首页 |元器件品牌

FFMD-09-S-40.00-01-RW [SAMTEC]

Board Connector, 18 Contact(s), 2 Row(s), Male, IDC Terminal, LEAD FREE;
FFMD-09-S-40.00-01-RW
型号： FFMD-09-S-40.00-01-RW
厂家： SAMTEC    SAMTEC
描述：

Board Connector, 18 Contact(s), 2 Row(s), Male, IDC Terminal, LEAD FREE
文件： 总5页 (文件大小：355K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
REVISION S  
FFMD-XX-X-XX.XX-01-X-X-XXX  
OPTION  
No OF POSITIONS  
DO NOT  
SCALE FROM  
THIS PRINT  
-03, -04, -05, -06, -07, -08, -09,  
-10, -13, -14, -15, -16, -17,  
-18, -19, -20, -22, -25  
-RW: REVERSE WIRING  
-BXX: BREAKOUT OPTION  
-O: OUTSIDE REVERSED  
-M: MIDDLE REVERSED  
-R: REVERSE  
FIG. 1  
END ASSEMBLY  
(FFMD-10-D-XX.XX-01-X SHOWN)  
-D: DOUBLE END  
-DXX: DAISY CHAIN (MINIMUM 2.00[50.8],  
1.00[25.4] INCREMENTS)  
-SR: STRAIN RELIEF  
-S: SINGLE END  
*-T: TRANSFER END  
C
XX.XX [XX.X x 25.4] .13[3.2]  
S
(NOT AVAILABLE WITH -O, -M,  
-R, -DXX OR -BXX)  
(SOLD AS ASSEMBLIES ONLY)  
(SEE NOTE 7)  
ASSEMBLY LENGTH  
(2.00[50.8] MINIMUM)  
LEAD STYLE  
TRANSFER OPTION  
-N: SOCKET HAS NOTCH POLARIZATION  
(-T END ASSEMBLY ONLY)  
(LEAVE BLANK FOR -S AND -D  
END OPTIONS)  
PLATING OPTIONS  
C
LEAVE BLANK FOR STANDARD  
(USE T-1S57-01-T AND C-67-L)  
-L: SELECTIVE LIGHT GOLD  
(USE T-1S57-01-L AND C-67-L)  
-F: FLASH SELECTIVE GOLD  
(USE T-1S57-01-F AND C-67-F)  
-S: SELECTIVE GOLD  
(No. OF POS x .050)[1.27])+.165[4.19] REF  
(NOT AVAILABLE ON POSITIONS -02  
THRU -04)  
(USE T-1S57-01-S AND C-67-S)  
*16-25 POS TRANSFER END STRAIN RELIEF NOT RELEASED FOR PRODUCTION  
C
FIG. 2  
(FFMD-10-S-XX.XX-01-X SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
.120 3.05  
REF  
XX.XX [XX.XX x 25.4] .13[3.2]  
(SEE NOTE 7)  
COLORED WIRE TO SIDE  
OF FIRST POS INDICATOR  
S
.010 0.25 MAX  
CABLE OVERHANG  
(SEE NOTE 7)  
FMC-XX-D  
S
2
C
3
.200±.010 5.08±0.25  
T-1S57-01-X  
.121 3.07 REF  
FMB-XX-D-XX  
NOTCH DENOTES FIRST POSITION  
PROPRIETARY NOTE  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
TOLERANCES ARE:  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
NOTES:  
DECIMALS  
ANGLES  
2
C
1.  
REPRESENTS A CRITICAL DIMENSION.  
.XX: .01 [.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
2. FFSD ASSEMBLY TO BE USED FOR TRANSFER END ONLY.  
3. ALL ASSEMBLIES TO BE 100% ELECTRONICALLY TESTED  
FOR SHORTS AND OPENS.  
.XXX: .005 [.13]  
C
.XXXX: .0020 [.051]  
SHEET SCALE: 2:1  
MATERIAL:  
DO NOT SCALE DRAWING  
DESCRIPTION:  
4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V.  
5. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.  
6. FFMD CABLE ASSEMBLIES ARE LEAD FREE.  
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY  
INSULATOR: PBT, COLOR: BLACK  
CONTACT: BeCu  
TERMINAL: PHOS BRONZE  
NO.  
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX  
7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY  
NOT EXTEND PAST THE CABLE INSULATION.  
S
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW  
BY:  
T NEWTON 02/15/2008 SHEET 1 OF 5  
FIG. 3  
REVISION S  
(FFMD-10-D-XX.XX-01-X-SR SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
FIG. 5  
FIG. 4  
(FFMD-10-X-XX.XX-01-X-N SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FOR -T ONLY)  
(FFMD-10-X-XX.XX-01-X-RW SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(IF OPTION IS SPECIFIED USE FFSD-XX-01-X-N)  
02  
COLORED WIRE TO OPPOSITE  
SIDE OF FIRST POS INDICATOR  
C
01  
03  
.075 1.91  
REF  
(No. OF POS. x .050[1.27]) + .315[8.00]  
REF  
NOTCH DENOTES FIRST POSITION  
C
XX.XX[XX.X x 25.4] .13[3.2]  
.039 1.00  
.040 1.02  
REF  
5
FIG. 6  
.335±.01 8.51±0.254  
FIG. 7  
(FFMD-10-T-XX.XX-01-X-N SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FFMD-10-T-XX.XX-01-X-N-B05 SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
"XX" = NO. OF CONDUCTORS PER ROW  
BROKEN OUT FROM THE FIRST POSITION  
4
"XX"  
IN-PROCESS 1  
-SR ONLY  
5.00[127.0] MAX  
2.00[50.8] MIN  
(XX.XX[XX.X x 25.4] + .4375[11.113]) .125[3.18]  
IN-PROCESS 2  
-SR ONLY  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733  
FAX: 812-948-5047  
code: 55322  
e-Mail: info@SAMTEC.com  
C
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY  
XX.XX[XX.X x 25.4] .13[3.2]  
NO.  
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX  
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW  
BY:  
T NEWTON 02/15/2008 SHEET 2 OF 5  
FIG. 8  
FIG. 9  
REVISION S  
(FFMD-10-D-XX.XX-01-X-DXX-O SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FFMD-10-D-XX.XX-01-X-DXX-M SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
FIRST POSITION INDICATOR  
XX.XX[XX.X x 25.4] .13[3.2]  
FIRST POSITION INDICATOR  
(MIN 2")  
XX.XX[XX.X x 25.4] .13[3.2]  
(MIN 2")  
OUTSIDE CONNECTOR REVERSED  
WHEN DAISY CHAINED  
MIDDLE CONNECTOR REVERSED  
WHEN DAISY CHAINED  
FIG. 10  
FIG. 11  
(FFMD-10-T-XX.XX-01-X-N-DXX-O SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FFMD-10-T-XX.XX-01-X-N-DXX-M SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
XX.XX[XX.X x 25.4] .13[3.2]  
(MIN 2")  
FIRST POSITION INDICATOR  
FIRST POSITION INDICATOR  
XX.XX[XX.X x 25.4] .13[3.2]  
(MIN 2")  
MIDDLE CONNECTOR REVERSED  
WHEN DAISY CHAINED  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
OUTSIDE CONNECTOR REVERSED  
WHEN DAISY CHAINED  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY  
NO.  
DWFG.FMD-XX-X-XX.XX-01-X-X-XXX  
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW  
BY:  
T NEWTON 02/15/2008 SHEET 3 OF 5  
REVISION S  
FIG. 12  
FIG. 13  
(FFMD-10-D-XX.XX-01-DXX-R SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FFMD-10-D-XX.XX-01-X-DXX)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
BOTH CONNECTORS REVERSED  
WHEN DAISY CHAINED  
FIRST POSITION INDICATOR  
FIRST POSITION INDICATOR  
XX.XX[XX.X x 25.4] .13[3.2]  
XX.XX[XX.X x 25.4] .13[3.2]  
(MIN 2")  
(MIN 2")  
FIG. 14  
FIG. 15  
(FFMD-10-T-XX.XX-01-X-N-DXX-R SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FFMD-10-T-XX.XX-01-X-N-DXX)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)  
XX.XX[XX.X x 25.4] .13[3.2]  
(MIN 2")  
FIRST POSITION INDICATOR  
FIRST POSITION INDICATOR  
BOTH CONNECTORS REVERSED  
WHEN DAISY CHAINED  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
XX.XX[XX.XX x 25.4] .13[3.2]  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY  
(MIN 2")  
DWG. NO.  
FFMD-XX-X-XX.XX-01-X-X-XXX  
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW  
BY:  
T NEWTON 02/15/2008 SHEET 4 OF 5  
REVISION S  
FIG. 17  
FIG. 16  
(FFMD-25-T-XX.XX-01-X-N-SR SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FOR POSITIONS 16-25 ONLY)  
(FFMD-10-T-XX.XX-01-X-N-SR SHOWN)  
(SAME AS FIG. 1, DIFFERENT AS SHOWN)  
(FOR POSITIONS 2-15 ONLY)  
*NOT RELEASED FOR PRODUCTION  
5
6
7
8
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY  
DWG. NO.  
FFMD-XX-X-XX.XX-01-X-X-XXX  
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW  
BY:  
T NEWTON 02/15/2008 SHEET 5 OF 5  

相关型号：

FFMD-09-T-09.80-01-N-SR

 Interconnection Device, LEAD FREE
SAMTEC

FFMD-10-01

 .050 CABLE PLUG
SAMTEC

FFMD-10-D-02.00-01

 CABLE ASSEM .05" 20POS M-M 2"
SAMTEC

FFMD-10-D-02.00-01-D

 Interconnection Device, ROHS COMPLIANT
SAMTEC

FFMD-10-D-02.00-01-F-O

 Interconnection Device
SAMTEC

FFMD-10-D-02.00-01-F-RW

 Interconnection Device
SAMTEC

FFMD-10-D-02.00-01-L-RW

 Cable Assembly
SAMTEC

FFMD-10-D-02.00-01-L-SR

 Cable Assembly
SAMTEC

FFMD-10-D-02.00-01-RW-R

 Cable Assembly
SAMTEC

FFMD-10-D-02.00-01-S-M

 Cable Assembly
SAMTEC

FFMD-10-D-02.00-L

 Interconnection Device
SAMTEC

FFMD-10-D-02.00-S

 Interconnection Device
SAMTEC
©2020 ICPDF网 联系我们和版权申明