3.0SMC100A [RUILON]
Transient Voltage Suppressors; 瞬态电压抑制器
| 型号： | 3.0SMC100A |
| 厂家： | 
Ruilongyuan Electronics Co.,Ltd |
| 描述： | Transient Voltage Suppressors |
| 文件： | 总7页 (文件大小：882K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ELECTRONICS
Transient
Voltage
Suppressors
3.0SMC Series
Specifications are subject to change without notice.
Circuit Protection
System
Please refer to http://www.ruilon.com for current information.
Transient Voltage Suppressors - 3.0SMC Series
UNI
Features
1. Halogen-free
2. Rohs compliant
3. Typical maximum temperature coefficient
BR
BR
4. ΔV = 0.1% x V @25°C x ΔT
5. Glass passivated Chip junction in DO-214AB package
6. 3000W peak pulse capadility at 10×1000μs waveform, repetition rate (duty
cycles):0.01%
BI
7. Fast response time:typically less than 1.0ps from 0 Volts to BV min
8. Excellent clamping capability
9. Low incremental surge resistance
10. Typical IR less than 5μA above 12V
BI
Cathode
Anode
11. High temperature soldering guaranteed:260°C/40seconds/0.375”,(9.5
mm) lead length, 5lbs., (2.3kg) tension
12. Plastic package has underwriters laboratory flammability classification
94v-0
UNI
Applications
TVS devices are ideal for the protection of I/O interfaces,VCC bus and other vulnerable circuits used in telecom, computer,
industrial and consumer electronic applications.
Mechanical Characteristics
Rating
Symbol
PPPM
PD
Value
3000
6.5
Units
Watts
Watts
Amps
Peak Pulse Power Dissipation by 10x1000μs test
waveform (Fig.1)(Note 1)
Steady State Power Dissipation on
inifinite heat sink at TL=75°C (Fig. 5)
Peak Forward Surge Current, 8.3ms Single Half
Sine Wave Unidirectional only (Note 2)
Maximum Instantaneous Forward Voltage at 25A for
Unidirectional only (Note 3)
IFSM
300
VF
3.5
V
Operating junction and Storage Temperature Range.
Typical Thermal Resistance Junction to Lead
T T
-55°C to 175°C
°C
,
J
STG
RuJL
RuJA
15
75
°C/W
°C/W
Typical Thermal Resistance Junction
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute
maximum.
Specifications are subject to change without notice.
Circuit Protection
System
Page:1
Please refer to http://www.ruilon.com for current information.
Transient Voltage Suppressors - 3.0SMC Series
Electriacl Characteristics
Maximum
Clamping
Reverse
Leakage
Reverse Stand-
Off Voltage
Test
Current
Peak Pulse
Current
Type Number
Breakdown Voltage@I
T
Voltage@I
@V
PP
RWM
I (µA)
(UNI)
(BI)
V
(V)
V
(V)
V
(V)
I (mA)
V (V)
I
(A)
PP
RWM
BR MIN.
6.40
BR MAX.
7.25
T
C
R
3.0SMC6.8A
3.0SMC7.5A
3.0SMC8.2A
3.0SMC9.1A
3.0SMC10A
3.0SMC11A
3.0SMC12A
3.0SMC13A
3.0SMC15A
3.0SMC16A
3.0SMC18A
3.0SMC20A
3.0SMC22A
3.0SMC24A
3.0SMC27A
3.0SMC30A
3.0SMC33A
3.0SMC36A
3.0SMC39A
3.0SMC43A
3.0SMC47A
3.0SMC51A
3.0SMC56A
3.0SMC62A
3.0SMC68A
3.0SMC75A
3.0SMC82A
3.0SMC91A
3.0SMC100A
3.0SMC110A
3.0SMC120A
3.0SMC130A
3.0SMC150A
3.0SMC180A
3.0SMC200A
3.0SMC220A
3.0SMC6.8CA
3.0SMC7.5CA
3.0SMC8.2CA
3.0SMC9.1CA
3.0SMC10CA
3.0SMC11CA
3.0SMC12CA
3.0SMC13CA
3.0SMC15CA
3.0SMC16CA
3.0SMC18CA
3.0SMC20CA
3.0SMC22CA
3.0SMC24CA
3.0SMC27CA
3.0SMC30CA
3.0SMC33CA
3.0SMC36CA
3.0SMC39CA
3.0SMC43CA
3.0SMC47CA
3.0SMC51CA
3.0SMC56CA
3.0SMC62CA
3.0SMC68CA
3.0SMC75CA
3.0SMC82CA
3.0SMC91CA
3.0SMC100CA
3.0SMC110CA
3.0SMC120CA
3.0SMC130CA
3.0SMC150CA
3.0SMC180CA
3.0SMC200CA
3.0SMC220CA
5.80
6.40
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
11.2
326.1
267.3
250.0
232.6
220.6
164.8
150.8
139.5
123.0
115.4
102.7
92.6
84.5
77.1
71.3
62.0
56.3
51.6
46.5
43.2
41.3
36.4
34.4
31.0
29.1
24.8
20.8
20.6
18.6
16.8
15.6
14.4
12.4
10.3
9.3
800
7.22
8.30
800
200
100
50
5
7.02
7.78
8.95
12.0
12.9
13.6
18.2
19.9
21.5
24.4
26.0
29.2
32.4
35.5
38.9
42.1
48.4
53.3
58.1
64.5
69.4
72.7
82.4
87.1
96.8
103.0
121.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
292.0
324.0
356.0
7.78
8.33
9.58
8.55
9.44
10.82
11.50
12.80
14.00
16.50
17.90
19.20
21.70
23.30
25.50
28.00
33.20
35.80
38.30
42.20
46.00
51.10
54.90
57.50
65.20
74.10
81.80
89.50
99.70
108.20
115.50
128.00
140.50
165.50
192.60
217.50
243.20
9.40
10.00
11.10
12.20
14.40
15.60
16.70
18.90
20.00
22.20
24.40
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
56.70
64.40
71.10
77.80
86.70
94.40
100.00
111.00
122.00
144.00
167.00
189.00
209.00
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
20.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
154.00
171.00
185.00
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
8.4
5
Specifications are subject to change without notice.
Circuit Protection
System
Page:2
Please refer to http://www.ruilon.com for current information.
Transient Voltage Suppressors - 3.0SMC Series
Ratings and Characteristic Curves
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
A
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Derating Curve
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Specifications are subject to change without notice.
Circuit Protection
System
Page:3
Please refer to http://www.ruilon.com for current information.
Transient Voltage Suppressors - 3.0SMC Series
Soldering Parameters
Feflow Condition
Lead-free assembly
- Temperature Min (T
- Temperature Max (T
)
150°C
200°C
s(min)
Pre Heat
)
s(min)
- Time (min to max) (t )
60-180 secs
3°C/second max
3°C/second max
217°C
s
Average ramp up rate (Liquidus Temp (T ) to peak
L
T
to T - Ramp-up Rate
L
S(max)
- Temperature (T ) (Liquidus)
L
Reflow
- Time (min to max) (t )
60-150 seconds
s
+0/-5
°C
Peak Temperature (T
)
P
260
Time within 5°C of actual peak Temperature (t )
20-40 seconds
6°C/second max
8 minutes Max.
280°C
p
Ramp-down Rate
Time 25°C to peak Temperature (T
Do not exceed
)
P
Physical Specifications
tp
TP
one
P
Weight
0.007 ounce, 0.21 grams
Ramp-up
Critical Z
to T
T
L
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Color band denotes cathode except
Bidirectional.
Matte Tin-plated leads, Solderable per
JESD22-B102D
TL
tL
Case
Ts(max)
Polarity
Termina
Ramp-down
Ts(min)
ts
Preheat
Time (t)
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
JESD22-A104
JESD 22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Thermal Shock
Specifications are subject to change without notice.
Circuit Protection
System
Page:4
Please refer to http://www.ruilon.com for current information.
Transient Voltage Suppressors - 3.0SMC Series
Dimensions
Unit:mm
Millimeters
DO-214AB (SMC -Bend)
Inches
DIM
Max
0.126
0.280
0.245
0.103
0.060
0.008
0.320
0.012
-
Min
2.900
6.600
5.590
2.060
0.760
-
Max
3.200
7.110
6.220
2.620
1.520
0.203
8.130
0.305
-
Min
A
B
C
D
E
F
G
H
I
0.114
0.260
0.220
0.079
0.030
-
0.305
0.006
0.129
0.094
-
7.750
0.152
3.300
2.400
-
J
-
-
K
L
0.165
-
4.200
-
0.094
2.400
Warehouse Storage Conditions of Products
· Storage Conditions:
1. Storage Temperature: -10°C~+40°C
2. Relative Humidity:≤75%RH
3. Keep away from corrosive atmosphere and sunlight.
· Period of Storage: 1 year
Specifications are subject to change without notice.
Circuit Protection
System
Page:5
Please refer to http://www.ruilon.com for current information.
RuiLongYuan Electronics Co., Ltd.
· Reproducing and modifying information of the document is prohibited without permission from
Ruilongyuan International Inc.
· Ruilongyuan International Inc. reserves the rights to make changes of the content herein the document anytime
without notification. Please refer to our website for the latest document.
· Ruilongyuan International Inc. disclaims any and all liability arising out of the application or use of any product
including damages incidentally and consequentially occurred.
· Ruilongyuan International Inc. does not assume any and all implied warranties, including warranties of fitness
for particular purpose, non-infringement and merchantability.
· Applications shown on the herein document are examples of standard use and operation. Customers are responsible
in comprehending the suitable use in particular applications.Ruilongyuan International Inc. makes no representation or
warranty that such applications will be suitable for the specifed use without further testing or modifcation.
· The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to
human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation
equipment,aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at
their own risk and agree to fullyindemnify Ruilongyuan International Inc. for any damages resulting from such improper use or
sale.
Tel: +86-755-8290 8296
Fax: +86-755-8290 8002
E-mail: jack@ruilon.com
Specifications are subject to change without notice.
Circuit Protection
System
Page:6
Please refer to http://www.ruilon.com for current information.
相关型号：
©2020 ICPDF网 联系我们和版权申明