11W161-8D5 [ROSENBERGER]
Crimping Tool;型号: | 11W161-8D5 |
厂家: | Rosenberger Hochfrequenztechnik GmbH & Co. KG |
描述: | Crimping Tool |
文件: | 总3页 (文件大小:681K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
Crimping Tool
11W161-8XX
f
Remarks
max. 500 pce on reel
Packing
Standard
Weight
1 pce in box
680 g
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Page
1 / 3
Tel. : +49 8684 18-0
Email : info@rosenberger.de
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Technical Data Sheet
Crimping Tool
11W161-8XX
Recorded
Suitable cables
RG 174 U
RTK 013
RTK 031
RG 058
RG 058 LL
Crimping height
11 W 161-800
11 W 161-801
11 W 161-8M4
11 W 161-806
11 W 161-8N8
0,78 ± 0,03
0,74 ± 0,03
0,88 ± 0,03
0,95 ± 0,03
1,15 ± 0,06
LEONI Dacar 037
Draka FL09YBCW 1,1/2,9 DKB
CommScope AMC-58 Low Loss EZ
Dacar 535
d
11 W 161-8E4
1,1 ± 0,03
11 W 161-8D5
0,73 ± 0,02
e
Crimping tool instructions for B-crimping center contact
Use of crimping tool
For preparation of cable and assembly to connector, see assembly instruction supplied with connector.
1. Insertion of centre contact
Assemble reel onto reel holder. Slide centre contact strip into feed unit and pay attention to the correct position to
the guide sheet. Push in centre contact strip until it engages into the notch handle. By operating the feed lever the
centre contact strip can be pushed forward gradually, until the first centre contact reaches the correct position
below the crimping jaws. (see picture)
2. Crimping
Close tool to the first stop position. Insert cable to stop surface on the crimping jaws (see picture). Close tool
completely until it releases itself. Remove crimped cable and operate feed lever for the next crimping process.
3. Removal of centre contact strip
Finish crimping process, press notch handle (marked red, arrow “release”) on the back side of tool and pull out the
centre contact strip.
4. Emergency release
In case the tool gets stuck during the crimping process, a screwdriver can be used to open the tool by loosing the
yellow marked emergency release on the back side (see picture).
ATTENTION: If tool is not used properly no liability will be taken!
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Page
2 / 3
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Technical Data Sheet
Crimping Tool
11W161-8XX
Change History
Rev. Date
Change
d00 02.10.13 Crimping tool included in table
e00 19.05.14 Crimping tool included in table
f00
03.12.14 Change the picture
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Date
Approved
M. Geiger
Date
Rev.
f00
Engineering change number
14-1785
Name
Date
H. Mühlfellner
20.10.05
03.12.14
T. Koschel
03.12.14
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Page
3 / 3
Tel. : +49 8684 18-0
Email : info@rosenberger.de
相关型号:
©2020 ICPDF网 联系我们和版权申明