HLE-124-02-L-DV-A-K-TR [SAMTEC]
.100 TIGER BEAM SOCKET ASSEMBLY;
| 型号： | HLE-124-02-L-DV-A-K-TR |
| 厂家： | 
SAMTEC |
| 描述： | .100 TIGER BEAM SOCKET ASSEMBLY |
| 文件： | 总2页 (文件大小：263K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION AW
HLE-1XX-02-XXX-DV-XX-XX-XX
OPTION
-TR: TAPE & REEL
(2 - 29 POSITIONS ONLY)
No OF POSITIONS
-02 THRU -50
DO NOT
SCALE FROM
THIS PRINT
(SEE NOTE 11)
-FR: FULL REEL QTY TAPE & REEL
(2-29 POSITIONS ONLY)
(SEE NOTE 12)
FIG 5
-BE OPTION
(SAME AS FIG 1 UNLESS OTHERWISE STATED)
(PER ROW)
LEAD STYLE
RHLE-50-DBE
-02: SURFACE MOUNT
OPTION
-P: PICK & PLACE PAD
(USE C-132-12-X)
(POS -03 THRU -50 ONLY)
-A: STAKED OR MOLDED ALIGNMENT PIN
(4 POS MIN)(SEE NOTE 13)
-LC: LOCKING CLIP (2 POS MIN)
(SEE NOTE 9)
C
PLATING SPECIFICATION
+.008 [0.20]
-.005
No OF POS x .100 [2.54]
[0.13]
-G: 20µ" GOLD IN CONTACT AREA
3µ" ON TAIL (USE C-132-12-G)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(USE C-132-12-S)
-K: USE K-DOT-.256-.375-.005
POLYIMIDE FILM PAD (AVAILABLE
ON POS -03 THRU -50; .005 [0.13]
THICKNESS)
({No of POS - 1} x .100 [2.54])
.005 [.13]
-F: 3µ" SELECTIVE FLASH GOLD IN CONTACT
AREA MATTE TIN ON TAIL
.100 2.54
REF
(USE C-132-12-F)
02
-L: 10µ" SELECTIVE LIGHT GOLD IN
CONTACT AREA MATTE TIN ON TAIL
(USE C-132-12-L)
(SEE FIG 4)
.200 5.08
REF
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL (USE C-132-12-H)
-STL: 30µ" SELECTIVE GOLD IN CONTACT
AREA TIN/LEAD (90%/10 +/-5%)
(USE C-132-12-STL)
OPTION
-BE: BOTTOM ENTRY
(USE RHLE-50-DBE)(SEE FIG 5)
(LEAVE BLANK FOR STANDARD)
01
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(USE C-132-12-S)
-FM: 3µ" SELECTIVE FLASH GOLD IN CONTACT
AREA MATTE TIN ON TAIL (USE C-132-12-F)
-LM: 10µ" LIGHT GOLD IN CONTACT AREA
MATTE TIN ON TAIL (USE C-132-12-L)
2
MAX SWAY
(TYP)
ROW SPECIFICATION
-DV: DOUBLE VERTICAL
(USE RHLE-50-D)
C-132-12-XXX
.020 0.51 REF
PATENT NUMBERS
5713755 / 5961339
RHLE-50-D
C
.259 6.58 REF
SEE NOTE 10
"A"
90°±3°
C
C
.144 3.66
SEE TABLE 2
SECTION "A"-"A"
NOTES:
"A"
FIG 1
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. ALL IDENTIFICATION MARKS MUST NOT STAND GREATER THAN .002 [0.05]
OFF THE SURFACE OF THE PART.
3. MINIMUM PULL OUT FORCE FOR -LC, -A, & CONTACT: 12 oz
HLE-116-02-XXX-DV SHOWN
4. COPLANARITY: SEE TABLE 2.
5. MAXIMUM BURR ALLOWANCE: .003[0.08]
6. CUT ASSEMBLIES AFTER FILL.
MAXIMUM CUT FLASH: .010 WITH NO FLASH ALLOWED IN HOLES OR EXTENDING BELOW LEADS.
WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP.
7. TUBE POSITIONS 03 THRU 50. LAYER PACKAGE POSITION 02.
FIG 2
8. ENDWALL THICKNESS: .030±.005[0.76±0.13] TO BE MEASURED FROM BOTTOM VIEW.
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT COMPATIBLE WITH AUTO
PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
10. SAMTEC LOGO MAY NOT BE PRESENT ON CUT TO POSITION CONNECTORS.
11. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING TO THE SAMTEC
PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM
12. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED ON OPTIONS SELECTED.
13. STAKED ALIGNMENT PIN USED AT SAMTEC'S DISCRETION.
-A & -LC OPTION
C
.050 1.27
(No OF POS -2) x.1000 [2.540]
C .050 1.27
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01 [.3]
3
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
SM-A10H
.0625 1.588
.XXX: .005 [.13]
LC-08-TM-01
.XXXX: .0020 [.051]
.010 0.25 REF
MATERIAL:
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
[2.54] .100 TIGER BEAM SOCKET ASSEMBLY
DWG. NO.
3
MAX SWAY
(TYP)
BODY: VECTRA E130i, UL94V-0
CONTACT: BeCu
3
MAX SWAY
(TYP)
HLE-1XX-02-XXX-DV-XX-XX-XX
F:\DWG\MISC\MKTG\HLE-1XX-02-XXX-DV-XX-XX-XX-MKT.SLDDRW
ED MESSER 12/19/98
SHEET 1 OF 2
BY:
REVISION AW
"R"
C
"S"
.280 7.11
.152 3.86
C
LMP-02
.225 5.72
NOTE: "R" = USE MEASURED DIM (REF)
"S" = {("R" - .225 [5.72])/2} .020 [0.51]
FIG 3
(-P: PICK AND PLACE PAD)
AVAILABLE ON POSITIONS 03 THRU 50
"R" (SEE NOTE)
C
"S"
.028±.020 0.71±0.51
(SEE NOTE)
.256 6.50
REF
C
.149 3.78
NOTE: "R" = USE MEASURED DIM (REF)
"S" = {("R" - .2559 [6.500])/2} .020 [0.51]
FIG 4
-K: POLYMIDE FILM PAD
AVAILABLE ON POS 03 THRU 50
F:\DWG\MISC\MKTG\HLE-1XX-02-XXX-DV-XX-XX-XX-MKT.SLDDRW
*
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
e-Mail: info@SAMTEC.com
DESCRIPTION:
FAX: 812-948-5047
code: 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 TIGER BEAM SOCKET ASSEMBLY
NO. HLE-1XX-02-XXX-DV-XX-XX-XX
DWG.
PT-1-24-10-63
PT-1-24-01-64
TUBE VIEWS
SHEET 2 OF 2
BY:
ED MESSER 12/19/98
相关型号：
HLE-124-02-L-DV-BE-K-TR
Board Connector, 48 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
SAMTEC
HLE-124-02-L-DV-TE
Board Connector, 48 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明