首页 |元器件品牌

EHT-105-01-H-D-SM-P [SAMTEC]

Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Latch & Eject, Black Insulator;
EHT-105-01-H-D-SM-P
型号： EHT-105-01-H-D-SM-P
厂家： SAMTEC    SAMTEC
描述：

Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Latch & Eject, Black Insulator
文件： 总3页 (文件大小：280K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
EHT-1XX-01-XX-D-XX-XX-X-XX-XX  
REVISION BB  
OPTION 3  
No OF POSITIONS  
-TR: TAPE AND REEL PACKAGING  
(FOR -SM, -SM-P, AND -SM-K ONLY)  
DO NOT  
SCALE FROM  
THIS PRINT  
-05 THRU -25  
LEAD STYLE  
-01  
PLATING SPECIFICATION  
OPTION 2  
-LC: LOCKING CLIP(SEE NOTE 4)  
( FOR -SM ONLY)  
(SEE FIG 4, SHT 2, USE LC-09-TM)  
.311 7.90  
REF  
-S: 30µ" GOLD IN CONTACT AREA,  
OPTION 1  
MATTE TIN ON TAIL.  
-P: PICK & PLACE PAD (SEE FIG 5, SHT 2)  
(FOR -SM ONLY, USE PPP-24)  
(USE PPP-55 WITH -SM-TR OPTION)  
-K: OPTION (POLYIMIDE FILM, SEE FIG 3, SHT 2)  
(FOR -SM ONLY)  
-F: 3µ" GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL.  
.100 2.54  
REF  
.300 7.62  
-T: MATTE TIN.  
-H: 30µ" GOLD IN CONTACT AREA,  
3µ" GOLD ON TAIL.  
.1775 4.509 REF  
REF  
-L: 10µ" GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL.  
POLARIZED OPTION  
-XX = PIN OMITTED  
02  
01  
-SM: 30µ" GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL.  
TAIL OPTION  
-RA: RIGHT ANGLE (FIG 2, SHT 2)  
-SM: SURFACE MOUNT (SEE FIG 4, SHT 2)  
(LEAVE BLANK FOR THRU HOLE)  
-FM: 3µ" GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL.  
C
.0787 2.000  
L
-TM: MATTE TIN.  
"A"  
"A"  
-LM: 10µ" GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL.  
ROW SPECIFICATION  
-D: DOUBLE  
.020 0.51  
REF  
C
No OF POS x .0787[2.000] + .543[13.79] REF  
No OF POS x .0787[2.000] + .177[4.50] REF  
(No OF POS x .0787[2.000]) - .0787[2.000] ±.005[0.13]  
POLARIZATION  
WINDOW  
FIG1  
(EHT-105-01-XX-D SHOWN)  
(LATCH EHA-01 REMOVED FOR CLARITY)  
.020 0.50 SQ  
REF (TYP)  
POS 1 INDICATOR  
EHH-XX-D  
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE  
.120 3.04  
REF  
ASSEMBLY OPERATION  
IN-PROCESS INSPECTION  
.370 9.40  
REF  
FILL T-1S13-05-XXX-2-TH  
FORM T-1S13-06-XXX-2-SM  
FORM T-1S13-15-XXX-2-SM  
FORM T-1S13-05-XXX-2-SM  
REPRESS T-1S13-05-XXX-2-SM  
C1, C2  
C5  
C
.114 2.90  
C7  
2
MAX SWAY  
C4  
2
MAX SWAY  
T-1S13-05-XXX-2  
(SEE TABLE 2)  
(EITHER DIRECTION)  
(EITHER DIRECTION)  
C3, C6  
SECTION "A"-"A"  
SCALE 2.5 : 1  
PROPRIETARY NOTE  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
TOLERANCES ARE:  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
DECIMALS  
ANGLES  
2
.XX: .01 [0.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
.XXX: .005 [0.13]  
NOTES:  
.XXXX: .0020 [0.051]  
C
1.  
REPRESENTS A CRITICAL DIMENSION.  
SHEET SCALE: 2:1  
MATERIAL:  
DO NOT SCALE DRAWING  
DESCRIPTION:  
2. MINIMUM PUSHOUT FORCE: 1 LB.  
INSULATOR: LCP, UL 94 VO, COLOR: BLACK  
TERMINAL: PHOS BRONZE  
2MM EJECTOR HEADER ASSEMBLY  
3. MAXIMUM PIN ROTATION IN BODY: 2°  
DWG. NO.  
4.DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,  
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.  
EHT-1XX-01-XX-D-XX-XX-X-XX-XX  
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.  
F:\DWG\MISC\MKTG\EHT-1XX-01-XX-D-XX-XX-X-XX-XX-MKT.SLDDRW  
BY:  
PURVIS  
02/28/1994 SHEET 1 OF 3  
"S"  
REVISION BB  
.2953±.005 7.501±0.127  
(SEE NOTE)  
.120 3.05  
REF  
POLARIZATION  
WINDOW  
"R"  
(SEE NOTE)  
90°  
NOTE: "R" = USE MEASURED DIMENSION (REF)  
"S" = {("R" -.2953[7.50]/2) ±.020[0.51]}  
FIG 3  
.272 6.92  
C
(EHT-105-01-XX-D-SM-K SHOWN)  
-K OPTION (POLYIMIDE FILM PAD)  
T-1S13-06-XX-2  
T-1S13-15-XX-2  
.431 10.95  
.060±.010 1.52±0.254  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
C
.0787±.0050 2.000±0.127  
NOTE: "R" = USE MEASURED DIMENSION (REF)  
"S" = {("R" -.325[8.26]/2) ±.020[0.51]}  
FIG 2  
(EHT-1XX-01-XX-D-RA SHOWN)  
RIGHT ANGLE  
-RA IN PROCESS  
.325 8.26  
REF  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
.237 6.03  
REF  
90°  
.079 2.01  
"R"  
(SEE NOTE)  
.190±.0025 4.84±0.064  
"S"  
.350±.010 8.90±0.254  
(SEE NOTE)  
C
PPP-24  
T-1S13-05-XX-2  
-SM IN-PROCESS 2  
-SM IN-PROCESS 1  
.338 8.59  
PIN TO BE FLUSH OR BELOW  
LINE FORMED BY BODY  
(LATCH EHA-01 REMOVED FOR CLARITY)  
90°  
FIG 5  
(EHT-105-01-XX-D-SM-P SHOWN)  
PICK AND PLACE PAD  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
C
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
.375 9.52  
C
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
.004[0.10]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
.060 1.52  
LC-09-TM  
C
.350±.010 8.89±0.254  
DO NOT SCALE DRAWING  
SHEET SCALE: 1:0.571429  
2MM EJECTOR HEADER ASSEMBLY  
DWG. NO.  
FIG 4  
(EHT-105-01-XX-D-SM-LC SHOWN)  
SURFACE MOUNT VERSION  
EHT-1XX-01-XX-D-XX-XX-X-XX-XX  
F:\DWG\MISC\MKTG\EHT-1XX-01-XX-D-XX-XX-X-XX-XX-MKT.SLDDRW  
BY:  
PURVIS  
02/28/1994 SHEET 2 OF 3  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(NO OF POS -1) X .079[2.00] + .900[22.86]  
REF  
REVISION BB  
.343 8.70  
REF  
.526 13.36  
FIG 6  
APPLICATION VIEW  
IN-PROCESS  
ARM ASSEMBLY & ROTATION  
EHT MATED TO TCSD AND ECF  
POSITION 1  
PPP-55  
"B"  
"B"  
POLARIZATION  
NOTCH  
SM W/ LC  
USER DIRECTION OF UN-REELING  
POCKET NOT DETAILED  
SM W/O LC  
SECTION "B"-"B"  
SCALE 1 : 1  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
FIG 7  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733  
FAX: 812-948-5047  
code: 55322  
PACKAGING VIEWS  
e-Mail: info@SAMTEC.com  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
2MM EJECTOR HEADER ASSEMBLY  
DWG. NO.  
EHT-1XX-01-XX-D-XX-XX-X-XX-XX  
F:\DWG\MISC\MKTG\EHT-1XX-01-XX-D-XX-XX-X-XX-XX-MKT.SLDDRW  
BY:  
PURVIS  
02/28/1994 SHEET 3 OF 3  

相关型号：

EHT-105-01-H-D-SM-SR-LC

 Board Connector
SAMTEC

EHT-105-01-L-D

 CONN HEADER .787" 10POS DUAL
SAMTEC

EHT-105-01-L-D-RA-01-SR

 Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
SAMTEC

EHT-105-01-L-D-SM-10

 Board Connector
SAMTEC

EHT-105-01-L-D-SM-K-01

 Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Latch & Eject, Black Insulator
SAMTEC

EHT-105-01-L-D-SM-LC

 Board Connector
SAMTEC

EHT-105-01-L-D-SM-SR-K-TR

 Board Connector
SAMTEC

EHT-105-01-LM-D-SM

 Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Surface Mount Terminal, Latch & Eject, Black Insulator,
SAMTEC

EHT-105-01-S-D

 Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC

EHT-105-01-S-D-05

 Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, Receptacle
SAMTEC

EHT-105-01-S-D-RA

 Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC

EHT-105-01-S-D-SM

 CONN HEADER 2MM 10POS SMD GOLD
SAMTEC
©2020 ICPDF网 联系我们和版权申明