HCSD-32-S-03-01-T-N-O [SAMTEC]
Interconnection Device;型号: | HCSD-32-S-03-01-T-N-O |
厂家: | SAMTEC |
描述: | Interconnection Device 连接器 互连器件 |
文件: | 总2页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
F-203 SUPPLEMENT
HCMD–07–S–03–02–T
HCMD, HCMS
.100" IDC CABLE STRIPS HCSD, HCSS
Mates with:
TSW, MTSW, TST, EW,
BST, LCW, ZST, MTLW,
TSM
NO. PINS
PER ROW
END
ASSEMBLY
TYPE
STRIP
ROW OPTION
Features:
• Low Profile
= Single
S
–05, –07, –08, –10,
–12, –13, –15,
–17, –20, –25, –30,
–32, –36
• Skinny side locks
• Dual beam contacts
• Single & double row
• High temp insulator
• Odd lead counts
• Customs our specialty
• Easy assembly
= Double
D
(Color coded cable
N/A for 31 thru 36
pins/row. See
(Call Samtec other sizes)
–G option.)
Specifications:
HCSD, HCSS
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
= Male Strip
= Single End
HCM
–S
Insulation Resistance:
5000 MΩ
(3,30)
.130
(5,08)
.200
No. of Positions x .100 (2,54)
+ .180 (4,57)
Temperature Range:
-65°C to +80°C
Withstanding Voltage:
1000 VRMS @ 60 Hz
Contact: Phosphor Bronze
Plating:
(7,87)
.310
REF
10µ" (0,25µm) on contact
area, 150µ" (3,81µm)
Sn on balance over
50µ" (1,27µm) Ni.
Socket or Male Plug on one end
Current Rating: 1A
Contact Resistance:
10 mΩ max
(3,05)
.120
(0,51)
.020
=
Double End
–D
Lead Size Range:
.024" (0,61mm) SQ to
.026" (0,66mm) SQ
Lead Insertion Depth:
.185" (4,70mm) to .250"
(6,35mm)
(2,54)
.100
(0,64)
.025
SQ
(2,54)
.100
Single
Double
(HCMD)
(HCMS)
TYP
Insertion Force:
Also Available (5,84mm) .230" tail length
specify Lead Style –02 instead of –01
6 oz avg (1,67N) average with
.025" (0,64mm) SQ probe
Withdrawal Force:
3 oz avg (0,83N) average with
.025" (0,64mm) SQ probe
Wire: 28 AWG 7/36 stranded
Tinned Copper
=
Socket Strip
HCS
Specifications:
HCMD, HCMS
(3,30)
.130
(5,08)
.200
Socket or Male Plug on each end
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
No. of Positions x .100 (2,54)
+ .180 (4,57)
=
Transfer End
Insulation Resistance:
5000 MΩ
–T
Temperature Range:
-65°C to +80°C
(9,53)
.375
REF
Withstanding Voltage:
1000 VRMS @ 60 Hz
Terminal: Phosphor Bronze
Plating:
(0,76)
.030
SQ. TYP.
Sn over 50µ" (1,27µm) Ni
Current Rating: 1A
Wire: 28 AWG 7/36 stranded
Tinned Copper
(2,54)
.100
(2,54)
.100
Single
(HCSS)
Double
(HCSD)
Male Plug on one end with socket on
other. Begin part number with HCM.
Note: IDC assemblies are
non-standard, non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without
WWW.SAMTEC.COM
SAMTEC USA • Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047 SAMTEC UK • Tel: 01236 739292 • Fax: 01236 727113 SAMTEC GERMANY • Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE • Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61 SAMTEC ITALY • Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ASIA PACIFIC • Tel: 65 6745-5955 • Fax: 65 6841-1502 SAMTEC CHINA • Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047 SAMTEC JAPAN • Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC TAIWAN • Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531 SAMTEC HONG KONG • Tel: 852-26904858 • Fax: 852-26904842 SAMTEC ANZ • Tel: 613 9512 7747 • Fax: 613 9512 7745
F-203 SUPPLEMENT
HCSD–12–S–03–01–T
HCMD, HCMS
.100" IDC CABLE STRIPS HCSD, HCSS
OTHER
OPTIONS
ASSEMBLED
LENGTH
PLATING
OPTION
NOTCH
POLARIZATION
01
–N
–“XX”
= Notch Polarization
= Assembled Length
10µ" (0,25µm)
02
Gold on contact area or tail,
Tin on balance
(1,27)
.050
=
–S
Assembled Length in
INCHES ( 1/8")
2 inches minimum
(Standard on HCSS & HCSD.
Leave blank)
01
(3,81) .150
Tin
Required for HCSS and HCSD.
(Not available on HCMS or HCMD, unless
Transfer, then only the socket is polarized.)
=
(Standard on HCMS & HCMD.
Leave blank)
–T
–P “XX”
–S “XX”
–ST “X”
–R
= Position Polarization
= Daisy Chain Single
= Stripped & Tinned
= Reversed
(50,80)
Specify Suffix from table. All
2.00
“XX” 1/8" (3,18)
1
dimensions are
/16" (1,59mm). Not
min.
available in 28 positions and higher.
Single Row
Connectors
01
02
04
01
03
02
03
Outer Most
(End of
Assembly)
04
(101,60)
4.00 minimum
7
When mating double row connector
with two single row connectors, the
outer most single will be connected
to Conductor #1 and the inside single
to Conductor #2.
1/8" (3,18)
–ST8
–ST4
–ST2
–ST3
1/4" (6,35)
Single
Double
–M
1/2" (12,70)
3/8" (9,53)
= Middle Reversed
6
Specify “XX” as position. For
Double the same position will be
3
–D “XX”
polarized on both ends. (Not
available on HCM, unless Transfer,
then only the socket is polarized)
= Daisy Chain, Double
–B “XX”
= Breakout
(50,80)
2.00
min.
“XX” 1/8" (3,18)
Specify “XX” as number of
conducts to be broken out.
Double Row
Strips
Requires –SXX, –WXX or –DXX
7
Outer Most
(End of
1
–O
“XX”
Assembly)
= Outside Reversed
(101,60)
4.00 minimum
(127,00)
–G
6
5.00 max.
(50,80)
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
= Gray Cable
2.00 min.
4
–W “XX”
= Wiring Reversed
Daisy Chain, Single
Standard cable is color coded. Specify
–G for Gray cable with one red edge.
–RW
= Reversed Wiring
Same as –S “XX” except outer strip
connected to conductor #2 and inside
Requires –SXX, –WXX or –DXX
strip connected to conductor #1.
#1 wire opposite position #1
2
7
6
5
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
SAMTEC USA • Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047 SAMTEC UK • Tel: 01236 739292 • Fax: 01236 727113 SAMTEC GERMANY • Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE • Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61 SAMTEC ITALY • Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ASIA PACIFIC • Tel: 65 6745-5955 • Fax: 65 6841-1502 SAMTEC CHINA • Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047 SAMTEC JAPAN • Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC TAIWAN • Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531 SAMTEC HONG KONG • Tel: 852-26904858 • Fax: 852-26904842 SAMTEC ANZ • Tel: 613 9512 7747 • Fax: 613 9512 7745
相关型号:
©2020 ICPDF网 联系我们和版权申明