FTSH-145-02-SM-DH-C [SAMTEC]

Board Connector, 90 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal,;


型号：	FTSH-145-02-SM-DH-C
厂家：	SAMTEC
描述：	Board Connector, 90 Contact(s), 2 Row(s), Male, Right Angle, Surface Mount Terminal, PC 连接器
文件：	总3页 (文件大小：193K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NOTES:

REVISION BH

FTSH-1XX-XX-XXX-DH-XX

No OF POSITIONS

-02 THRU -50

(PER ROW)

REPRESENTS A CRITICAL DIMENSION

PATENT NUMBERS

5713755 / 5961339

2. MINIMUM PUSH OUT FORCE: .5 LB.

OPTIONS

3. MAXIMUM BURR ALLOWED: .002[.05].

-TR: TAPE AND REEL

4. MAXIMUM CUT FLASH ALLOWED IN NON- CRITICAL AREA: .010[.25],

NO CUT FLASH ALLOWED IN CRITICAL AREAS AS SHOWN.

5. MAXIMUM HEIGHT VARIATION .005[.13] BETWEEN ROWS.

6. APPLIES TO FIRST AND LAST PIN OF EACH ROW.

-A: ALIGNMENT PIN

(SEE FIG 2, SHEET 2 & FIG 3, SHEET 3)

(MOLDED TO POSITION

OR STAKED)

LEAD STYLE

-01: .120 [3.05]

-02: .075 [1.91]

-04: .150 [3.81]

(SAMTEC DISCRETION WHICH

-A PIN IS USED)

(STAKED 8 POSITION MIN. SEE FIG 3,

SHEET 3, USE FTSH-XX-DH)

(MOLDED 5 POSITION MIN. SEE FIG 2,

SHEET 2, USE FTSH-XX-DH-AXX)

-C: POLYIMIDE FILM

PLATING SPECIFICATION

-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

(SEE FIG 4, SHEET 3)

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-H: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

TAIL OPTION

-DH: DOUBLE HORIZONTAL

(USE **FTSHC-1XX-XX-XXX-DH UNLESS -A

OPTION IS SPECIFIED, THEN USE FTSH-XX-DH-XX

AND BUILD PER PRINT)

-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

** = SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR

DETAILS

-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,

TIN/LEAD (90/10+/-5%) TAIL

-G: 10µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

.000±.002 0.01±0.05

(SEE NOTE 6)

.006[0.15]

(TAILS ONLY)

DETAIL 'B'

SCALE 20 : 1

.005[0.13]

(No OF POS x .0500[1.270])

.010[0.25]

.099 2.51 REF

No OF POS x .0500[1.270] - .0500[1.270]

SEE NOTE 4

"A"

MAX SWAY

'B'

(EITHER DIRECTION)

T-1S15-03-XX

SEE NOTE 3

.0500 1.27

.135 3.43 REF

.006 [0.15]

.032 0.82

01 03

CRITICAL AREA

(SEE NOTE 4)

FTSHC-50-D

.016 0.41 SQ REF (TYP)

MAX SWAY

(EITHER DIRECTION)

.21 5.3

PROPRIETARY NOTE

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXX: .005 [.13]

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

.XXXX: .0020 [.051]

code 55322

SHEET SCALE: 4:1

MATERIAL:

DO NOT SCALE DRAWING

.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP

INSULATOR:

LCP, UL 94-V0 COLOR: BLACK

TERMINAL:

NO.

^DWG.FTSH-1XX-XX-XXX-DH-XX

FIG 1

PHOSPHOR BRONZE, ALLOY No. 510, GRADE A, FED. SPEC.

QQ-B-750, SPRING TEMPER

FTSHC-1XX-XX-XXX-DH SHOWN

(SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS

01/04/1995

SHEET 1 OF 3

BY: BRATCHER

F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW

REVISION BH

.099 2.51 REF

"A"

(SEE TABLE 1)

.102 2.59

IN-PROCESS 1

.099 2.51 REF

"A"

'C'

(SEE TABLE 1)

+.003

-.001

+0.08

0.01

-0.03

.000

.006 [0.15]

(TAILS ONLY)

.022 0.56 REF

.09 2.3

IN-PROCESS 2

.099 2.51 REF

"A"

(SEE TABLE 1)

FTSH-XX-DH-XX

.245 6.22

IN-PROCESS 3

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

.035 0.89 REF

(No OF POS - 2) x .050 [1.27] REF

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.040 1.02 REF

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP

FIG 2

-A: ALIGNMENT PIN (MOLDED) OPTION

DIFFERENT AS SHOWN, OTHERWISE

SAME AS FIG 1

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

DWG. NO.

FTSH-1XX-XX-XXX-DH-XX

01/04/1995

BY: BRATCHER

SHEET 2 OF 3

F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW

REVISION BH

SM-A9H

.040 1.02

.035 0.89

REF

(No OF POS - 2) x .050 [1.27] REF

FIG 3

-A: ALIGNMENT PIN (STAKED) OPTION

DIFFERENT AS SHOWN, OTHERWISE

SAME AS FIG 2

"R" (SEE NOTE)

"S" (SEE NOTE)

.140 3.56

.049±.010 1.24±0.25

.197±.010 5.00±0.25

NOTE: "R" = USED MEASURED DIMENSION (REF)

"S" = (("R" - .1969 [5.001]) / 2) ±.020 [.51]

FIG 4

-C: POLYIMIDE FILM

PT-FTSH001-DH

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

PACKAGING NOTES:

1. PACKAGE POSITIONS 10 THROUGH 50 IN TUBES.

2. POSITIONS 02 THROUGH 09 ARE TO BE

LAYER PACKAGED. EXCEPT FOR -C OPTION,

TUBE POSITIONS 05 THROUGH 50.

3. ALL PART POSITIONS 05 THROUGH 50 USE

PT-FTSH001-DH.

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

DESCRIPTION:

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP

DWG. NO.

4. USE TP-24 PLUG.

FTSH-1XX-XX-XXX-DH-XX

BRATCHER 01/04/1995 SHEET 3 OF 3

PACKAGING VIEW

F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW

BY:

FTSH-145-02-SM-DH-C [SAMTEC]

相关型号：

FTSH-145-02-SM-DH-TR

FTSH-145-02-SM-DV-TR

FTSH-145-02-SM-MT

FTSH-145-02-SM-MT-TP

FTSH-145-02-SM-MT-TR

FTSH-145-03-F

FTSH-145-03-F-D-RA

FTSH-145-03-F-D-RA-ES

FTSH-145-03-F-DH-P

FTSH-145-03-F-DV-A

FTSH-145-03-F-DV-A-P-TR

FTSH-145-03-F-DV-EC