specified in this document are nesigned to be radiation nt.
8) For use of our Products in applications iring a high degree of rbilit(as exemplified
below), please contact and consult witROM representative : tnsporton equipment (i.e.
cars, ships, trains), primary communicatiequipment, traffic ghts, fi/crime prevention, safety
equipment, medical systems, servsolar cells, and power ansion systems.
9) Do not use our Products in apliions requiring extry high reliability, such as aerospace
equipment, nuclear power cool systems, and submreeaters.
10) ROHM shall have no ibility for any or injury arising from non-compliance with
the recommended usaditions and spcontained herein.
11) ROHM has usreasonable care to ensur thaccuracy of the information contained in this
document. Hover, ROHM does not warrants that such information is error-free, and ROHM
shall have no reonsibility for any dmages arising from any inaccuracy or misprint of such
informat
12) se ushe Products in accdce with any applicable environmental laws and regulations,
as the RoHS DirectiFor more details, including RoHS compatibility, please contact a
OHM sales office. ROshall have no responsibility for any damages or losses resulting
-compliance wh anplible laws or regulations.
13) When providour ducts and technologies contained in this document to other countries,
you must abiby thprocedures and provisions stipulated in all applicable export laws and
regulations, inclng without limitation the US Export Administration Regulations and the Foreign
Exchange and Forign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102
A
相关型号：
SML-012VT(A)
Reflector improved the concentration of viewing angle and luminous intensity to the front direction
ROHM
SML-012VT(A)T86
Single Color LED, Red, Colorless Transparent, 2.3mm, 3 X 2 MM, 1.30 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
ROHM
SML-012WT(A)
Reflector improved the concentration of viewing angle and luminous intensity to the front direction
ROHM
©2020 ICPDF网 联系我们和版权申明