FTMH-137-03-L-DV [SAMTEC]
CONN HEADER 74POS DUAL 1MM SMD;
| 型号： | FTMH-137-03-L-DV |
| 厂家： | 
SAMTEC |
| 描述： | CONN HEADER 74POS DUAL 1MM SMD |
| 文件： | 总6页 (文件大小：285K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION BJ
FTMH-1XX-XX-XX-DV-XX
No OF POS PER ROW
-02 THRU -50
OPTIONS
-P: PICK & PLACE PAD (USE PPP-30)
(USE PPP-30-NT FOR TAPE & REEL)
(SEE FIG 3, SHT 4; 6 POS MIN)
(SEE NOTE 10)
TABLE 1
LEAD STYLE
-02: .075 [1.91]
-TR: TAPE & REEL PACKAGING
LEAD STYLE
"A"
C
"B"
-ES: SNAP ON END SHROUDS
(USE T-1S16-03-XX-2)
-03: .065 [1.65]
(USE T-1S16-04-XX-2)
(SEE FIG 2, SHT 2; 9 POS MIN)
-02
-03
.075 [1.91]
.065 [1.65]
0.075
0.055
MOLD TO POSITION END SHROUDS
(5 POS MIN; SEE FIG 2, SHT 2)
C
(SAMTEC DISCRETION ON WHICH END SHROUDS
ARE USED FOR POSITIONS -09 AND GREATER)
-EP: GUIDE POST (SEE FIG 4, SHT 4; 9 POS MIN)
(USE ONLY WHEN MATING WITH A CLM)
-EC: LOCKING CLIP (SEE FIG 5, SHT 4)
(SEE NOTE 9; 9 POS MIN)
PLATING SPECIFICATION
-L: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" FLASH GOLD ON TAIL
-G: 10µ" GOLD IN CONTACT AREA,
3µ" FLASH GOLD ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-A: ALIGNMENT PIN (SEE FIG 6 & 7, SHT 5)
(SAMTEC DISCRETION ON WHICH -A PIN IS USED)
(MOLDED: 3 POS MIN, USE FTMH-75-D-XX)
(STAKED: 7 POS MIN, USE FTMH-60-D)
DO NOT
SCALE FROM
THIS PRINT
ROW SPECIFICATION
-DV: DOUBLE ROW VERTICAL
(USE FTMH-75-D)
C
No OF POS x .03937[1.0000]±.010[0.25]
No OF POS X .03937[1.0000]-.03937[1.0000]
02
50
.125 3.18
REF
FTMH-75-D
49
01
2
MAX SWAY
(EITHER DIRECTION)
"B"
CONTACT AREA
(SEE NOTE 8)
(SEE TABLE 1)
.012 0.30 SQ
REF
C
MAX SWAY
2
2
MAX SWAY
T-1S16-03-XX-2
(EITHER DIRECTION)
(EITHER DIRECTION)
"A"
(SEE TABLE 1)
C
90°±3°
+.005
-.000
.0705
1.791+0.13 (SEE NOTE 6)
0.00
.004[0.10]
SEE NOTE 3
C
SEE NOTE 4
(2 PLCS)
.0585 1.486 REF
FIG 1
FTMH-125-03-X-DV SHOWN
.040 1.02
(SEE NOTE 7)
.205 5.21 REF
NOTES:
.03937±.004 1.0000±0.10
C
C
1.
REPRESENTS CRITICAL DIMENSION.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
*
*
2. MINIMUM PUSHOUT FORCE: 1.0 LB = 16 OZ.
3. MAXIMUM BURR: .003 [0.08]
C
C
TOLERANCES ARE:
4. MAXIMUM CUT FLASH: .010 [0.25]
DECIMALS
ANGLES
2
5. POSITIONS -02 THRU -04 TO BE LAYER PACKAGED.
6. MEASURED AT BEND RADIUS.
.XX: .01[0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005[0.13]
7. SHEAR TAILS TO DIMENSION SHOWN.
.XXXX: .0020[0.051]
8. FOR SELECTIVE PLATING OPTIONS, GOLD PLATING TO
BE ON POST, TIN PLATING TO BE ON TAIL.
SHEET SCALE: 5:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -EC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -EC OPTION.
10. NUMBER OF POSITIONS MAY BE AS HIGH AS -75 FOR SAMTEC
MANUFACTURING ONLY.
INSULATOR:
NO.
DWG. FTMH-1XX-XX-XX-DV-XX
BLACK, LCP, UL-94-V-0
TERMINAL:
PHOSPHOR BRONZE
PURVIS
04/22/96
SHEET 1 OF 6
BY:
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
REVISION BJ
(NO OF POSITIONS + 2) x .03937[1.0000]±.008[0.20]
C
.170 4.32
REF
.206 5.24 REF
ES-FTMH
.128 3.25 REF
.151 3.84
C
SNAP ON END
SHROUDS
.205 5.21
(No OF POS + 2) x .03937[1.0000] ±.0100[0.25]
(No OF POS x .03937[1.0000] + .021[0.52] REF
C
+.003 [0.08]
(No OF POS - 1) x .03937[1.0000]
- .001 [0.03]
.173 4.39 REF
FTMH-75-ES-XX
.0820 2.083
REF
.1525 3.874
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
MOLDED TO POSITION END
SHROUDS
*
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail: info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code: 55322
FIG 2
-ES: END SHROUDS
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
FTMH-112-02-X-DV-ES SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
DWG.
NO. FTMH-1XX-XX-XX-DV-XX
SHEET 2 OF 6
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
PURVIS
04/22/96
REVISION BJ
THEORETICAL
CUT LINES
FTMH-105-XX-XX-DV-ES SHOWN (BEFORE CUT)
THEORETICAL CUT LINES
FTMH-110-XX-XX-DV-ES SHOWN (BEFORE CUT)
THEORETICAL CUT LINES
FTMH-113-XX-XX-DV-ES SHOWN (BEFORE CUT)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
DWG.
NO. FTMH-1XX-XX-XX-DV-XX
SHEET 3 OF 6
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
PURVIS
04/22/96
NOTE
REVISION BJ
"M" = USED MEASURED DIMENSION (REF)
"P" = (("M" - .200[5.08]) / 2) ±.020[.51]
"B" REF
(SEE TABLE 3)
"M"
(SEE NOTE)
C
.200 5.08
REF
"P"
(SEE NOTE)
C
L
.125 3.18
TABLE 3
FIG 3
-P: PICK & PLACE PAD
FTMH-125-03-X-DV-P SHOWN
PAD
"B"
PPP-30
.125[3.18]
.190[4.83]
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
PPP-30-NT
C
NO OF POS x .03937[1.0000] + .216[5.48]±.008[0.20]
NO OF POS x .03937[1.0000] + .137[3.47] REF
FTMH-EP
.075 1.91
C
L
REF
.122 3.10
REF
.250 6.35
REF
C
.273 6.94
FIG 4
.170 4.32 REF
.275 6.99 REF
-EP: GUIDE POST
FTMH-125-03-X-DV-EP SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
NO OF POS x .03937[1.0000] + .160[4.07]±.008[0.20]
.170 4.32
REF
FTMH-EC
.128 3.25 REF
C
.151 3.84
LC-05-TM
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
.070 1.78
C
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
NO OF POS x .03937[1.0000] + .110[2.84]±.008[0.20]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
.056 1.42 REF
FIG 5
-EC: LOCKING CLIP
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
DWG.
FTMH-125-03-X-DV-EC SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NO. FTMH-1XX-XX-XX-DV-XX
PURVIS
04/22/96
SHEET 4 OF 6
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
REVISION BJ
(No OF POS -2) x .03937[1.0000]±.005[0.13]
SM-A7H
FTMH-60-D
FIG 6
-A: ALIGNMENT PIN (STAKED)
(MIN 7 POSITIONS)
.028 0.71
C
.025 0.64
REF
FTMH-125-03-X-DV-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.037 0.94 REF
.025 0.64
FTMH-75-D-XX
(No OF POS -2) x .03937[1.0000] REF
FIG 7
-A: ALIGNMENT PIN (MOLDED)
(MIN 3 POSITIONS)
.025 0.64
REF
FULL RADIUS
FTMH-125-03-X-DV-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
TABLE 2
(SEE NOTE 5 FOR PACKAGING NOTES)
LEAD STYLE
OPTION (S)
PACKAGING TUBE
TUBE PLUG
-02, -03
-02, -03
-02, -03
-02, -03
-02, -03
-02, -03
-NONE
-A
-P, -A-P
PT-1-24-01-60
PT-1-24-01-60
PT-1-24-01-60
PT-1-24-01-63
PT-1-24-01-60
PT-1-24-02-15
TP-03 (x 2)
TP-03 (x 2)
TP-03 (x 2)
TP-24 (x 2)
TP-03 (x 2)
TP-03 (x 2)
-ES, -ES-P, -ES-A
-EC, -EC-P, -EC-A
EP, -EP-A, -EP-A-P
-ES-P OPTION
PT-1-24-01-63
-A OPTION
PT-1-24-01-60
-EC OPTION
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
PT-1-24-01-60
-EP, -EP-A & -EP-A-P OPTION
PT-1-24-02-15
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
PACKAGING VIEWS
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
DWG.
NO. FTMH-1XX-XX-XX-DV-XX
PURVIS
04/22/96
SHEET 5 OF 6
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
REVISION BJ
"A"- .038 0.97
FTMH-75-D
.800 20.32
"A" - .038 0.97
"A" - .038 0.97
.125±.010 3.18±0.25
.050±.005 1.270±0.127
IN PROCESS 3
IN PROCESS 2
W/O -A PINS
W/O -A PINS
IN PROCESS 1
W/O -A PINS
FTMH-75-D-XX
"A"-.053 1.35
"A"-.053 1.35
"A"-.053 1.35
.800 20.32
.135±.010 3.43±0.25
.065±.005 1.651±0.127
IN PROCESS 3
IN PROCESS 2
WITH -A PINS
WITH -A PINS
IN PROCESS 1
WITH -A PINS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail: info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code: 55322
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
FTMH-1XX-XX-XX-DV-XX
F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW
BY:
PURVIS
04/22/96
SHEET 6 OF 6
相关型号：
FTMH-137-03-L-DV-A
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
FTMH-137-03-L-DV-EC-A
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-137-03-L-DV-EC-TR
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-137-03-L-DV-EP-TR
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-137-03-L-DV-ES-TR
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-137-03-LM-DV
Board Connector, 74 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
FTMH-138-02-F-DH-EC-TR
Board Connector, 76 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-138-02-F-DH-EP-K
Board Connector, 76 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-138-02-F-DH-ES-K
Board Connector, 76 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
FTMH-138-02-F-DH-ES-TR
Board Connector, 76 Contact(s), 2 Row(s), Male, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
SAMTEC
©2020 ICPDF网 联系我们和版权申明