CLE-108-01-G-DV [SAMTEC]
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket, ROHS COMPLIANT;
| 型号： | CLE-108-01-G-DV |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket, ROHS COMPLIANT PC 连接器 |
| 文件： | 总2页 (文件大小：196K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AV
PATENT NUMBERS
5713755
CLE-1XX-XX-X-DV-XX
5961339
OPTION
No OF POSITIONS
-04 THRU -90
(PER ROW)
-P: PICK & PLACE PAD (SEE FIG 2, SHT 2)
(AVAILABLE ON POSITIONS -08 THRU -90 ONLY))
(USE LMP-10)
-TR: TAPE & REEL PACKAGING
-A: ALIGNMENT PIN (SEE FIG 3 & 4, SHT 2)
(MOLDED TO POSITION OR STAKED)
(SAMTEC DISCRETION WHICH -A PIN IS USED)
(STAKE 7 POSITIONS MIN)
LEAD STYLE
C
DO NOT
SCALE FROM
THIS PRINT
-01
(No OF POSITIONS x .0315[.800] +.005[.13]) .010[.25]
(SEE NOTE 1 & 4)
(USE C-80-01-X)
PLATING SPECIFICATION
(MOLD 4 POSITION MIN)
-F: 3µ" FLASH SELECTIVE GOLD
ON ENTIRE
-K: POLYIMIDE FILM PAD
.021 0.53 REF
.0315 0.800 REF
(AVAILABLE ON POS. 8 THRU 90 ONLY)
(SEE FIG 5, SHT 2)
"A"
CONTACT
-G: 10µ" LIGHT GOLD ON ENTIRE
CONTACT
(USE K-DOT-.157-.250-.005)
100
02
ROW SPECIFICATION
-D: DOUBLE ROW - VERTICAL
.0472 1.199 REF
.125 3.18 REF
01
(USE CLE-90-D)
'B'
99
"A"
2
MAX SWAY
(ANY DIRECTION)
END WALLS TO BE
SYMMETRICAL .0050
SEE NOTE 8
FIG 1
CLE-90-D
DETAIL 'B'
SCALE 10 : 1
C
+.004
+0.10
.123 3.12 REF
.130
3.30
-0.03
SEE NOTE 6
90°±3°
-.001
.004[.10] POS. 04-65
.006[.15] POS. 66-90
C-80-01-X
.191 4.86
SECTION "A"-"A"
.012 0.30 x .007[.18] REF (TYP)
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. MINIMUM PUSHOUT FORCE: .5 LB.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
4. WILL LOSE TWO POSITIONS FOR EVERY CUT MADE. MAXIMUM CUT FLASH
TO BE .010 [.25] WITH NO FLASH IN HOLES OR EXTENDING BELOW LEADS.
5. NOTE DELETED.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
6. BURR ALLOWANCE: .003 [.08] MAX
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
7. ENDWALL AFTER CUTTING: .0115±.0025 [.292±.064]
8. VOIDS ON TOP SURFACE TO BE LOCATED AT VENDOR DISCRETION
TO CONTROL PART WARPAGE.
e-Mail info@SAMTEC.com
SHEET SCALE: 5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
.8MM x 1.2MM C.L. SOCKET STRIP ASSEMBLY
DWG. NO.
CONTACT: BeCu 190 ALLOY [TM04]
THICKNESS: .007[.18]REF
CLE-1XX-XX-X-DV-XX
SHEET 1 OF 2
BY:
PURVIS
10/23/95
F:\DWG\MISC\MKTG\CLE-1XX-XX-X-DV-XX-MKT.SLDDRW
FIG 5
REVISION AV
-K: POLYIMIDE FILM PAD
8 POSITIONS MIN
"R"
(SEE NOTE)
.125 3.18 REF
"S"
.016±.010 0.41±0.25
(SEE NOTE)
FIG 2
C
L
-P OPTION
8 POSITIONS MIN
C
[P=((M -.225) / 2)] .015
.173 4.39
LMP-10
.1570±.0050 3.988±0.127
.123 3.12
REF
.135 3.43
.138 3.51
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = [( "R" - .1575 [4.00]) / 2] .020[.51]
.225 5.72 REF
"M"
.130 3.30
.028 0.71 REF
C
CLE-90-D-XX
(No. OF POS. - 2) x .0315[.800]
.028 0.71 (TYP)
.025 0.64
(No. OF POS. - 2) x .0315[.800]
.035 0.89
C
L
FULL RADIUS
-A: ALIGNMENT PIN OPTION
SM-A7H FOR STAKED VERSION
.007 0.18
FIG 3
.025 0.64 REF
.007 0.18
-A STAKED OPTION
7 POSITIONS MIN
FIG 4
PACKAGING VIEW
-A OPTION (MOLDED)
4 POSITIONS MIN
PROPRIETARY NOTE
PT-1-24-03-43
TP-24
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
PT-1-24-01-62
TP-12
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
.8MM x 1.2MM C.L. SOCKET STRIP ASSEMBLY
DWG. NO.
CLE-1XX-XX-X-DV-XX
ALL OTHER POSITIONS AND OPTIONS
FOR CLE-104/105-01-X-DV &
CLE-104/105-01-X-DV-A
F:\DWG\MISC\MKTG\CLE-1XX-XX-X-DV-XX-MKT.SLDDRW
BY:
PURVIS
10/23/95
SHEET 2 OF 2
相关型号：
CLE-108-01-G-DV-A
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket,
SAMTEC
CLE-108-01-G-DV-A-K
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLE-108-01-G-DV-A-K-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLE-108-01-G-DV-A-P
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug,
SAMTEC
CLE-108-01-G-DV-A-P-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug,
SAMTEC
CLE-108-01-G-DV-A-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLE-108-01-G-DV-K
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket,
SAMTEC
CLE-108-01-G-DV-K-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug,
SAMTEC
CLE-108-01-G-DV-P
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket
SAMTEC
CLE-108-01-G-DV-P-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug,
SAMTEC
CLE-108-01-G-DV-TR
Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Socket
SAMTEC
©2020 ICPDF网 联系我们和版权申明