首页 |元器件品牌 | PCB在线计价/下单
首页 > FTMH-134-03-H-DV-ES-A-P-TR

FTMH-134-03-H-DV-ES-A-P-TR

更新时间：2024-09-19 01:42:11
品牌：SAMTEC
描述：Board Connector

PDF下载

中文翻译

PCB计价

FTMH-134-03-H-DV-ES-A-P-TR 概述

Board Connector

FTMH-134-03-H-DV-ES-A-P-TR 数据手册

通过下载FTMH-134-03-H-DV-ES-A-P-TR数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
FTMH-1XX-XX-XX-DV-XX  
REVISION BE  
No OF POS PER ROW  
-02 THRU -50  
OPTIONS  
-P: PICK & PLACE PAD (USE PPP-30)  
(USE PPP-30-NT FOR TAPE & REEL)  
(SEE FIG 3, SHT 4; 6 POS MIN)  
(SEE NOTE 10)  
DO NOT  
SCALE FROM  
THIS PRINT  
TABLE 1  
LEAD STYLE  
-02: .075 [1.91]  
-TR: TAPE & REEL PACKAGING  
LEAD STYLE  
"A"  
C
"B"  
-ES: SNAP ON END SHROUDS  
(USE T-1S16-03-XX-2)  
-03: .065 [1.65]  
(USE T-1S16-04-XX-2)  
(SEE FIG 2, SHT 2; 9 POS MIN)  
-02  
-03  
.075 [1.91]  
.065 [1.65]  
0.075  
0.055  
MOLD TO POSITION END SHROUDS  
(5 POS MIN; SEE FIG 2, SHT 2)  
C
(SAMTEC DISCRETION ON WHICH END SHROUDS  
ARE USED FOR POSITIONS -09 AND GREATER)  
-EP: GUIDE POST (SEE FIG 4, SHT 4; 9 POS MIN)  
(USE ONLY WHEN MATING WITH A CLM)  
-EC: LOCKING CLIP (SEE FIG 5, SHT 4)  
(SEE NOTE 9; 9 POS MIN)  
PLATING SPECIFICATION  
-L: 10µ" LIGHT SELECTIVE GOLD IN  
CONTACT AREA, MATTE TIN ON TAIL  
-F: 3µ" FLASH SELECTIVE GOLD IN  
CONTACT AREA, MATTE TIN ON TAIL  
-H: 30µ" HEAVY GOLD IN CONTACT  
AREA, 3µ" FLASH GOLD ON TAIL  
-G: 10µ" GOLD IN CONTACT AREA,  
3µ" FLASH GOLD ON TAIL  
-LM: 10µ" LIGHT SELECTIVE GOLD IN  
CONTACT AREA, MATTE TIN ON TAIL  
-FM: 3µ" FLASH SELECTIVE GOLD IN  
CONTACT AREA, MATTE TIN ON TAIL  
-A: ALIGNMENT PIN (SEE FIG 6 & 7, SHT 5)  
(SAMTEC DISCRETION ON WHICH -A PIN IS USED)  
(MOLDED: 3 POS MIN, USE FTMH-75-D-XX)  
(STAKED: 7 POS MIN, USE FTMH-60-D)  
ROW SPECIFICATION  
-DV: DOUBLE ROW VERTICAL  
(USE FTMH-75-D)  
C
No OF POS x .03937[1.0000]±.010[0.25]  
No OF POS X .03937[1.0000]-.03937[1.0000]  
02  
50  
.125 3.18  
REF  
FTMH-75-D  
49  
01  
2
MAX SWAY  
(EITHER DIRECTION)  
"B"  
CONTACT AREA  
(SEE NOTE 8)  
(SEE TABLE 1)  
.012 0.30 SQ  
REF  
C
MAX SWAY  
2
2
MAX SWAY  
T-1S16-03-XX-2  
(EITHER DIRECTION)  
(EITHER DIRECTION)  
"A"  
(SEE TABLE 1)  
C
90°±3°  
+.005  
-.000  
.0705  
1.791+0.13 (SEE NOTE 6)  
0.00  
.004[0.10]  
SEE NOTE 3  
C
SEE NOTE 4  
(2 PLCS)  
.0585 1.486 REF  
FIG 1  
FTMH-125-03-X-DV SHOWN  
.040 1.02 REF  
(SEE NOTE 7)  
.205±.008 5.21±0.20  
NOTES:  
.03937±.004 1.0000±0.10  
C
C
1.  
REPRESENTS CRITICAL DIMENSION.  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
*
*
2. MINIMUM PUSHOUT FORCE: 1.0 LB = 16 OZ.  
3. MAXIMUM BURR: .003 [0.08]  
C
C
TOLERANCES ARE:  
4. MAXIMUM CUT FLASH: .010 [0.25]  
DECIMALS  
ANGLES  
2
5. POSITIONS -02 THRU -04 TO BE LAYER PACKAGED.  
6. MEASURED AT BEND RADIUS.  
.XX: .01[0.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
.XXX: .005[0.13]  
7. SHEAR TAILS TO DIMENSION SHOWN.  
.XXXX: .0020[0.051]  
8. FOR SELECTIVE PLATING OPTIONS, GOLD PLATING TO  
BE ON POST, TIN PLATING TO BE ON TAIL.  
SHEET SCALE: 5:1  
DO NOT SCALE DRAWING  
DESCRIPTION:  
MATERIAL  
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP  
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -EC OPTION  
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS  
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -EC OPTION.  
10. NUMBER OF POSITIONS MAY BE AS HIGH AS -75 FOR SAMTEC  
MANUFACTURING ONLY.  
INSULATOR:  
NO.  
DWG. FTMH-1XX-XX-XX-DV-XX  
BLACK, LCP, UL-94-V-0  
TERMINAL:  
PHOSPHOR BRONZE  
PURVIS  
04/22/96  
SHEET 1 OF 5  
BY:  
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW  
REVISION BE  
(NO OF POSITIONS + 2) x .03937[1.0000]±.008[0.20]  
C
.170 4.32  
REF  
.206 5.24 REF  
ES-FTMH  
.128 3.25 REF  
.151 3.84  
C
SNAP ON END  
SHROUDS  
.205 5.21  
(No OF POS + 2) x .03937[1.0000] ±.010[0.25]  
C
(No OF POS x .03937[1.0000]  
+.021[0.52] REF  
[0.08]  
[0.03]  
+.003  
-.001  
(No OF POS - 1) x .03937[1.0000]  
.175 4.45 REF  
FTMH-75-ES-XX  
.0415 1.054 REF  
.1525 3.874 REF  
MOLDED TO POSITION END  
SHROUDS  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
*
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
FIG 2  
-ES: END SHROUDS  
FTMH-112-02-X-DV-ES SHOWN  
DO NOT SCALE DRAWING  
SHEET SCALE: 5:1  
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP  
DWG.  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
NO. FTMH-1XX-XX-XX-DV-XX  
SHEET 2 OF 5  
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW  
BY:  
PURVIS  
04/22/96  
REVISION BE  
THEORETICAL  
CUT LINES  
FTMH-105-XX-XX-DV-ES SHOWN (BEFORE CUT)  
THEORETICAL CUT LINES  
FTMH-110-XX-XX-DV-ES SHOWN (BEFORE CUT)  
THEORETICAL CUT LINES  
FTMH-113-XX-XX-DV-ES SHOWN (BEFORE CUT)  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 5:1  
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP  
DWG.  
NO. FTMH-1XX-XX-XX-DV-XX  
SHEET 3 OF 5  
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW  
BY:  
PURVIS  
04/22/96  
NOTE  
REVISION BE  
"M" = USED MEASURED DIMENSION (REF)  
"P" = (("M" - .200[5.08]) / 2) ±.020[.51]  
"B" REF  
(SEE TABLE 3)  
"M"  
(SEE NOTE)  
C
.200 5.08  
REF  
"P"  
(SEE NOTE)  
C
L
.125 3.18  
TABLE 3  
FIG 3  
-P: PICK & PLACE PAD  
FTMH-125-03-X-DV-P SHOWN  
PAD  
"B"  
PPP-30  
.125[3.18]  
.190[4.83]  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
PPP-30-NT  
C
NO OF POS x .03937[1.0000] + .216[5.48]±.008[0.20]  
NO OF POS x .03937[1.0000] + .137[3.47] REF  
FTMH-EP  
.075 1.91  
C
L
REF  
.122 3.10  
REF  
.250 6.35  
REF  
C
.273 6.94  
FIG 4  
.170 4.32 REF  
.275 6.99 REF  
-EP: GUIDE POST  
FTMH-125-03-X-DV-EP SHOWN  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
C
NO OF POS x .03937[1.0000] + .160[4.07]±.008[0.20]  
.170 4.32  
REF  
FTMH-EC  
.128 3.25 REF  
C
.151 3.84  
LC-05-TM  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
.070 1.78  
C
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
NO OF POS x .03937[1.0000] + .110[2.84]±.008[0.20]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
.056 1.42 REF  
FIG 5  
-EC: LOCKING CLIP  
DO NOT SCALE DRAWING  
SHEET SCALE: 5:1  
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP  
DWG.  
FTMH-125-03-X-DV-EC SHOWN  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
NO. FTMH-1XX-XX-XX-DV-XX  
PURVIS  
04/22/96  
SHEET 4 OF 5  
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW  
BY:  
(No OF POS -2) x .03937[1.0000]±.005[0.13]  
REVISION BE  
FTMH-60-D  
SM-A7H  
.025 0.64  
FIG 6  
-A: ALIGNMENT PIN (STAKED)  
(MIN 7 POSITIONS)  
.028 0.71  
C
REF  
FTMH-125-03-X-DV-A SHOWN  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
FTMH-75-D-XX  
.037 0.94 REF  
.025 0.64  
(No OF POS -2) x .03937[1.0000] REF  
FULL RADIUS  
.025 0.64  
REF  
FIG 7  
-A: ALIGNMENT PIN (MOLDED)  
(MIN 3 POSITIONS)  
FTMH-125-03-X-DV-A SHOWN  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
TABLE 2  
(SEE NOTE 5 FOR PACKAGING NOTES)  
LEAD STYLE  
OPTION (S)  
PACKAGING TUBE  
TUBE PLUG  
-02, -03  
-02, -03  
-02, -03  
-02, -03  
-02, -03  
-02, -03  
-NONE  
-A  
-P, -A-P  
PT-1-24-01-60  
PT-1-24-01-60  
PT-1-24-01-60  
PT-1-24-01-63  
PT-1-24-01-60  
PT-1-24-02-15  
TP-03 (x 2)  
TP-03 (x 2)  
TP-03 (x 2)  
TP-24 (x 2)  
TP-03 (x 2)  
TP-03 (x 2)  
-ES, -ES-P, -ES-A, EP  
-EC, -EC-P, -EC-A  
-EP-A, -EP-A-P  
-ES-P OPTION  
PT-1-24-01-63  
-A OPTION  
PT-1-24-01-60  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
*
*
-EC OPTION  
PT-1-24-01-60  
BE  
-EP-A-P OPTION  
PT-1-24-02-15  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail: info@SAMTEC.com code: 55322  
DESCRIPTION:  
DO NOT SCALE DRAWING  
SHEET SCALE: 5:1  
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP  
DWG.  
PACKAGING VIEWS  
NO. FTMH-1XX-XX-XX-DV-XX  
PURVIS  
04/22/96  
SHEET 5 OF 5  
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW  
BY:  

FTMH-134-03-H-DV-ES-A-P-TR 相关器件

型号 制造商 描述 价格 文档
FTMH-134-03-L-DH SAMTEC CONN HEADER 68POS DL 1MM R/A SMD 获取价格
FTMH-134-03-L-DH-EC-TR SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator 获取价格
FTMH-134-03-L-DH-ES-K SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator 获取价格
FTMH-134-03-L-DV-A SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
FTMH-134-03-L-DV-EC-P SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator 获取价格
FTMH-134-03-L-DV-EP-P SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator 获取价格
FTMH-134-03-L-DV-ES-A-P-TR SAMTEC Board Connector 获取价格
FTMH-134-03-L-DV-ES-P SAMTEC Board Connector, 68 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator 获取价格
FTMH-134-03-L-DV-P SAMTEC Board Connector, 获取价格
FTMH-134-03-L-DV-P-TR SAMTEC Board Connector 获取价格

FTMH-134-03-H-DV-ES-A-P-TR 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    5
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    8
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6

    • 热门型号

  • LM358
  • UPC8158
  • XC6105A618
  • 2N5087/D28Z
  • TMM-136-06-S-S-SM-23-P
  • NC7WZ16P6X
  • SDR10KSM
  • STC53K33N07
  • ERG3SG242
  • M2XRP2-J1Z1-R
  • TMM-139-01-G-S-SM
  • 54F20
  • TMP513
  • SZ6A11
  • PEL12S
  • 概述
  • 数据手册
    • 2024 ICPDF网 联系我们和版权申明:QQ 272164286