FTSH-114-01-LTL-D-FC [SAMTEC]
Board Connector;
| 型号： | FTSH-114-01-LTL-D-FC |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector |
| 文件： | 总3页 (文件大小：174K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FTSH-1XX-XX-XX-D-XX-XX
NOTES:
REVISION BJ
C
1.
REPRESENTS A CRITICAL DIMENSION.
No OF POSITIONS
-02 THRU -50
OPTIONS
2. TERMINALS TO BE SHEARED TO MEET DIMENSION SPECIFICATION.
3. PARTS MAY BE CUT TO POSITION.
4. MINIMUM PUSHOUT FORCE: .5 LB.
-ES: END SHROUDS
(PER ROW)
(-02 & -03 LEAD STYLE ONLY- SEE FIG 2, SHT 2)
(9 POS PER ROW MIN)
(MUST USE FTSH-50-D)
5. EJ OPTION IS NOT AVAILABLE AS OF REVISION AG.
APPLICABLE VIEWS ARE REMAINING FOR REFERENCE TO BUILD
INTERNAL ASP ORDERS ONLY. THIS OPTION WAS FOR EXISTING
BUSINESS ONLY. ANY EXISTING CUSTOMERS WILL HAVE PART
NUMBERS SETUP AS INTERNAL ASP'S.
LEAD STYLE
-01: .120 [3.05]
-02: .075 [1.91]
-03: .065 [1.65] MIN
-04: .150 [3.81]
-EL: SHROUD LOCK
(-02 & -03 LEAD STYLE ONLY- SEE FIG 4, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
DO NOT
SCALE FROM
THIS PRINT
6. MAX BURR ALLOWANCE: .003" [.08"]
7. MAX CUT FLASH: .010 [.25]
PLATING SPECIFICATION
-EP: GUIDE POST
8. MAX HEIGHT VARIATION BETWEEN ROWS: .005 [.13]
(-02 & -03 LEAD STYLE ONLY- SEE FIG 5, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
-EJ: EJECTOR SHROUD
No OF POS x .0500 [1.270] - .003 [.08] ± .006 [.15]
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(SEE FIG 3, SHT 2)
No OF POS x .0500 [1.270] - .0500 [1.270]
(SEE NOTE 5)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(MUST USE FTSH-50-D)
-K: KEYING SHROUD
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(-01 LEAD STYLE ONLY- SEE FIG 1, -K OPTION)
(POS 05, 08, 10, 13, 15, 17, 20, 25 ONLY)
(USE ONLY WITH -RA TAIL OPTION)
(MUST USE FTSH-XX-CN-XX)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
50
49
02
01
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.050 1.26
TAIL OPTION
-RA: RIGHT ANGLE
-FC: FLEX CARD (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
-FE: FLEX CARD ELEVATED (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
90 / 10 ± 5% TIN LEAD ON TAIL
.135 3.43
REF
ROW SPECIFICATION
-D: DOUBLE ROW
(USE **FTSHC-1XX-XX-XXX-D-RA UNLESS
OPTION IS SPECIFIED, THEN USE BODY
CALLED OUT UNDER OPTION AND BUILD
PER PRINT. SEE OPTIONS FOR BODY
CALLOUT)
2
MAX SWAY
(EITHER DIRECTION)
** = SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS
MAX SWAY
(EITHER DIRECTION)
.016 0.41 SQ
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
2
.200 5.08 REF
C
PIN #1
(SEE TABLE 3)
NOTCH TO
BE ORIENTED
AWAY FROM
-RA TAILS
CONTACT
AREA
90°±3°
C
"A"
PIN #2
(SEE TABLE 1 & NOTE 8)
(SEE TABLE 3)
"B"
(SEE TABLE 2
& SEE NOTE 2)
FTSHC-50-D
.099 2.51
REF
C
FTSH-XX-CN-XX
.050 1.27
C
.050 1.27
"B"
(SEE TABLE 2
& SEE NOTE 2)
FIG 1
FTSHC-1XX-XX-XXX-D-RA SHOWN
-RA OPTION SHOWN
-K OPTION SHOWN
(SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS)
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
1
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005 [.13]
.XXXX: .0010 [.025]
SHEET SCALE: 5:1
MATERIAL:
DO NOT SCALE DRAWING
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
INSULATOR: BLACK LIQUID CRYSTAL POLYMER
TERMINAL: PHOSPHOR BRONZE, ALLOY No. 510
NO.
DWG. FTSH-1XX-XX-XX-D-XX-XX
08/17/1995
SHEET 1 OF 3
BY: BRATCHER
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
FIG 3
-EJ OPTION
REVISION BJ
FIG 2
(FOR EXISTING CUSTOMERS ONLY)
AVAILABLE IN LEAD STYLE -01 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE NOTE 5 ON SHEET 1)
-ES OPTION
AVAILABLE IN LEAD STYLE -02 & -03 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FTSH-50-D
FTSH-50-D
.222 5.65 REF
.091 2.31 REF
.188 4.78
REF
.139 3.53
REF
(No OF POS x .050[1.27])
+.061[1.55] ±.008[.20]
.265 6.73
REF
.188 4.78
REF
FTSH-ES
.440 11.18
REF
.168 4.27
REF
.178 4.51
.090 2.29
REF
USE FTSH-EJEHA SUB ASSEMBLY
(2 REQ'D PER ASSEMBLY - EACH
USES 1 EHA-02, 1 FTSH-EJ)
No OF POS x .050[1.27] + .621[15.77]
±.010[.25]
No OF POS x .050[1.27] + .231[5.87]
±.008[.20]
FIG 4
-EL OPTION
.188 4.78
REF
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
.330 8.38
.075 1.91
REF
REF
No OF POS x .050[1.27] + .257[6.53] REF
No OF POS x .050[1.27] + .153[3.89] REF
.188 4.78
REF
.120 3.05
FTSH-EP
.298 7.56
.125 3.18
REF
FTSH-EL
.303 7.68
.090 2.29 REF
No OF POS x .050[1.27] + .156[3.96] RE
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
PROPRIETARY NOTE
.090 2.29 REF
FIG 5
THIS DOCUMENT CONTAINS INFORMATION
No OF POS x .050[1.27] + .223[5.66]
±.008[.20]
-EP OPTION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 2)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
NO.
DWG. FTSH-1XX-XX-XX-D-XX-XX
08/17/1995
SHEET 2 OF 3
BY: BRATCHER
REVISION BJ
PACKAGING TUBES
PT-FTSH005-RA
PT-1-24-04-38
PT-FTSH008-RA-EX
-K
-RA
-ES
PT-1-24-06-40
PT-FTSH008-RA-EX
PT-FTSH008-RA-EX
-EP
-EL
-EJ
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
NO.
DWG.FTSH-1XX-XX-XX-D-XX-XX
08/17/1995 SHEET 3 OF
3
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
BY: BRATCHER
相关型号：
FTSH-114-01-LTL-D-LC
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator,
SAMTEC
FTSH-114-01-LTL-D-RA
Board Connector, 28 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
FTSH-114-01-LTL-DH
Board Connector, 28 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
FTSH-114-01-LTL-DH-TR
Board Connector, 28 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
FTSH-114-01-LTL-DV-P
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator,
SAMTEC
FTSH-114-01-LTL-DV-TR
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator,
SAMTEC
FTSH-114-01-S-D-FC
Board Connector, 28 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
FTSH-114-01-S-D-K
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator,
SAMTEC
FTSH-114-01-S-D-LC
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator,
SAMTEC
FTSH-114-01-S-DH
Board Connector, 28 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明