FFSD-25-D-2.00-01-S-N-R [SAMTEC]
Cable Assembly;
| 型号： | FFSD-25-D-2.00-01-S-N-R |
| 厂家： | 
SAMTEC |
| 描述： | Cable Assembly |
| 文件： | 总3页 (文件大小：214K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION AG
1. HIDDEN LINES ARE USED TO SHOW POLARIZATION
FFSD-XX-X-XX.XX-01-X-X-XXX
WHEN USING -N OPTION.
C
2.
REPRESENTS A CRITICAL DIMENSION.
3. FFSD CABLE ASSEMBLIES ARE LEAD FREE.
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED
FOR SHORTS AND OPENS.
DO NOT
SCALE FROM
THIS PRINT
OPTION
-RW: REVERSE WIRING
C
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V.
(NOT AVAILABLE WITH -RN1 OR -RN2)
-D"XX": DAISY CHAIN (MINIMUM 2.00[50.8],
1.00[25.4] INCREMENTS)
6. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.
7. NOTE DELETED.
No OF POSITIONS
-02 THRU -25
(PER ROW)
8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY
NOT EXTEND PAST THE CABLE INSULATION.
9. REFERENCE FFSD-XX-XX-X-N-XXX FOR CONNECTOR ASSEMBLY
DIMENSIONS AND ITS REQUIREMENTS.
-R: REVERSED
AG
(NOT AVAILABLE WITH -M OR -O)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
-RN1: REVERSE POLARIZATION NOTCH
(NOT AVAILABLE WITH -RW OR -RN2)
-RN2: REVERSE POLARIZATION NOTCH
(NOT AVAILABLE WITH -RW OR -RN1)
-M: MIDDLE REVERSE
END ASSEMBLY
-S: SINGLE END
-D: DOUBLE END
FIG 1
ASSEMBLY LENGTH
-D"XX", -R, -M & -O OPTION: 2.00[50.8] MINIMUM
ALL OTHER OPTION: 1.00[25.4] MINIMUM
AG
(FFSD-10-D-XX.XX-01-X-N SHOWN)
AG
C
(NOT AVAILABLE WITH -R OR -O)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
XX.XX[XX.X x 25.4] ±.13[3.2]
(SEE NOTE 8)
LEAD STYLE
AG -O: OUTSIDE REVERSE
(NOT AVAILABLE WITH -R OR -M)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
-SR: STRAIN RELIEF
PLATING OPTIONS
- LEAVE BLANK FOR STANDARD, USE C-67-L
(NOT AVAILABLE WITH -O, -M,
-R, OR -DXX)
-S: USE C-67-S
-F: USE C-67-F
(SOLD AS ASSEMBLIES ONLY)
STANDARD POLARIZATION NOTCH
-N: POLARIZATION NOTCH
(NOT AVAILABLE IN -02 THRU -04)
(LEAVE BLANK FOR -02, -03, -04)
.075 1.91
REF
C
.120 3.05
REF
C
(No OF POS x .050[1.27])
+ .165[4.19] REF
FIG 2
(FFSD-10-S-XX.XX-01-X-N SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
.010 0.25 MAX
CABLE OVERHANG
(SEE NOTE 8)
XX.XX[XX.X x 25.4] .13[3.2]
(SEE NOTE 8)
.006 0.15 MAX
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
2
C
-N OPTION
+.006
-.003
+0.15
5.08
-0.08
.200
.040 1.02
REF
-RN1 OPTION
-N OPTION
1
NOTCH DENOTES
FIRST POSITION
-RN2 OPTION
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FIG 11
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(FFSD-10-X-XX.XX-01-X-N-RW SHOWN)
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS. INDICATOR
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATORS: PBT, COLOR: BLACK
CONTACT: BeCu
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
WIRE: 30 AWG, 7/38, TINNED, STRANDED WITH
GRAY PVC INSULATOR
FFSD-XX-X-XX.XX-01-X-X-XXX
PLATING: .000010 GOLD OVER .000050 NICKEL
REMAINDER: .000200 REF TIN OVER .000050 NICKEL
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 1 OF 3
FIG 5
FIG 4
REVISION AG
(FFSD-10-D-XX.XX-01-X-N-DXX-M SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
(FFSD-10-D-XX.XX-01-X-N-DXX-O SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
FIG 3
(FFSD-10-D-XX.XX-01-X-N-RN1 SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIRST POSITION INDICATOR
FIRST CONNECTOR
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIRST POSITION INDICATOR
SECOND CONNECTOR
OUTSIDE CONNECTOR REVERSED WHEN DAISY CHAINED
MIDDLE CONNECTOR REVERSED WHEN DAISY CHAINED
FIG 6
FIG 7
(FFSD-10-D-XX.XX-01-X-N-RN2 SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(FFSD-10-D-XX.XX-01-X-N-DXX-R SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTION)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
(FFSD-10-D-XX.XX-01-X-N-DXX SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
FIRST CONNECTOR
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
SECOND CONECTOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
NOTE:
-RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY
( NOT AVAILABLE WITH -R OPTION)
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
-RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY
(NOT AVAILABLE WITH -R OPTION)
(REVERSE NOTCH NOT AVAILABLE WITH -RW OR ANY
DAISY CHAIN OPTIONS)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
BOTH CONNECTORS REVERSED WHEN DAISY CHAINED
DWG. NO.
FFSD-XX-X-XX.XX-01-X-X-XXX
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 2 OF 3
FIG 9
REVISION AG
STRAIN RELIEF OPTION (POS 2-15 ONLY)
(FFSD-10-D-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
IN-PROCESS 1
(2-15 POS -SR ONLY)
C
(No. OF POS x .050[1.27])
+ .315[8.00]
REF
XX.XX[XX.X x 25.4] + .4375[11.113]±.125[3.18]
IN-PROCESS 2
4
(2-15 POS -SR ONLY)
.030 0.75
.335±.010 8.51±0.25
(XX.XX[XX.XX x 25.4] ± .13[3.2])
3
C
C
(XX.XX[XX.XX x 25.4] .13[3.2]
IN-PROCESS 1
FIG 10
(16-25 POS -SR ONLY)
STRAIN RELIEF OPTION (POS 16-25 ONLY)
(FFSD-25-D-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 2, DIFFERENT AS SHOWN)
SCALE 1 : 1
XX.XX[XX.XX x 25.4] +.4375[11.113] .125[3.18]
IN-PROCESS 2
(16-25 POS -SR ONLY)
+.002
-.000
0.58+0.05
C
DETAIL 'A'
SCALE 8 : 1
.0228
0.00
XX.XX[XX.XX x 25.4] .13[3.2]
C
IN-PROCESS 3
(16-25 POS -SR ONLY)
No. OF POS x .050[1.27] + .315[8.00] REF
6
.039 0.99
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
'A'
XX.XX[XX.XX x 25.4] .13[3.2]
DESCRIPTION:
5
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
C
NO.
DWG. FFSD-XX-X-XX.XX-01-X-X-XXX
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008 SHEET 3 OF 3
相关型号：
©2020 ICPDF网 联系我们和版权申明