FFMD-05-T-06.00-01-N-RW [SAMTEC]
CABLE ASSEM .05" 10POS M-F 6"REV;
| 型号： | FFMD-05-T-06.00-01-N-RW |
| 厂家： | 
SAMTEC |
| 描述： | CABLE ASSEM .05" 10POS M-F 6"REV |
| 文件： | 总5页 (文件大小：357K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AF
FFMD-XX-X-XX.XX-01-X-X-XXX
FIG 1
(FFMD-10-D-XX.XX-01-X SHOWN)
OPTION
No OF POSITIONS
-03 TO -25
-RW: REVERSE WIRING
-BXX: BREAKOUT OPTION
-O: OUTSIDE REVERSED
-M: MIDDLE REVERSED
-R: REVERSE
C
DO NOT
SCALE FROM
THIS PRINT
END ASSEMBLY
XX.XX [XX.X x 25.4] 1%
(SEE NOTE 7 & 9)
-D: DOUBLE END
-DXX: DAISY CHAIN (MINIMUM 2.00[50.8],
1.00[25.4] INCREMENTS)
-SR: STRAIN RELIEF
-S: SINGLE END
*-T: TRANSFER END
(NOT AVAILABLE WITH -O, -M,
-R, -DXX OR -BXX)
(SOLD AS ASSEMBLIES ONLY)
ASSEMBLY LENGTH
(2.00[50.8] MINIMUM)
C
LEAD STYLE
TRANSFER OPTION
(No. OF POS x .050)
[1.27])+.165[4.19] REF
-N: SOCKET HAS NOTCH POLARIZATION
(-T END ASSEMBLY ONLY)
(LEAVE BLANK FOR -S AND -D
END OPTIONS)
PLATING OPTIONS
LEAVE BLANK FOR STANDARD
(USE T-1S57-01-T AND C-67-L)
-L: SELECTIVE LIGHT GOLD
(USE T-1S57-01-L AND C-67-L)
-F: FLASH SELECTIVE GOLD
(USE T-1S57-01-F AND C-67-F)
-S: SELECTIVE GOLD
(NOT AVAILABLE ON POSITIONS -02
THRU -04)
C
.120 3.05
REF
(USE T-1S57-01-S AND C-67-S)
*16-25 POS TRANSFER END STRAIN RELIEF NOT RELEASED FOR PRODUCTION
FLUSH TO .010 0.25 MAX
CABLE OVERHANG
FIG 2
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
(FFMD-10-S-XX.XX-01-X SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FMC-XX-D
2
(SEE NOTE 7)
C
C
XX.XX[XX.XX x 25.4] ±1%
(SEE NOTE 7 & 9)
3
.200±.010 5.08±0.25
.121 3.07 REF
FMB-XX-D-XX
T-1S57-01-X
C
NOTCH DENOTES
FIRST POSITION
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. FFSD ASSEMBLY TO BE USED FOR TRANSFER END ONLY.
3. ALL ASSEMBLIES TO BE 100% ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
C
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V.
5. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.
6. FFMD CABLE ASSEMBLIES ARE LEAD FREE.
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND
PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE
THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS
ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR.
8. REFERENCE FFMD-XX-XX-X-XX (AND FFSD-XX-XX-X-N-XX
FOR -T OPTION)DRAWING FOR CONNECTOR ASSEMBLY
DIMENSIONS AND ITS REQUIREMENTS.
9. FOR LENGTHS LESS THAN 12.5" TOLERANCE SHALL BE +/-.125, ALL
OTHER LENGTHS SHALL BE +/-1%.
10. PACKAGE PER IDC STYLE CABLE SECTION OF PACKAGING MANUAL.
.XX: .01 [.3]
2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
INSULATOR: PBT, COLOR: BLACK
CONTACT: BeCu
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX
NO.
TERMINAL: PHOS BRONZE
WIRE: 30 AWG, 7/38, TINNED, STRANDED WITH
PVC INSULATOR
F:\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 1 OF 5
REVISION AF
FIG 3
FIG 5
(FFMD-10-D-XX.XX-01-X-SR SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(FFMD-10-X-XX.XX-01-X-N SHOWN)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
(FOR -T ONLY)
FIG 4
(FFMD-10-X-XX.XX-01-X-RW SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(IF OPTION IS SPECIFIED USE FFSD-XX-01-X-N)
02
01
03
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS INDICATOR
.075 1.91
C
REF
(No. OF POS. x .050[1.27]) + .315[8.00]
REF
NOTCH DENOTES FIRST POSITION
.040 1.02
REF
C
XX.XX[XX.X x 25.4] .13[3.2]
.039 1.00
5
C
.335±.01 8.51±0.254
FIG 7
FIG 6
(FFMD-10-T-XX.XX-01-X-N-B05 SHOWN)
(FFMD-10-T-XX.XX-01-X-N SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
"XX" = NO. OF CONDUCTORS PER ROW
BROKEN OUT FROM THE FIRST POSITION
4
"XX"
5.00[127.0] MAX
2.00[50.8] MIN
(MAY BE SMALLER THAN 2.00
ON AN ASSEMBLY LENGTH
OF 2.00, MUST BE SPLIT BACK
TO THE FIRST CONNECTOR)
IN-PROCESS 1
-SR ONLY
(XX.XX[XX.X x 25.4] + .4375[11.113]) .125[3.18]
C
+.006
-.003
C
+0.152
5.08
-0.076
.200
IN-PROCESS 2
-SR ONLY
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
C
XX.XX[XX.X x 25.4] .13[3.2]
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
NO.
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX
F:\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 2 OF 5
FIG 8
FIG 9
REVISION AF
(FFMD-10-D-XX.XX-01-X-DXX-O SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(FFMD-10-D-XX.XX-01-X-DXX-M SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -R OR -O OPTIONS)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -R OR -M OPTIONS)
FIRST POSITION
INDICATOR
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
FIRST POSITION INDICATOR
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
OUTSIDE CONNECTOR
REVERSED
WHEN DAISY CHAINED
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
FIG 11
FIG 10
(FFMD-10-T-XX.XX-01-X-N-DXX-M SHOWN)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -R OR -O OPTIONS)
(FFMD-10-T-XX.XX-01-X-N-DXX-O SHOWN)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -R OR -M OPTIONS)
XX.00(XX.0 x 25.4) ±.13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
OUTSIDE CONNECTOR REVERSED
WHEN DAISY CHAINED
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
NO.
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX
F:\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 3 OF 5
REVISION AF
FIG 12
FIG 13
(FFMD-10-D-XX.XX-01-DXX-R SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(FFMD-10-D-XX.XX-01-X-DXX)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -M OR -O OPTIONS)
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
FIG 15
FIG 14
(FFMD-10-T-XX.XX-01-X-N-DXX)
(FFMD-10-T-XX.XX-01-X-N-DXX-R SHOWN)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(SAME AS FIG 1 AND FIG 6, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
(NOT AVAILABLE WITH -M OR -O OPTIONS)
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
XX.00[XX.0 x 25.4] .13[3.2]
(MIN 2", SEE CALLOUT OPTION DXX)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
DWG. NO.
FFMD-XX-X-XX.XX-01-X-X-XXX
F:\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 4 OF 5
REVISION AF
FIG 17
FIG 16
(FFMD-25-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 1 AND FIG 16, DIFFERENT AS SHOWN)
(FOR POSITIONS 16-25 ONLY)
(FFMD-10-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 1 AND FIG 3, DIFFERENT AS SHOWN)
(FOR POSITIONS 2-15 ONLY)
*NOT RELEASED FOR PRODUCTION
5
.335±.010 8.51±0.254
C
6
7
8
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
DWG. NO.
FFMD-XX-X-XX.XX-01-X-X-XXX
BY:
T NEWTON 02/15/2008 SHEET 5 OF 5
F:\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
相关型号：
©2020 ICPDF网 联系我们和版权申明