MS-104-1 [RRE]
Ultra-miniature Reed Sensor; 超小型干簧传感器
| 型号： | MS-104-1 |
| 厂家： | 
Reed Relays and Electronics |
| 描述： | Ultra-miniature Reed Sensor |
| 文件： | 总2页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MS-104 Ultra-miniature Reed Sensor
10.16 mm PCB mounting pitch
Manufactured with internal blades parallel to top surface
All dimensions in mm
Does not require power for operation
Normally open (NO) form A contact
Omni-polar device; actuates with either pole of magnet
Lead (Pb) free and RoHS compliant
Applications
This reed sensor is suitable for use in the following applications and many others: telephone hook switches,
detergent level sensing in washing machines, electric tooth brushes, sewing machine pedals, fluid tank cap
sensing, two wheeler side stand, fluid level sensing, automobiles with electronic keys, survival rafts and
ELTs, hands free kits, fuel pumps, pedometers...
Specification
Contact Form
Contact Rating (max)
Switching Current (max)
Carry Current (max)
A
10.0
0.5
W / VA
A
A
0.5
Switching Voltage (max)
Breakdown Voltage (min)
Initial Contact Resistance (max)
Operating Temperature
Shock Resistance (½Sin wave for 11ms)
Vibration Resistance (10-2000Hz)
VDC
VDC
m
°C
g
g
100
150
200
-40 to +100
30
20
Ordering Code
MS-104-(Operate AT Code)
OAT Code
1
2
3
10 - 15
15 - 20
20 - 25
Cropping the leads will increase OAT and RAT
Example
MS-104-3 denotes 20-25 operate AT.
Due to continual improvement, specifications are subject to change without notice
www.reed-sensor.com
25 December 2006
Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022
MS-104 Ultra-miniature Reed Sensor
Actuation Distances
Operate and release distances for the MS-104 reed sensor in the three standard AT bands when actuated (as shown in the
sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Distances
given will vary if the reed sensor leads are cropped after soldering. Although some of the AT band / magnet combinations will
produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by
going through our AT band FAQ and our magnet selection guide.
MS-104-1 (10-15 AT)
Actuation Sketch
Magnet
NDR-T
NDC-T
NDR-S
NDC-S
NDR-M
NDC-M
NDR-L
NDC-L
Dimensions
4.0 x 1.5 x 1.5
Ø2.0 x 4.0
Operate Distance
2.0 - 3.0
Release Distance
2.5 - 3.5
3.0 - 3.5
3.5 - 4.0
6.0 x 2.5 x 2.5
Ø3.0 x 7.0
6.0 - 7.0
6.5 - 7.5
7.5 - 8.5
8.0 - 9.0
8.0 x 3.0 x 3.0
Ø4.0 x 10.0
8.5 - 10.0
10.0 - 12.0
15.0 - 17.5
24.5 - 27.0
9.5 - 11.0
11.5 - 13.0
16.5 - 19.0
26.5 - 29.0
19.0 x 4.0 x 4.0
Ø8.0 x 15.0
MS-104-2 (15-20 AT)
Actuation Sketch
Magnet
NDR-T
NDC-T
NDR-S
NDC-S
NDR-M
NDC-M
NDR-L
NDC-L
Dimensions
4.0 x 1.5 x 1.5
Ø2.0 x 4.0
Operate Distance
1.5 - 2.0
Release Distance
2.0 - 2.5
2.0 - 3.0
2.5 - 3.5
6.0 x 2.5 x 2.5
Ø3.0 x 7.0
5.0 - 6.0
5.5 - 6.5
6.0 - 7.5
6.5 - 8.0
8.0 x 3.0 x 3.0
Ø4.0 x 10.0
7.0 - 8.5
8.0 - 9.5
9.0 - 10.0
13.0 - 15.0
21.0 - 24.5
10.0 - 11.5
14.5 - 16.5
23.0 - 26.5
19.0 x 4.0 x 4.0
Ø8.0 x 15.0
MS-104-3 (20-25 AT)
Actuation Sketch
Magnet
NDR-T
NDC-T
NDR-S
NDC-S
NDR-M
NDC-M
NDR-L
NDC-L
Dimensions
4.0 x 1.5 x 1.5
Ø2.0 x 4.0
Operate Distance
1.0 - 1.5
Release Distance
1.5 - 2.0
1.5 - 2.0
2.0 - 2.5
6.0 x 2.5 x 2.5
Ø3.0 x 7.0
4.5 - 5.0
5.0 - 5.5
5.0 - 6.0
6.0 - 6.5
8.0 x 3.0 x 3.0
Ø4.0 x 10.0
6.0 - 7.0
7.0 - 8.0
7.0 - 8.5
8.0 - 9.5
19.0 x 4.0 x 4.0
Ø8.0 x 15.0
12.0 - 13.0
20.0 - 21.0
13.5 - 14.5
22.0 - 23.0
Due to continual improvement, specifications are subject to change without notice
www.reed-sensor.com
30 September 2006
Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022
相关型号：
©2020 ICPDF网 联系我们和版权申明