CLM-147-02-H-D-BE [SAMTEC]
Board Connector;
| 型号： | CLM-147-02-H-D-BE |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector |
| 文件： | 总2页 (文件大小：228K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION BF
CLM-1XX-XX-XX-D-XX
OPTION
-P: PICK & PLACE PAD
No OF POSITIONS / ROW
DO NOT
SCALE FROM
THIS PRINT
-02 THRU -50
(AVAILABLE ON POS 7 THRU 50 ONLY)
(SEE FIG 3, SHT 2)(USE LMP-04)
-TR: TAPE & REEL
LEAD STYLE SPEC
-02: SURFACE MOUNT
(USE C-117-01-X)
-BE: BOTTOM ENTRY ONLY
(SEE FIG 2)(USE CLM-XX-DBE-XX)
-PA: PICK & PLACE PAD W/ ALIGNMENT PINS
(SEE FIG 4, SHT 2)
FIG 2
(SAME AS FIG 1 EXCEPT INSULATOR)
PLATING SPECIFICATION
-A: ALIGNMENT PIN (USE CLM-XX-D-XX)
(AVAILABLE ON POS 3 THRU 50 ONLY)
(SEE FIG 5, SHT 2)
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
-K: POLYIMIDE FILM PAD
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(AVAILABLE ON POS 7 THRU 50 ONLY)
(.005 [.13] THICKNESS)(SEE FIG 6, SHT 2)
(USE K-DOT-.138-.250-.005)
(No OF POS. X .03937[1.0000] + .0125[.318]) .008
(SEE NOTE 3 AND 7)
(PRE-PLATED CONTACT)
C
-G: 10µ" GOLD IN CONTACT AREA 3µ" ON TAIL
(POST-PLATED CONTACT)
(SEE NOTE 8)
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
C-117-01-X
BODY SPEC
-D: DOUBLE ROW
(USE CLM-XX-D)
C
L
(POST-PLATED CONTACT)
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
.0394 1.000
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(PRE-PLATED CONTACT)
.1000 2.540
.0110 0.279 x .0050[.127] REF
REF
No. OF POS x .03937[1.0000] - .03937[1.0000]
REF
C-117-01-X
2
MAX SWAY
(ANY DIRECTION)
"A"
"A"
C
.0885 2.248
(MEASURED AT BEND)
.0835 2.121 REF
C
SEE NOTE 9
0°±3°
C
FIG 1
.150±.010 3.81±0.254
(SEE NOTE 5)
BURR SIDE (SEE NOTE 5)
SECTION "A"-"A"
SCALE 4 : 1
NOTES:
C
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
1.
REPRESENTS CRITICAL DIMENSION.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
2. MINIMUM PUSHOUT FORCE: .5 LB.
3. WILL LOSE A POSITION FOR EVERY CUT MADE ON
A SOCKET STRIP.
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
4. POSITIONS -05 THROUGH -50 ARE TO BE TUBED. POSITIONS
-02 THRU -04 TO BE LAYER PACKAGED ONLY.
5. SHEAR TAILS TO DIMENSIONS SHOWN, .003 MAX SHEAR BURR.
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
C
6. PARTS TO BE SYMMETRICAL ABOUT
.
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
L
7. CUT FLASH TO BE .010 [.25] MAX WITH
NO FLASH ALLOWED IN HOLES OR
EXTENDING BELOW LEADS.
BODY: LCP, UL 94 VO
COLOR: BLACK
LOW PROFILE 1MM x 1MM DOUBLE ROW BODY
DWG. NO.
TERMINAL:
PHOS BRONZE
CLM-1XX-XX-XX-D-XX
8. ENDWALL AFTER CUTTING: .0155±.0025 [.398±.064]
9. COPLANARITY TO BE .0040 FOR POSITIONS 2-25
& .0060 FOR POSITIONS 26-50.
SHEET 1 OF 2
BY:
G. PURVIS 08/10/94
F:\DWG\MISC\MKTG\CLM-1XX-XX-XX-D-XX-MKT.SLDDRW
REVISION BF
FIG 5
-A: MOLDED ALIGNMENT PIN
-PACKAGING
(SEE NOTE 4)
FIG 3
-P: PICK & PLACE PAD
AVAILABLE ON POSITIONS 7 THRU 50 ONLY
TABLE 2
(INCLUDES -D & -D-BE)
"N"
.0966 2.454
.225 5.72
REF
OPTION
TUBE
PLUG
C
L
-P, -A-P
-PA
PT-CLX001-D
TP-33
PT-CLP001-PA TP-09
-NONE
-A, -A-K, PT-1-24-01-50
-K
.144 3.66
REF
TP-33
.020 0.51 REF
(No OF POS. -2) x .03937 [1.0000]
.015 0.38 REF
.020 0.51
LMP-04
"Q"
NOTE: "N" = USED MEASURED DIMENSION (REF)
"Q" = {("N" - .225[5.72]) / 2} .020[.51]
FIG 4
FIG 6
-PA: PICK & PLACE PAD WITH ALIGNMENT PINS
-K: POLYAMIDE FILM PAD
AVAILABLE ON POSITIONS 7 THRU 50 ONLY
PT-CLX001-D
.1185 3.010
.0535 1.359
"M"
"A"
REF
C
"R"
.035 0.89
(TYP)
"P"
C
L
"S"
.019±.010 0.48±0.25
.325 8.26
REF
C
C
L
.275 6.99
L
PT-CLP001-PA
.0935 2.375 REF
.138 3.50
PPP-39-X-X-XX
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .138[3.50]) / 2} .020[.51]
TABLE 1
"M"
POS / ROW
"A"
"P"
PT-1-24-01-50
4-15
16-50
.140[3.58] REF
.280[7.11] REF
USED MEASURED DIMENSION(REF)
{("M" - "A") / 2} .010[.25]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
TABLE 3
POSITIONS
PAD
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
4-14
16-50
PPP-39-E-4-15
PPP-39-E-16-50
PPP-39-O-4-15
PPP-39-0-16-50
code 55322
EVEN
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
5-15
LOW PROFILE 1MM x 1MM DOUBLE ROW BODY
DWG. NO.
ODD
17-49
CLM-1XX-XX-XX-D-XX
SHEET 2 OF 2
F:\DWG\MISC\MKTG\CLM-1XX-XX-XX-D-XX-MKT.SLDDRW
BY:
G. PURVIS 08/10/94
相关型号：
CLM-147-02-L-D-BE-K-PA
Board Connector, 94 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLM-147-02-L-D-BE-P-PA-TR
Board Connector, 94 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLM-147-02-L-D-K-PA-TR
Board Connector, 94 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
CLM-148-02-F-D-A
Board Connector, 96 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,
SAMTEC
CLM-148-02-F-D-K-PA
Board Connector, 96 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
©2020 ICPDF网 联系我们和版权申明