ERF8-010-03-L-D-RA [SAMTEC]
Board Stacking Connector;
| 型号： | ERF8-010-03-L-D-RA |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector |
| 文件： | 总6页 (文件大小：1008K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION Y
ERF8-XXX-XX-X-D-RA-XXX-TR
DESIGNED & DIMENSIONED IN MILLIMETERS [INCHES]
OPTION
No OF POSITIONS (PER ROW)
"A" REF
-TR: TAPE & REEL
-010, -011, -013, -020, -025, -030, -037
-040,-049, -050, **-053, -060, -070, -075,
**-053 MATES WITH ERCDA
5.75 .226 REF
(TYP)
(STANDARD PACKAGING)
(SEE NOTE 4)
DO NOT
SCALE FROM
THIS PRINT
OPTION
LEAD STYLE
-01: 1.58 [.062] BOARD
-03: 2.36 [.093] BOARD
-L: LATCHES (SEE FIG 2, SHT 2)
-EGP: EXTENDED GUIDE POSTS
(NOT AVAILABLE WITH -L OPTION)
(SEE NOTE 9)
11.35 .447
8.7 .34
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-RA: RIGHT ANGLE
(USE C-231-02-S, C-231-03-S)
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
ROW SPECIFICATION
-D: DOUBLE (USE ERF8-XXX-01-D-RA)
"K" REF
(USE C-231-02-L, C-231-03-L)
** NOT RELEASED FOR PRODUCTION
"C" 0.25
(SEE DETAIL 'B')
ERF8-XXX-01-D-RA
2.50 .098
REF
"B"
C
'B'
PIN 60
0.80 .031
REF
PIN 02
"A"
WT-33-XX-F
(SEE TABLE 4, SHT 2)
6.25 .246
REF
6.12 .241
REF
C
PIN 01
WT-33-XX-X
(SEE TABLE 4,
SHT2)
"H"
C
"A"
C
(SEE NOTE 11)
"J"
PIN 59
0.800 .0315
(TOL NON-ACCUM)
0.35 .014
REF
1.00 .039 REF
1.57 .062 REF
0.25 .010 REF
C
"D"
FIG 1
"E" REF (ALIGNMENT PIN CTRS.)
01
ERF8-030-01-X-D-RA SHOWN
59
60
NOTES:
4.00 .157 REF
C
1.
REPRESENTS A CRITICAL DIMENSION.
8.35 .329
REF
2. MAXIMUM BURR ALLOWANCE: 0.02[.001]
3. MINIMUM PUSHOUT /PULLOUT FORCE: SIGNAL: 2.22 N[.5 LB.],
LATCH AND COUNTERWEIGHT: 4.45 N [1.0 LB.]
4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR
EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITIES FROM 50-124
PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
5. MEASURE AT BEND TANGENCY.
1.32 .052 REF
1.32 .052
REF
"C"
REF
02
6. MEASURED ON PINS ONLY, INSULATOR NOT INCLUDED IN
MEASUREMENT.
C
0.800 .0315
C
(TOL NON-ACCUM)
7. ALL DIMENSIONS SYMMETRIC ABOUT
8. DELETED
EXCEPT AS SHOWN.
L
1.10 .043 REF
C
9. BOTH NON AND -EGP OPTION PARTS ARE IDENTICAL, THUS
INTERCHANGEABLE
"B"
DETAIL 'B'
SCALE 5 : 1
10. DIMENSIONS MUST BE MEASURED BOTH ENDS OF COMB OR
CONNECTOR.
C
11. USE -Z- DATUM ZONE FOR MEASUREMENTS ONLY.
12. SEE PTL SYSTEM FOR REQUIRED INSPECTION FIXTURE TO CHECK TAIL
CRITICALS.
"F"
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MILLIMETERS [INCHES].
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
.X: 0.3 [.01]
.XX: 0.13 [.005]
.XXX: 0.050 [.0020]
ANGLES
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP UL94V-0, COLOR BLACK
CONTACTS: BeCu
COUNTERWEIGHT: BRASS
LATCHES: BeCu
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
DWG. NO.
ERF8-XXX-XX-X-D-RA-XXX-TR
BY:
D BOYCE
08-10-2010 SHEET 1 OF 6
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
REVISION Y
WT-33-XX-X
(SEE TABLE 4)
WT-33-XX-X
(SEE TABLE 4)
C
"G" 0.25
FIG 2
ERF8-030-01-X-D-RA-L SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
**NOT RELEASED FOR PRODUCTION
7.95 .313
3.70 .146 REF
T-1R37-XX-T
(SEE TABLE 4)
1.22 .048 REF
ERF8-RA-XXX
C-231-02-X
'J'
'K'
C
2.58±0.12 .101±.005
C
3.55 .140 REF
0.10±0.08 .004±.003
(SEE NOTE 5 & 11)
C-231-03-X
C
WT-33-XX-X
(SEE TABLE 4)
DETAIL 'J'
BOTTOM ROW TAIL
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
SEE TABLE 2
TOP ROW, BOTTOM ROW
(LOCATE ASSY ON DATUM -C- FOR MEASURMENT)
0.35 .014 (REF)
C
C
2.22 .087
0.90±0.08 .036±.003 (TYP)
0.10±0.08 .004±.003
(SEE NOTE 5 & 11)
C
C
6.95±0.12 .274±.005
DETAIL 'K'
TOP ROW TAIL
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
C
8.35 .329
C
L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
C
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
8.70±0.12 .34±.005
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
-C-
SECTION "A"-"A"
SCALE 8 : 1
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 6:1
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
DWG. NO.
ERF8-XXX-XX-X-D-RA-XXX-TR
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
BY:
D BOYCE
SHEET 2 OF 6
08-10-2010
2.30 .091
SKEW DATUM
POINT FOR C25
REVISION Y
0.70 .028
SKEW MEASUREMENT
POINT FOR C25
C
R0.35 .014
-D-
1.351 .0532
(SEE NOTE 10)
E2
E1
-E-
0.35 .014
MEASUREMENT
LOCATION FOR C18
0.50 .020
MEASUREMENT
LOCATION FOR C25
D1
D2
+0°
-3°
90°
(SEE NOTE 10)
C
+0°
-3°
90°
C
3.051 .1201
(SEE NOTE 10)
0.70 .028
SKEW MEASUREMENT
POINT FOR C18/
C
R0.35 .014
0.55 .022
SKEW DATUM
POINT FOR C18
0.25±0.08 .010±.003
(BOTH ENDS)
IN-PROCESS 8
(FORM 1 CONTACT C-231-02-X)
C
IN-PROCESS 2
"L" REF
(FORM 1 CONTACT C-231-03-X)
C
0.70 .028
SKEW MEASUREMENT
POINT FOR C28
+0°
-3°
90°
E1
(SEE NOTE 11)
+2°
-1°
C
2°
(SEE NOTE 10)
R0.35 .014
2.30 .091
SKEW DATUM
POINT FOR C28
0.70 .028
SKEW MEASUREMENT
POINT FOR C21
3.051 .1201
(SEE NOTE 11)
C
E2
D1
1.351 .0532
(SEE NOTE 10)
RC0.35 .014
C
0.50 .020
MEASUREMENT
LOCATION FOR C25
5.545 .2183
(SEE NOTE 4 & 11)
C
D2
0.55 .022
-E-
SKEW DATUM
POINT FOR C21
1.70±0.10 .067±.004
(SEE NOTE 10)
C
C
2°+-12°° (SEE NOTE 11)
R0.35 .014
(2 PLCS)
IN PROCESS 1 & 7
(COMB CUT CONTACT
C-231-03-X & C-231-02-X)
IN PROCESS-9
0.35 .014
MEASUREMENT
LOCATION FOR C18
(FORM 2 CONTACT C-231-02-X)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
C
1.555 .0612
(SEE NOTE 5 & 10)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
-D-
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
NO.
DWG. ERF8-XXX-XX-X-D-RA-XXX-TR
IN-PROCESS 3
(FORM 2 CONTACT C-231-03-X)
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
BY:
D BOYCE
08-10-2010 SHEET 3 OF 6
REVISION Y
SHEAR CARRIER
C-231-03-X
SEE TABLE 2, SHT 2
0.90 .036 REF
0.10 .004 REF
0.10 .004 REF
6.95 .274 REF
6.05 .238 REF
-C-
-C-
IN-PROCESS 5
IN-PROCESS 4
(CUTOFF OF CARRIER)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTATION AND CPC'S)
(FILL BOTTOM ROW)
(SEE INSPECTION VIEW 1 FOR ASSEMBLY ORIENTATION AND CPC'S)
INSPECTION VIEW 1
(SEE NOTE 12)
Z2
Z1
-C-
ERF8-RA-XXX
C
C
6.95±0.10 .274±.004
(SEE NOTE 10)
0.65 .026
REF
6.05±0.08 .238±.003
(SEE NOTE 10)
0.90±0.08 .036±.003
(SEE NOTE 10)
C
7.80 .307
Z2
Z1
C
C
SEE TABLE 2, SHT 2
-C-
C
0.10±0.08 .004±.003
(SEE NOTE 5,10 & 11)
IN-PROCESS 6
C
(FILL ERF8-RA-XXX)
0.10±0.08 .004±.003
(SEE NOTE 5,10 & 11)
DETAIL 'C'
SCALE 8 : 1
DETAIL 'D'
SCALE 8 : 1
'D'
'C'
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
DWG. ERF8-XXX-XX-X-D-RA-XXX-TR
INSPECTION FOR IN-PROCESS 4 & 5
NO.
(CARRIER NOT SHOWN FOR IN PROCESS 4 INSPECTIONS)
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
BY:
D BOYCE
08-10-2010 SHEET 4 OF 6
REVISION Y
C-231-02-X
HEAT STAKE
TOP ROW TAILS
C
0.00
+.000
-.010
2.58-0.25 .101
C
0.10 .004 REF
0.10 .004 REF
7.80 .307 REF
7.80 .307 REF
-C-
-C-
IN-PROCESS 11
IN-PROCESS 10
(HEAT STAKE TOP ROW CONTACTS)
(FILL TOP ROW)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTATION AND CPC'S)
(SEE INSPECTION VIEW 2 FOR ASSEMBLY ORIENTATION AND CPC'S)
INSPECTION VIEW 2
(SEE NOTE 12)
Z2
Z1
-C-
C
SHEAR CARRIER
7.80±0.08 .307±.003
(SEE NOTE 10)
C
8.70±0.10 .343±.004
(SEE NOTE 10)
SEE TABLE 2, SHT 2
+0.04
-0.02
+.002
.011
-.001
0.28
0.10 .004
REF
C
0.90 .036 REF
8.70 .343 REF
0.90±0.08 .036±.003
(SEE NOTE 10)
C
C
0.14±0.14 .006±.006
Z2
Z1
C
-C-
SEE TABLE 2, SHT 2
0.10±0.08 .004±.003
(SEE NOTE 5, 10 & 11)
C
C
0.10±0.08 .004±.003
(SEE NOTE 5,10 & 11)
DETAIL 'E'
SCALE 8 : 1
DETAIL 'F'
SCALE 8 : 1
'E'
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
'F'
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
NO.
DWG. ERF8-XXX-XX-X-D-RA-XXX-TR
INSPECTION FOR IN-PROCESS 10, 11 & 12
(CARRIER NOT SHOWN FOR IN PROCESS 10 & 11 INSPECTIONS)
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
BY:
D BOYCE
08-10-2010 SHEET 5 OF 6
REVISION Y
WT-33-XX-X
(SEE TABLE 4, SHT 2)
2.22 .087
C
"H" REF
C
C
"H"
(SEE NOTE 11)
"H"
(SEE NOTE 11)
2.22 .087 REF
DETAIL 'G'
SCALE 8 : 1
DETAIL 'H'
SCALE 8 : 1
'G'
'H'
IN-PROCESS 13
(FILL WT-33-XX-X)
T-1R37-XX-T
(SEE TABLE 4, SHT 2)
IN-PROCESS 14
"J"
(FILL T-1R37-XX-T)
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
0.8mm DUAL ROW RIGHT ANGLE SOCKET ASSEMBLY
NO.
DWG. ERF8-XXX-XX-X-D-RA-XXX-TR
F:\DWG\MISC\MKTG\ERF8-XXX-XX-X-D-RA-XXX-TR-MKT.SLDDRW
BY:
D BOYCE
08-10-2010 SHEET 6 OF 6
相关型号：
ERF8-010-03-S-D-RA-EGP-TR
Board Stacking Connector, 20 Contact(s), 2 Row(s), Female, Right Angle, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
ERF8-010-05.0-L-DV-L2-TR
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
ERF8-010-05.0-L-DV-L2-TY
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
ERF8-010-05.0-L-DV-W-TY
Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
ERF8-010-05.0-S-DV-E-TR
Board Stacking Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.032 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
©2020 ICPDF网 联系我们和版权申明