SMLZN4WBGUW(A) [ROHM]
罗姆的贴片LED除标准型之外,还备有顶视型贴片LED、侧面发光贴片LED、适用于背面贴装的贴片LED等产品系列。;型号: | SMLZN4WBGUW(A) |
厂家: | ROHM |
描述: | 罗姆的贴片LED除标准型之外,还备有顶视型贴片LED、侧面发光贴片LED、适用于背面贴装的贴片LED等产品系列。 |
文件: | 总20页 (文件大小:2777K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMLZN4WBGUW1(A)
Data Sheet
1. CONSTRUCTION
White Surface Mount Chip LEDs with reflector built-in protection diode
featuring InGaN packed with resin containing phosphor.
Source of light for display unit.
See Figure.1
2. USAGE *1
3. DIMENSIONS
4. ABSOLUTE MAXIMUM RATINGS *2
Power Dissipation
Forward Current
PD (Ta=25
IF (Ta=25
IFP (Ta=25
)
114mW
30mA
100mA
0.9V
・・・・・・・・
・・・・・・・・
・・・・・・・・
・・・・・・・・
・・・・・・・・
・・・・・・・・
℃
)
℃
1)
2)
)
℃
Peak Forward Current
Reverse Voltage
VR (Ta=25
)
℃
Operation Temperature Topr
Storage Temperature Tstg
-40 +85
~
℃
-40 +100
~
℃
1)
2)
Duty 1/10, 1kHz
Continuous reverse voltage is not supposed
5. ELECTRO-OPTICAL CHARACTERISTICS (Ta=25
)
℃
DISCRIPTION
SYMBOL CONDITION
MIN.
TYP.
MAX.
UNITS
3)
4)
3)
3)
Forward Voltage
VF
IV
x
IF=20mA
IF=20mA
IF=20mA
IF=20mA
2.6
3.3
2400
0.30
0.28
3.8
V
Luminous Intensity
1800
3600
mcd
-
-
-
-
-
-
Chromaticity Coordinates
y
3) Lighting time : 1msec
4) Lighting time : 10msec
ꢀ
6. LUMINOUS CLASSIFICATION *3
(Ta=25 , IF=20mA)
℃
SYMBOL
LUMINOUS CLASSIFICATION RANGE
"Y2"
"Z1"
"Z2"
1800
2200
2800
2200
2800
3600
mcd
mcd
mcd
~
~
~
Tolerance ±10%
:
www.rohm.com
©2023 ROHM Co., Ltd. All rights reserved
1/17
2023.3 - Rev.005
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
2/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
3/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
4/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
5/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
【PACKAGING REQUIREMENTS】
1. PACKING
(1) One reel is packed in aluminum bag.
ꢀ
ꢀꢀꢀ
The size of aluminum bag is 240(a)×250 280(b)mm.
~
(2) Aluminum bag is sealed by pressured for all directions.
(3) Insert the moisture indicator card to the aluminum bag.
(4) Print the “Electrical-Static Warning mark”label and
ꢀ
ꢀ
ꢀ
“MSL (Moisture Sensitivity Level : JEDEC compatible”label on the back side of aluminum bag.
ꢀꢀ
【
Front side】
Label position (Refer next page)
b
a
【
Back side】
Electrical-Static Warning Mark
MSL (Moisture Sensitivity Level)
handling caution
www.rohm.com
6/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
2. MARKING
The following information shall be described in the label on the aluminum bag.:
ROHM Type number, Packing quantity, Luminous intensity rank, and Lot number etc.
FORMER LABEL SPECIFICATION
Special Marking
【
】
ChromaticityCoordinates Rank
or Dominant Wavelengh Rank
Type No.
Luminous Intensity Rank
F
FOR ROHM ONLY
Country of
origin
Interoffice administration code
Color Detail Symbol
MSL Information, Customers part No. etc.
“F” means Pb-free, Quantity, Then Lot No. Displayed.
Note)
Indicates bar code expressed by code 39.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Indicates Pb-free Products.
EXAMPLE OF LOT NO. MARKING
【
】
20
03
00012
W
Production facility symbol
(Reference the manufactory list)
Serial number of lot
Production week
Production year
www.rohm.com
7/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
●Precaution (Surface Mount Device)
1.Storage
If the product is heated during the reflow under the condition of hygroscopic state, it may vaporize and expand
which will influence the performance of the product. Therefore, the package is waterproof. Please use the product
following the conditions:
Using Conditions
・
Classification
Temperature
Humidity
Expiration Date
Remark
Within 1 year from
Receiving
Before using
5
~
30
℃
30 70%RH
~
Storage with waterproof package
①
After opening
package
Please storing in the airtight container
with our desiccant (silica gel)
②
5
~
30
℃
Below 70%RH
Within 168h
Baking
・
・
Bake the product in case of below:
The expiration date is passed.
The color of 5% and 10% on humidity indicator card is not green.
①
②
(Even if the product is before expiration date.)
Baking Conditions
Temperature
Time
Humidity
60±3
40 48h
~
Below 20%RH
℃
Bake products in reel.
・
・
・
Remark
Reel and embossed tape are easy to be deformed when baking, so please try not to apply stress on it.
Recommend bake once.
2.Application Methods
2-1.Color of sealing resin
This product may differ in the color of the resin due to the influence of the material contained in the sealing resin.
There are no problems with the use.
2-2. Precaution for Drive System and Off Mode
Design the circuit without the electric load exceeding the ABSOLUTE MAXIMUM RATING that applies on the
products. If drive by constant voltage, it may cause current deviation of the LED and result in deviation of luminous
intensity, so we recommend to drive by constant current. (Deviation of VF value will cause deviation of current in
LED.) Furthermore, for off mode, please do not apply voltage neither forward nor reverse. Especially, for the
products with the Ag-paste used in the die bonding, there’s high possibility to cause electro migration and result in
function failure.
2-3. About derating
It is considered that derating characteristics will not result in LED chip’s electrical destruction. Even within the
derating, the reliability and luminous life can be affected depending on operating conditions and ambient
environment. So we would be appreciate it if you can confirm with your application again.
2-4. About product life
Depending on operating conditions and environment(applied current, ambient temperature and humidity, corrosive
gas), decreasing of luminosity and change of chromaticity may occur even within the specification conditions.
Please contact our sales office if you use it for the following applications.
It requires long luminosity life
It is always lit
ꢀ①
ꢀ②
2-5.Applied Stress on Product
The top of the LED is very soft, which the silicone resin is used as sealing resin.Therefore, please pay attention to
the overstress on it which may influence its reliability.
2-6.Usage
The product is LED. We are not responsible for the usage as the diode such as protection chip, rectifier, switching
and so on.
www.rohm.com
©2023 ROHM Co., Ltd. All rights reserved
8/17
2023.3 - Rev.005
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
3. Others
3-1. Surrounding Gas
Notice that if it is stored under the condition of acid gas (chlorine gas, sulfured gas) or alkali gas (ammonia), it
ꢀ
may result in low soldering ability (caused by the change in quality of the plating surface ) or optical
characteristics changes (light intensity, chrominance) and change in quality of die bonding (Ag-paste) materials.
All of the above will cause function failure of the products.
Therefore, please pay attention to the storage environment for mounted product (concern the generated gas of the
surrounding parts of the products and the atmospheric environment).
3-2. Electrostatic Damage
The product is part of semiconductor and electrostatic sensitive, there’s high possibility to be damaged by the
ꢀ
electrostatic discharge. Please take appropriate measures to avoid the static electricity from human body and
earthing of production equipment.Especially, InGaN type LEDs have lower resistance value of electrostatic
discharge and it is recommended to introduce the ESD protection circuit.The resistance values of electrostatic
discharge (actual values) vary with products, therefore, please call our Sales staffs for inquiries.
3-3. Electromagnetic Wave
Applications with strong electromagnetic wave such as, IH cooker, will influence the reliability of LED,
ꢀ
therefore please evaluate before using it.
www.rohm.com
©2023 ROHM Co., Ltd. All rights reserved
9/17
2023.3 - Rev.005
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
10/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
11/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
【MANUFACTORY】
FACTORY
SYMBOL
W
ROHM Wako Co.,Ltd.
100 Tomioka, Kasaoka, Okayama 714-8585 Japan
ROHM-Wako Electronics (Malaysia) Sdn. Bhd.
D
N
1
Lot 1320 Kawasan Perindustrian, Pengkalan ChepaII, Padang Tembak
16100 Kota Bharu, Kelantan, Malaysia
ROHM Semiconductor (China) Co.,Ltd.
No.7, Weisan Rd, Micro-electronics Ind, Jingang Highway
Xiqing Dist, Tianjin 300385
HARVATEK CORPORATION Taiwan OEM)
(
No.18, Lane522, Sec.5, JhonghuaRd, Hsinchu City 300,
Taiwan 30094
* This sheet is mentioned all factory locations of LED products.
Please contact us if you need detail information about each package.
www.rohm.com
©2023 ROHM Co., Ltd. All rights reserved
12/17
2023.3 - Rev.005
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
13/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
14/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
15/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
16/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
[SMLZN4WBGUW1(A)]
[Data Sheet]
ꢀꢀꢀꢀ
www.rohm.com
17/17
2023.3 - Rev.005
©2023 ROHM Co., Ltd. All rights reserved
ロ
Reliability Test Result
6
RR-SML-1710
Product
LED
Package
Series
SMD
SMLZN4WBGxW_A_series
1.Test Result
n
(pcs)
Pn
(pcs)
Reference
STD
J-STD-020D-01
Test Items
Test Condition
Solder Heat Resistance
for Reflow Soldering
Prtreatment : Temperature Humidity Strage
(30℃/70%RH/168hr)
Reflow Peak Temp. : 260℃ 10sec Over 230℃/60sec
Preheat : 140 to 180℃ 60sec
Number of reflow : 2 times
22
0
JESD22-B102E
Solderbility
Drop test
Immerse into rosin flux for 5±1sec,and the device
for 3±0.5sec into Pb-free solder bath at 245±5℃
22
22
22
22
22
22
22
22
0
0
0
0
0
0
0
0
*1
JEITA ED-4701
A-124
H=75cm Maple Boad : 3 times
JEITA ED-4701
A-121
Vibration
100~2000Hzꢀ98.1m/s2ꢀ
2hours each on each direction of X,Y,Z
JESD22-A104E Ta=Tstg Min.℃(30min.) ~ Tstg Max.℃(30min.) 100cycleꢀ
Thermal Cycle
JESD22-A103E Ta=Tstg Max.+5℃/-0℃
High Temperature
Strage
1000hrs
240hrs
JEITA ED-4701
B-121
High Temperature
High Humidity Strage
Ta=85±2℃ꢀ85±5%RH
JESD22-A119A
Low Temperature
Strage
Ta=Tstg Min.±5℃ꢀ 1000hrs
Ta=25±5℃ꢀIF=IFMax. 1000hrs
JESD22-A108D
Load Life
2.Failure Criteria
Items
Condition
IF=20mA
Criteria
Luminous Intensity
60% of the initial value
Changing rate of ±10%
Forward Voltage
Reverse Current
Appearance
IF=20mA
VR=VR Max.
Visual Check
Maximum of specification
No major change in appearance
*1
Solderbility
More than 95% of the electrode must be covered with solder.
※This data is actual value from specific lot and is not guaranteed.
www.rohm.com.
©2023 ROHM Co., Ltd. All rights reserved
2023.03-Rev.001
ロ
Notice
N o t e s
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions.
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1107
A
Daattaasshheeeett
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
SMM-101-01-F-D-P-TR
Board Connector, 2 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator
SAMTEC
SMM-101-01-F-S-P
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SMM-101-01-FM-D-P
Board Connector, 2 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator
SAMTEC
SMM-101-01-FM-D-P-TR
Board Connector, 2 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator
SAMTEC
SMM-101-01-FM-S-LC-K
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket
SAMTEC
SMM-101-01-FM-S-P
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SMM-101-01-H-S-LC-K
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket
SAMTEC
SMM-101-01-H-S-P
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
SMM-101-01-L-D
Board Connector, 2 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Socket
SAMTEC
SMM-101-01-P-S-K
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket,
SAMTEC
©2020 ICPDF网 联系我们和版权申明