FTM-115-03-H-DV [SAMTEC]
Board Connector, 30 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal,;
| 型号： | FTM-115-03-H-DV |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector, 30 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, |
| 文件： | 总3页 (文件大小：309K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FTM-1XX-XX-XX-DV-XX
REVISION BR
NO. OF POS. x .03937[1.00]
- .03937[1.00] REF
OPTION
No OF POSITIONS
-TR: TAPE & REEL PACKAGING
-P: PICK AND PLACE PAD (USE PPP-30)
(USE PPP-30-NT FOR TAPE & REEL)
(AVAILABLE ON POSITIONS -07 THRU -50)
(SEE FIG. 4, SHT. 3)
(PER ROW)
DO NOT
SCALE FROM
THIS PRINT
-02 THRU -50 (UNSHROUDED)
-05 THRU -46 (SHROUDED)
C2
(NO. OF POS. x .03937[1.00]) .010[.25]
(SEE NOTE 1)
-S: END SHROUDS (05 POS. MINIMUM)
(SEE NOTE 8) (SEE NOTE 9)
2
LEAD STYLE
-02: .075 [1.91] POST HEIGHT
-03: .065 [1.65] POST HEIGHT
PRESS FIT SHROUDS: SEE FIG 2
MOLDED SHROUDS: SEE FIG. 6
-SA: END SHROUDS W/ ALIGNMENT PINS
(SEE FIG. 3, SHT. 2) (SEE NOTE 9)
(05 POS. PER ROW MINIMUM, 46 POS.
PER ROW MAXIMUM)
100
PLATING SPECIFICATION
-F: FLASH SELECTIVE (USE T-1S16-XX-F-2)
-L: LIGHT SELECTIVE (USE T-1S16-XX-L-2)
-H: HEAVY GOLD (USE T-1S16-XX-H-2)
-G: GOLD (USE T-1S16-XX-G-2)
-FM: FLASH GOLD W/ MATTE TIN TAILS
(USE T-1S16-XX-F-2)
(USE FTM-XX-D, USE FTMH-75-D-ES-XX-X
FOR MOLDED END SHROUDS)
.205 5.21 REF
.125 3.18 REF
ROW OPTION
-DV: DUAL VERTICLE
1
99
-LM: LIGHT GOLD W/ MATTE TIN TAILS
(USE T-1S16-XX-L-2)
FTM-XX-D
1
MAX SWAY
(EITHER DIRECTION)
C1
.03937±.00400 1.0000±0.1016
.012 0.30 SQ (TYP) REF
T-1S16-XX-XX-2
"A"
C5
+.005
-.000
.050
1.27+0.13
(SEE TABLE 1)
0.00
90°±3°
.004[.10]
.038 0.97 REF
C6
.040 1.02
(SEE NOTE 2)
FIG. 1
FTM-1XX-02-X-DV SHOWN
NOTES:
C7
1. PARTS MAY BE CUT TO POSITION; .010 MAX CUT FLASH
2. SHEAR TAILS TO DIMENSION SHOWN; .003 MAX BURR.
3. NOTE DELETED.
C8
C1
4.
REPRESENTS A CRITICAL DIMENSION
FOR STATISTICAL PROCESS CONTROL.
PATENT NUMBERS
5655914 / 5785536
5. NOTE DELETED.
6. NOTE DELETED.
C15
7. POSITIONS -02 THRU -04 TO BE LAYER PACKAGED, AND
POSITIONS -05 THRU -50 TO BE TUBE PACKAGED.
8. PARTS WITH -S OPTION ARE TO APPEAR AS SHOWN IN FIG 2
OR FIG 6 AT SAMTEC'S DISCRETION.
9. 4 POSITIONS MUST BE ADDED TO PART CALL OUT TO ALLOW FOR PUSH ON SHROUDS.
EX: FTM-125-02-L-DV-S REQUIRES A 29 POSITION STRIP.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
3
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 1:0.333333
DESCRIPTION:
DO NOT SCALE DRAWING
MATERIAL:
C3
C4
1mm x 1mm LOW PROFILE SMT STRIP ASM
DWG. NO.
BODY: VECTRA E130
COLOR: BLACK
MAX FLASH ALLOWED:
.002 [.05]
TERMINAL:
PHOS BRONZE
FTM-1XX-XX-XX-DV-XX
MAX GATE VESTIGE
ALLOWED: .002 [.05]
B MENEAR 2/13/2006
SHEET 1 OF 3
BY:
F:\DWG\MISC\MKTG\FTM-1XX-XX-XX-DV-XX-MKT.SLDDRW
FIG. 3
FIG. 2
REVISION BR
-SA SHOWN: PRESS FIT SHROUD
FTM-1XX-02-X-DV-SA
-S OPTION
FTM-1XX-02-X-DV-S SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) (SEE NOTE 8) (SEE NOTE 9)
(PRESS FIT SHROUDS TO HAVE 8 UNUSED SOLDER TAILS AS SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)
(SEE NOTE 9)
(NO OF POS. x .03937[1.0000] + .025[.65]
C9
(NO OF POS. x .03937[1.0000]) + .025[.65]
(NO OF POS. x .03937[1.0000]) + .1575[4.000] REF
(NO OF POS. x .03937[1.0000]) +
.2756[7.000] REF
.127 3.23 REF
.127 3.23 REF
FEM
.175 4.45
REF
.158 4.00
REF
C10
.115 2.92 REF
.140 3.56
C16
.217 5.50
REF
.175 4.45
REF
(NO. OF POS. +4)
X .03937[1.00] .010[0.25]
FEM-A
.115 2.92
REF
.140 3.56
.092 2.33
REF
.03937 1.00
({NO. OF POS. PER FINISHED ASSEMBLY +2}
x .03937[1.0000]) .010[.025]
((NO OF POS. + 4)
x .03937[1.00]) .010[0.25]
C12
.055 1.40
.039 1.00
REF
(NO OF POS. x .03937[1.0000]
+ .236[6.00])
.064 1.63
FTM-50-D-ES-XX
REF
.01200 0.30 SQ(TYP) REF
.127 3.23 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
"A"
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(SEE TABLE 1)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
FIG. 6
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
-S OPTION: MOLDED SHROUD
FTM-1XX-02-X-DV-S SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)(SEE NOTE 8)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
1mm x 1mm LOW PROFILE SMT STRIP ASM
DWG. NO.
FTM-1XX-XX-XX-DV-XX
SHEET 2 OF 3
F:\DWG\MISC\MKTG\FTM-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
B MENEAR 2/13/2006
REVISION BR
FIG. 4
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1)
"M"
(SEE NOTE)
C13
"P"
.125 3.18 REF FOR TUBED
.190 [4.83] REF FOR TAPE & REEL
(SEE NOTE)
.200 5.08 REF
.125 3.18
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .200 [5.08]) / 2} +/-.020 [.51]
PACKAGING VIEW
NOTE:
(SEE NOTE 7)
ONLY POSITIONS -05 THRU -50 ARE TO BE
TUBED. POSITIONS -02 THRU -04 TO BE
LAYER PACKAGED ONLY. INSERT PLUG TP-30
AT AN ANGLE INTO PT-1-24-01-49, PLUG
MUST SUPPORT THE INSULATOR.
BR
PT-1-24-13-09
PT-1-24-13-09
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PT-1-24-01-49
PT-1-24-01-43
BR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
1mm x 1mm LOW PROFILE SMT STRIP ASM
DWG. NO.
-S, -S-P
FTM-1XX-XX-XX-DV-XX
NO OPTION
-SA, -SA-P, SA
-P
F:\DWG\MISC\MKTG\FTM-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
B MENEAR 2/13/2006
SHEET 3 OF 3
相关型号：
FTM-115-03-L-DV
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC
FTM-115-03-L-DV-P-TR
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle, ROHS COMPLIANT
SAMTEC
FTM-115-03-L-DV-S
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle,
SAMTEC
FTM-115-03-L-DV-S-P-TR
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle,
SAMTEC
©2020 ICPDF网 联系我们和版权申明