FTSH-120-01-F-D-RA [SAMTEC]
CONN HEADER 40POS DUAL .05" R/A;
| 型号： | FTSH-120-01-F-D-RA |
| 厂家： | 
SAMTEC |
| 描述： | CONN HEADER 40POS DUAL .05" R/A |
| 文件： | 总3页 (文件大小：306K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FTSH-1XX-XX-XX-D-XX-XX
NOTES:
REVISION BQ
C
1.
REPRESENTS A CRITICAL DIMENSION.
No OF POSITIONS
-02 THRU -50
OPTIONS
2. TERMINALS TO BE SHEARED TO MEET DIMENSION SPECIFICATION.
3. PARTS MAY BE CUT TO POSITION.
4. MINIMUM PUSHOUT FORCE: .5 LB.
-ES: END SHROUDS
(PER ROW)
(-02 & -03 LEAD STYLE ONLY- SEE FIG 2, SHT 2)
(9 POS PER ROW MIN)
(MUST USE FTSH-50-D)
5. EJ OPTION IS NOT AVAILABLE AS OF REVISION AG.
APPLICABLE VIEWS ARE REMAINING FOR REFERENCE TO BUILD
INTERNAL ASP ORDERS ONLY. THIS OPTION WAS FOR EXISTING
BUSINESS ONLY. ANY EXISTING CUSTOMERS WILL HAVE PART
NUMBERS SETUP AS INTERNAL ASP'S.
LEAD STYLE
-01: .120 [3.05]
-02: .075 [1.91]
-03: .065 [1.65] MIN
-04: .150 [3.81]
-EL: SHROUD LOCK
(-02 & -03 LEAD STYLE ONLY- SEE FIG 4, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
6. MAX BURR ALLOWANCE: .003" [.08"]
7. MAX CUT FLASH: .010 [.25]
-EP: GUIDE POST
PLATING SPECIFICATION
DO NOT
SCALE FROM
THIS PRINT
8. MAX HEIGHT VARIATION BETWEEN ROWS: .005 [.13]
(-02 & -03 LEAD STYLE ONLY- SEE FIG 5, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
+.005 [0.13]
- .010 [0.25]
No OF POS x .0500 [1.270] - .003 [.08]
-EJ: EJECTOR SHROUD
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(SEE FIG 3, SHT 2)
(SEE NOTE 5)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
No OF POS x .0500 [1.270] - .0500 [1.270]
(MUST USE FTSH-50-D)
-K: KEYING SHROUD
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(-01 LEAD STYLE ONLY- SEE FIG 1, -K OPTION)
(POS 05, 08, 10, 13, 15, 17, 20, 25 ONLY)
(USE ONLY WITH -RA TAIL OPTION)
(MUST USE FTSH-XX-CN-XX)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
50
49
02
01
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.050 1.26
TAIL OPTION
-RA: RIGHT ANGLE
-FC: FLEX CARD (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
-FE: FLEX CARD ELEVATED (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
90 / 10 ± 5% TIN LEAD ON TAIL
.135 3.43
REF
ROW SPECIFICATION
-D: DOUBLE ROW
2
MAX SWAY
(EITHER DIRECTION)
.016 0.41 SQ
REF (TYP)
2
MAX SWAY
2
MAX SWAY
.200 5.08 REF
(EITHER DIRECTION)
(EITHER DIRECTION)
C
PIN #1
(SEE TABLE 3)
CONTACT
AREA
90°±3°
C
KEYING NOTCH
TO BE LOCATED
THIS SIDE, AWAY
FROM -RA TAILS
"A"
PIN #2
(SEE TABLE 3)
(SEE TABLE 1 & NOTE 8)
"B"
(SEE TABLE 2
& SEE NOTE 2)
FTSH-50-D
.099 2.51
REF
C
FTSH-XX-CN-XX
.050 1.27
C
C
.050 1.27
"B"
(SEE TABLE 2
& SEE NOTE 2)
FIG 1
FTSH-1XX-XX-XXX-D-RA SHOWN
-RA OPTION SHOWN
-K OPTION SHOWN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [.3]
1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
.XXXX: .0010 [.025]
code 55322
SHEET SCALE: 5:1
MATERIAL:
DO NOT SCALE DRAWING
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
INSULATOR: BLACK LIQUID CRYSTAL POLYMER
TERMINAL: PHOSPHOR BRONZE, ALLOY No. 510
NO.
DWG. FTSH-1XX-XX-XX-D-XX-XX
08/17/1995
SHEET 1 OF 3
BY: BRATCHER
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
FIG 3
-EJ OPTION
REVISION BQ
FIG 2
(FOR EXISTING CUSTOMERS ONLY)
AVAILABLE IN LEAD STYLE -01 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE NOTE 5 ON SHEET 1)
-ES OPTION
AVAILABLE IN LEAD STYLE -02 & -03 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FTSH-50-D
FTSH-50-D
.222 5.65 REF
.091 2.31 REF
.188 4.78
REF
.139 3.531
REF
(No OF POS x .050[1.27])
+.061[1.55] ±.008[.20]
C
.188 4.78
REF
.245 6.22
REF
FTSH-ES
.440 11.18
REF
.168 4.27
.178 4.51
REF
USE FTSH-EJEHA SUB ASSEMBLY
(2 REQ'D PER ASSEMBLY - EACH
USES 1 EHA-02, 1 FTSH-EJ)
.090 2.296
REF
No OF POS x .050[1.27] + .621[15.77]
±.010[.25]
No OF POS x .050[1.27] + .231[5.87]
±.008[.20]
FIG 4
-EL OPTION
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
.188 4.78
REF
.330 8.38
.075 1.91
REF
REF
No OF POS x .050[1.27] + .257[6.53] REF
No OF POS x .050[1.27] + .153[3.89] REF
.188 4.78
REF
FTSH-EP
.120 3.05
.298 7.56
.125 3.18
REF
FTSH-EL
.303 7.68
.090 2.29 REF
No OF POS x .050[1.27] + .156[3.96] REF
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
.090 2.29 REF
FIG 5
No OF POS x .050[1.27] + .223[5.66]
±.008[.20]
-EP OPTION
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 2)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
NO.
DWG. FTSH-1XX-XX-XX-D-XX-XX
08/17/1995
SHEET 2 OF 3
BY: BRATCHER
REVISION BQ
PACKAGING TUBES
PT-1-24-03-38
PT-FTSH005-RA
PT-FTSH008-RA-EX
-K
-RA
-ES
PT-1-24-06-40
PT-FTSH008-RA-EX
PT-FTSH008-RA-EX
-EP
-EL
-EJ
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
NO.
DWG.FTSH-1XX-XX-XX-D-XX-XX
08/17/1995 SHEET 3 OF
3
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
BY: BRATCHER
相关型号：
©2020 ICPDF网 联系我们和版权申明