FW-05-05-G-D-300-185 [SAMTEC]
Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,;
| 型号： | FW-05-05-G-D-300-185 |
| 厂家： | 
SAMTEC |
| 描述： | Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, 连接器 |
| 文件： | 总3页 (文件大小：283K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NOTES:
REVISION CR
FW-XX-XX-XX-D-XXX-XXX-XX
PATENT NUMBERS
5713755 / 5961339
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE SHALL BE 1 LB.
3. GOLD AREA TO APPEAR ON POST.
4. TAILS TO BE SHEARED TO DIMENSION SHOWN.
(FOR HAND TOOLING ONLY)
POSITION SPEC
No. OF POS PER ROW
-02 THRU -50
DO NOT
SCALE FROM
THIS PRINT
OPTION
-P: PICK & PLACE PAD (USE PPP-25)
(USE PPP-25-NT WITH -TR ONLY)
(SEE FIG. 3, SHT 2)(5 POS. MIN)
-TR: TAPE & REEL
5. TO BE VALID ALL PART NUMBERS MUST MEET THE
FOLLOWING PARAMETERS: THE BOARD SPACE
RANGE, POST HEIGHT MIN. AND BOARD + POST
COMBINATION FOR EACH STYLE.
LEAD STYLE
-03: USE T-1S15-XX-X
-05: USE T-1S15-XX-X
(SEE TABLE 1)
.740[18.80] MAX OVERALL HEIGHT AVAILABLE FOR
-TR. MAX OVERALL HEIGHT = POST + BOARDSPACE
+ PAD + ALIGNMENT PIN = .740[18.80]
-ES: END SHROUDS (SEE FIG. 5, SHT 2)
(9 POS PER ROW MIN)
6. MAXIMUM BURR: .003[0.08] ON CUT TAIL.
7. MAXIMUM CUT FLASH TO BE .010[0.25] ON CRITICAL
AREAS AS SHOWN.
PLATING
8. AVAILABLE ONLY W/BOARD SPACE .215[5.46]
TOP .610[15.49].
-G: 10µ" GOLD IN CONTACT AREA,
(MAX POST: .075[1.91])
3µ" GOLD ON TAIL
(SEE NOTE 8)
9. PARTS TO BE ASSEMBLED WITH ALIGNMENT HOLES
(IN BODY) FACING THE TAILS
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-EP: GUIDE POST (FIG. 6, SHT 3)
(9 POS PER ROW MIN)
10. LOWER BODY MAY BE BLACK OR WHITE.
11. FILL BODY SO THAT THE LEAD IN OF THE CORE IS
ON THE TAIL SIDE.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
(MAX POST: .075[1.91])
(USE ONLY WHEN MATING WITH CLP)
(SEE NOTE 8)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-A: ALIGNMENT PIN (MOLDED OR STAKED, SAMTEC'S
DISCRETION ON WHICH)
12. MAXIMUM HEIGHT VARIATION BETWEEN ROWS: .005[0.13].
13. FOR ADDED MECHANICAL STABILITY, SAMTEC
RECOMMENDS MECHANICAL BOARD SPACERS
BE USED IN APPLICATIONS WITH GOLD OR SELECTIVE
GOLD PLATED CONNECTORS. CONTACT
IPG@SAMTEC.COM FOR MORE INFORMATION.
14. SUB-FW-50-03-XX-D-280-015 TO USE T-1S15-08,
SUB-FW-50-05-XX-D-400-065 TO USE T-1S15-03.
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
(SEE FIG. 7 & 8 SHT 3)
(STAKED: 6 POS. MIN)(MOLDED: 3 POS. MIN)
(SEE NOTE 8)
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
POST HEIGHT (SEE NOTE 5)
.065[1.65] MIN
POST + BOARD SPACE = "F" =
-03: .150-.400 [3.81-10.16]
*.401-.675 [10.19-17.15]
-05: *150-.400 [3.81-10.16]
.401-.675 [10.19-17.15]
C
(NO OF POSITIONS X .050[1.27]) ±.010[0.25]
L
02
50
DOUBLE ROW
(SEE TABLE 1 FOR BODY STYLE)
BOARD SPACE OPTION (SEE NOTE 5)
SEE TABLE 1
-03 LEAD STYLE (.085[2.16 MIN - .335[8.51] MAX)
-05 LEAD STYLE (.248[6.30] MIN - .610[15.49] MAX)
MAX = "A" - POST (SEE TABLE 1)
C
.135 3.43 REF
L
* = FOR EXISTING CUSTOMERS ONLY
.050 1.27 REF
SEE NOTE 7
POST HEIGHT
(SEE NOTE 12)
01
49
.050 1.27 REF
MAX SWAY
.070 1.78 REF
(CONTACT AREA)
.016 0.41
SQ REF (TYP)
2
(EITHER DIRECTION)
.034 0.86 REF
90°±4°
C
"F"
"A" ±.005[0.13]
(BOARD SPACE)
FTS-XX-DV
C
T-1S15-XX-X
02-30POS. = .004[.010]
31-50 POS. = .006[0.15]
+.005
-.000
1.27+0.13
C
.050
0.00
SEE NOTE 7
C .229±.010 5.82±0.25
(SEE NOTE 4)
PROPRIETARY NOTE
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
FIG 1
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
5
.XX: .01[0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005[0.13]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
.XXXX: .0020[0.051]
code 55322
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
BODY: LCP, UL 94 VO, COLOR: FTS-50-DV & FTSH-50-D: BLACK .050 x .050 SURFACE MOUNT BOARD SPACERS
FW-50-D: NATURAL
DWG. NO.
TERMINAL: PHOS BRONZE
FW-XX-XX-XX-D-XXX-XXX-XX
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
SHEET 1 OF 3
BY:
BRATCHER 11-03-1994
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
IN-PROCESS 3
REVISION CR
IN-PROCESS 2
IN-PROCESS 1
.248[6.30] - .610[15.49]
.248[6.30] - .610[15.49]
FTSH-XX-D
.065 1.65 MIN
(SEE NOTE 12)
.065 1.65 MIN
(SEE NOTE 12)
.065 1.65 MIN
(SEE NOTE 12)
.099 2.51
REF (TYP)
.099 2.51
REF (TYP)
.099 2.51
REF (TYP)
BOARD SPACE - .050[1.27]
"F"
"F"
+.005
-.000
.149
3.78+0.13
+.005
-.001
+0.13
2.92
-0.03
0.00
C
.115
.125±.010 3.18±0.25
(SEE NOTE 4)
FTSH-XX-D
.229±.010 5.82±0.25
.229±.010 5.82±0.25
T-1S15-03-X
NOTE: SHEAR TAILS TO DIM SHOWN.
FIG 4
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
.215[5.46] - .335[8.51]
.065 1.65 MIN
No OF POSITIONS x .050[1.27] + .101[2.57] 34.32 ±.008[.20]
(SEE NOTE 12)
.188 4.78 REF
.099 2.51
REF (TYP)
FTSH-XX-D
"F"
.265 6.73 REF (TYP)
ES-FTSH
T-1S15-03-X
FW-XX-D
.168 4.27
REF
+.005
-.000
.115
2.92+0.13
0.00
"C"
+.005
-.000
.115
2.92+0.13
0.00
FIG 5
SCALE 2:1
FIG 2
-ES OPTION
(BKT MACHINE)
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
9 POSITION MINIMUM (SEE NOTE 8)
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
((NO OF POS X .025[.635] - .100[2.54])±.010[.25]
.200 5.08 REF
"E" REF
.160 4.06 REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
.317 8.05 REF
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 x .050 SURFACE MOUNT BOARD SPACERS
SHOWN WITH LEAD STYLE -03
DWG.FW-XX-XX-XX-D-XXX-XXX-XX
FIG 3
NO.
(PICK AND PLACE PAD)
(5 POSITION MINIMUM)
BRATCHER 11-03-1994
SHEET 2 OF 3
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
BY:
REVISION CR
IN-PROCESS FOR FIG 1
FTSH-50-D
(FOR HAND FILL ONLY)
(HAND TOOL & M30 MACHINE FW-50-D)
FW-50-D-XX
(BKT MACHINE)
T-1S15-03-X
FTSH-50-D
FTS-XX-DV
.100 2.54
.125±.010 3.18±0.25
+.005
-.000
.115
2.92+0.13
0.00
+.005
-.000
1.27+0.13
C
.050
.050 1.27 REF
0.00
IN-PROCESS 1
IN-PROCESS 2
(SEE NOTE 4)
IN-PROCESS 3
.034 0.86
FULL RADIUS
(No OF POS-2) x .050[1.27]
.035 0.89
FIG 7
FIG 6
-EP OPTION
-A OPTION (MOLDED)
MOLD 3 POSITION MIN
DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1
USE ONLY WHEN MATING TO CLP
(9 POSITION MIN)
(SEE NOTE 8)
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
FTSH-50-D
(No OF POSITIONS x .050[1.27] + .156[3.96])±.008[.20]
.188 4.78 REF
(HAND TOOL & M30 MACHINE FW-50-D)
FW-50-D-XX
(BKT MACHINE)
T-1S15-03-X
FTSH-50-D
(No OF POSITIONS x .050[1.27] + .231[5.87]])±.008[.20]
.075 1.91
REF (TYP)
.330 8.38 REF (TYP)
+.005
.115
2.92+0.13
-.000
0.00
FTSH-EP
.120 3.05
REF (TYP)
SM-A9H
"D"
(No OF FINISHED POS
PER ROW - 2) x.050[1.27]
.034 0.86 REF
C
.035 0.89 REF
+.005
-.000
.115
2.92+0.13
0.00
FIG 8
-A OPTION (STAKED)
6 POSITION MIN
DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 x .050 SURFACE MOUNT BOARD SPACERS
DWG. NO.
FW-XX-XX-XX-D-XXX-XXX-XX
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
BY:
BRATCHER 11-03-1994
SHEET 3 OF 3
相关型号：
FW-05-05-G-D-300-188-A-P-TR
Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
FW-05-05-G-D-305-160
Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal,
SAMTEC
©2020 ICPDF网 联系我们和版权申明