CLT-106-02-LM-D-A-K-TR [SAMTEC]
Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,;
| 型号： | CLT-106-02-LM-D-A-K-TR |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, 连接器 |
| 文件： | 总2页 (文件大小：282K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION BR
CLT-1XX-02-XX-D-XX
OPTION
No OF POS. PER ROW
DO NOT
SCALE FROM
THIS PRINT
-P: PICK & PLACE PAD
-02 THRU -50
AVAILABLE ON POSITIONS
04 THRU 50 ONLY
LEAD STYLE
-02: SURFACE MOUNT
(SEE TABLE 1)
(SEE FIG. 2, SHT 2. USE LMP-03)
-TR: TAPE AND REEL PACKAGING
(02 THRU 36 POS ONLY)
FIG 6
(SEE NOTE 11)
-BE: BOTTOM ENTRY
PLATING SPECIFICATION
-BE OPTION
(SEE FIG. 6, USE CLT-XX-D-BE-XX)
-A: ALIGNMENT PIN (MOLDED OR STAKED)
(SEE FIGS. 3 & 4, SHT 2)
-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
(SAME AS FIG 1 EXCEPT INSULATOR)
CONTACT, MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
(STAKED MIN 5 POS)
(MOLDED MIN 3 POS)
C
-G: GOLD, 10 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-S: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-K: POLYIMIDE FILM PAD
(NO. OF POS. x .0787[2.00]) .005[.13]
(CUT TO POSITION) SEE NOTE 4, 9, 10
SEE TABLE 1
(AVAILABLE ON POS. 4 THRU 50 ONLY)
(.005 [.13] THICKNESS WITH SILICONE
ADHESIVE)(SEE FIG 5, SHT 2)
(USE K-500-300)
(NO. OF POS x .07874[2.00]) - .07874[2.00] REF
.1575 4.00 REF
.07874 2.00 REF
(USE C-114-22-S ONLY)
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
"A"
ROW SPEC.
-D DOUBLE ROW
(USE CLT-XX-D EXCEPT
FOR -BE OPTION)
-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
C
L
"A"
(SEE NOTE 10)
2.5 MAX SWAY
BURR SIDE (SEE NOTE 8)
(ANY DIRECTION)
.0200 0.51 x .0050[.127] REF
.024 0.61 SQ REF
C
L
C
.0835 2.12
REF
.090±.002 2.27±0.05
(MEASURE AT BEND)
+4
C
SEE NOTE 2
-3
FIG 1
.203±.010 5.15±0.25
(SEE NOTE 6)
CLT-XX-D-XX
SECTION "A"-"A"
SCALE 4 : 1
PACKAGING VIEWS
PATENT NUMBERS
5713755
(SEE NOTE 5)
PT-CLX002-D
5961339
USE TP-12 PLUGS
NOTES:
1.
C REPRESENTS A CRITICAL DIMENSION.
-P OPTION W/O -A OPTION
SEE NOTE 11
2. COPLANARITY TO BE .004 FOR POSITIONS 2-25,
.006 FOR POSITIONS 26-34, AND .008 FOR 35-50.
3. MINIMUM PUSHOUT FORCE: .5 LB.
ALL OPTIONS EXCEPT -P
OPTION W/O -A OPTION
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
4. WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP.
5. ALL OPTIONS:PACKAGE POSITIONS -04 THRU -50 IN
PT-CLX002-D TUBE AS SHOWN IN VIEWS, WITH TWO TP-12 PLUGS
PER TUBE. LAYER PACKAGE POSITIONS -02 & -03.
6. SHEAR TAILS TO DIMENSION SHOWN.
POSITIONS 04 - 50
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
10
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
C
7. PARTS TO BE SYMMETRICAL ABOUT
8. .005 MAX. BURR.
L
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
9. CUT FLASH TO BE .010 [.25] MAX WITH NO FLASH
ALLOWED IN HOLES OR EXTENDING BELOW LEADS
BR 10. STANDARD BODY ENDWALL AFTER CUTTING: .0215 MIN.
11. -BE BODY ENDWALL AFTER CUTTING: .0169 .003 [.429 .08]
12. C-114-02 CAN BE USED FOR C-114-22.
2MM LOW PROFILE SOCKET STRIP
INSULATOR: LCP, UL 94 VO, COLOR BLACK
CONTACT: PHOS BRONZE
DWG. NO.
CLT-1XX-02-XX-D-XX
BRATCHER 10/03/1994 SHEET 1 OF 2
BY:
F:\DWG\MISC\MKTG\CLT-1XX-02-XX-D-XX-MKT.SLDDRW
FIG 2
REVISION BR
-P: PICK & PLACE PAD
(4 POS MIN)
"M"
(SEE NOTE)
C
C
"P"
(SEE NOTE)
.202 5.13 REF
LMP-03
.225 5.72
.020±.010 0.50±0.25
C
C
L
L
.098 2.48
C
L
.095 2.400
.1969±.0050 5.001±0.127
C
C
.030 0.76 REF
.035 0.89
((NO. OF POS -2) x .0787[2.00]) .005
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = (("M" - .1969 [5.00]) / 2) .020 [.51]
SM-A7H
FIG 5
-K OPTION
(4 POS MIN)
C
L
.025 0.64 REF
FIG 3
-A OPTION (STAKED)
(5 POS MIN)
2
MAX TOE
CLT-XX-D(-BE*)
(ANY DIRECTION)
= FOR -BE OPTION ONLY
*
CLT-XX-D(-BE*)
.025 0.64 REF
.0235 0.597 REF
PROPRIETARY NOTE
(No. OF POS. - 2) x .0787[2.00] REF
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
= FOR -BE OPTION ONLY
FIG 4
*
-A OPTION (MOLDED)
(3 POS MIN)
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
2MM LOW PROFILE SOCKET STRIP
DWG. NO.
CLT-1XX-02-XX-D-XX
BRATCHER 10/03/1994 SHEET 2 OF 2
F:\DWG\MISC\MKTG\CLT-1XX-02-XX-D-XX-MKT.SLDDRW
BY:
相关型号：
CLT-106-02-LM-D-BE-K
Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle
SAMTEC
CLT-106-02-LM-D-BE-K-TR
Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle
SAMTEC
©2020 ICPDF网 联系我们和版权申明