BDRA-92SJP-02-12-9999 [SAMTEC]
Cable Assembly;
| 型号： | BDRA-92SJP-02-12-9999 |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly |
| 文件： | 总5页 (文件大小：685K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BDRA-XXXXX-XX-XX-XXXX
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION A
PATENT NUMBER
7,544,093
END 2 CONNECTOR
DO NOT
SCALE FROM
THIS PRINT
-SCC3: PRB3-P-C-XX-ST-CS3(SEE SHEET 3)
-92SJ: 292XX-J-C-XX-ST-CS3 (SEE SHEET 3)
-92SP: 292XX-P-C-XX-ST-CS3 (SEE SHEET 3)
OVERALL CABLE LENGTH (MILLIMETERS)
0100-9999 [3.9 - 393.7]
(SEE NOTE 9 & 10)
END 2 PLATING OPTION
PHASE MATCHED PAIRS
-12
1: GOLD ALL COMPONENTS
6. ALTERNATE H GOLD / H GOLD / NICKEL
9. ALTERNATE HEAVY GOLD/MEDIUM GOLD
P: HEAVY GOLD / PASSIVATED STAINLESS STEEL
(SEE SHEET 2 FOR PLATING SPECIFICS)
(SEE SHEET 2, TABLE 3)
PHASE MATCHING SPEC
-02: 2.0 PICO-SECOND
-05: 5.0 PICO-SECONDS
-10: 10.0 PICO-SECONDS
LENGTH: XXXX
(SEE TABLE 1 FOR TOLERANCE)
C
1
2 (SEE NOTE 2)
12.65 .498 REF
1.28 .050
REF
A01
B01
4.00 .157
REF (TYP)
4.80 .189
REF
49.79 1.960
REF
A12
B12
1.93 .076
REF
3
CABLE ASSEMBLIES NOT
SHOWN FOR CLARITY
52.50±5.00 2.067±.197
15.27 .601 REF
9.5±0.6 .38±.02
(LABEL CUT LENGTH)
FIG 1
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
BDRA-92SP-XX-XX-XXXX SHOWN
Pb
(SEE NOTE 7) 4
NOTES:
25.40±10.00 1.000±.394
C
1.
REPRESENTS A CRITICAL DIMENSION.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
2. USE DRAWING No. BE23S-XXXXX-XX-XX-XXXX FOR CABLE ASSEMBLY INSTRUCTIONS.
3. PARTS TO BE PROCESSED PER SAMTEC WORKMANSHIP GUIDELINES.
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
5
C 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
.X: .3[.01]
.XX: .13[.005]
.XXX: .051[.0020]
6. FOR SUB-ASSEMBLY AND FINISHED GOOD PACKAGING REQUIREMENTS, REFERENCE
SAMTEC PACKAGING STANDARD, LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED.
7. PRINT CABLE POSITION AND "PAT" (3 LINES FOR POSITION, 1 LINE FOR "PAT")
AND APPLY TO CABLES (TAG STYLE) AS SHOWN.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
8. SEE SHEET 2, TABLE 2 FOR PHASE MATCHING REQUIREMENTS.
BULLSEYE DOUBLE ROW, 24 POSITION, ASSEMBLY
DWG. NO.
9. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS.
10. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA.
BDRA-XXXXX-XX-XX-XXXX
BY: EMMA CHEN 3/14/2014
SHEET 1 OF 5
c:\enterprisevault\DWG\MISC\MKTG\BDRA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
REVISION A
PATENT NUMBER
7,544,093
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
BULLSEYE DOUBLE ROW, 24 POSITION, ASSEMBLY
DWG. NO.
BDRA-XXXXX-XX-XX-XXXX
3/14/2014 SHEET 2 OF
5
c:\enterprisevault\DWG\MISC\MKTG\BDRA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
BY: EMMA CHEN
-92SJ
-92SP
REVISION A
PATENT NUMBER
7,544,093
(STRAIGHT JACK)
(STRAIGHT PLUG)
(USE DRAWING No. 292XX-J-C-XX-ST-CS3
FOR ASSEMBLY INSTRUCTIONS)
(USE DRAWING No. 292XX-P-C-XX-ST-CS3
FOR ASSEMBLY INSTRUCTIONS)
-SCC3
(ROUND TIP/STD. FERRULE)
(USE DRAWING No. PRB3-P-C-XX-ST-CS3
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
PLATING OPTIONS
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
6: 30μ" MIN. GOLD CENTER CONTACT
30μ" MIN. GOLD OUTER CONTACT
PLATING
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HH-ST-CS3)
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: PRB3-P-C-HF-ST-CS3)
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HH-ST-CS3)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-P-C-HG-ST-CS3)
9: 30μ" MIN. GOLD CENTER CONTACT
10μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PB-J-C-HG-ST-CS3)
NOTE: ALL CRITICAL DIMENSIONS ON PRB3-P-C-XX-ST-CS3
THAT APPLY MUST BE VERIFIED.
P: 30μ" MIN. GOLD CENTER CONTACT
P: 30μ" MIN. GOLD CENTER CONTACT
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-P-C-HP-ST-CS3)
PASSIVATED STAINLESS STEEL OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: 292PS-J-C-HP-ST-CS3)
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-P-C-XX-ST-CS3
NOTE: ALL CRITICAL DIMENSIONS ON 292XX-J-C-XX-ST-CS3
THAT APPLY MUST BE VERIFIED.
THAT APPLY MUST BE VERIFIED.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
BULLSEYE DOUBLE ROW, 24 POSITION, ASSEMBLY
DWG. NO.
BDRA-XXXXX-XX-XX-XXXX
3/14/2014 SHEET 3 OF
5
c:\enterprisevault\DWG\MISC\MKTG\BDRA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
BY: EMMA CHEN
REVISION A
PATENT NUMBER
7,544,093
INSERTION TOOL
LOCKING COVER
KEYWAYS
POSITION 1 INDICATOR
LOCKING FERRULE
KEYS (2)
APPLY A01 LABEL WITH RESPECT TO
POSITION 1 INDICATOR AS SHOWN
DETAIL 'B'
SCALE 6 : 1
DETAIL 'D'
SCALE 3 : 1
COMPRESSION SPRING
BE23S CABLE ASSEMBLY
7 (INSERTION TOOL)
GROUND FERRULE
DETAIL 'C'
SCALE 4 : 1
TIGHTEN TO 0.5 IN-LBS
1
'C'
CABLE INSTALLATION PROCEDURE:
TARGET PCB
(NOT SUPPLIED)
INSURE LOCKING FERRULE KEYS (SEE DETAIL A) ALIGN WITH KEYWAY
FEATURES IN THE CONNECTOR BODY (SEE DETAIL B). PUSH DOWN
ON THE LOCKING FERRULE (WITH MINIMAL FORCE) USING THE INSERTION
T9O0∶O-9L5.∶TSWTIOSTP TAHNEDINRSEELRETAIOSNE. TTOHOE LLOCCLOKICN GKWFEISRER(UITLSEHWOIULLLDLITFUTRINN TFORETEHLEY)
LOCK CHAMBER, LOCATED INSIDE THE CONNECTOR BODY, BY WAY OF
THE COMPRESSION SPRING. REPEAT THIS PROCESS WITH REMAINING
CABLE ASSEMBLIES .
'B'
REVERSE ABOVE PROCEDURE TO DISASSEMBLE.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
'D'
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
APPLICATION VIEW
DO NOT SCALE DRAWING
SHEET SCALE: 3:2
BULLSEYE DOUBLE ROW, 24 POSITION, ASSEMBLY
DWG. NO.
BDRA-XXXXX-XX-XX-XXXX
EMMA CHEN 3/14/2014 SHEET 4 OF 5
c:\enterprisevault\DWG\MISC\MKTG\BDRA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
BY:
REVISION A
PATENT NUMBER
7,544,093
PACKAGING VIEW
ENDS OF CABLE ASSEMBLY TO BE WRAPPED
IN ANTI-STATIC BUBBLE WRAP
5
6
BDR-GKT-12
(2 PLCS)
(COMPONENTS FROM ITEM 1 / BDR-J-24)
7 (INSERTION/REMOVAL TOOL)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
BULLSEYE DOUBLE ROW, 24 POSITION, ASSEMBLY
DWG. NO.
BDRA-XXXXX-XX-XX-XXXX
3/14/2014 SHEET 5 OF
5
c:\enterprisevault\DWG\MISC\MKTG\BDRA-XXXXX-XX-XX-XXXX-MKT.SLDDRW
BY: EMMA CHEN
相关型号：
©2020 ICPDF网 联系我们和版权申明