HPSTP-19-0500-S-SL [SAMTEC]
Interconnection Device, LEAD FREE;
| 型号： | HPSTP-19-0500-S-SL |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device, LEAD FREE 连接器 |
| 文件： | 总7页 (文件大小：1221K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION Q
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
HPSTP-XX-XXXX-XX-XX
Pb
SECOND END
No OF POSITIONS
-S: STANDARD PLUG
AVAILABLE FIRST END:
(19 AND 29 POSITION)
-S: STANDARD PLUG
-19: (5 SIG PAIRS/4 POWER LINES)
USES HDMIP-19 (SEE FIG. 1)
-29: (8 SIG PAIRS/6 POWER LINES)
USES HDMIP-29 (SEE FIG. 2)
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
FIRST END
-M: MINI PLUG
**
-S: STANDARD PLUG
AVAILABLE SECOND END:
(19 AND 29 POSITION)
-STANDARD PLUG
-M: MINI PLUG
AVAILABLE FIRST END:
(19 POSITION ONLY)
LENGTH *
(IN MILLIMETERS)
-M: MINI PLUG
-M: MINI PLUG
-SL: LOCKING STANDARD PLUG
AVAILABLE FIRST END:
(19 POSITION ONLY)
-0500 - 9999
AVAILABLE SECOND END:
(19 POSITION ONLY)
-M: MINI PLUG
*CONTACT SAMTEC FOR CUSTOM
LENGTHS.
-1000, 2000, 3000, AND 5000 IN STOCK
LENGTHS LONGER THAN 5000 NOT
SUPPORTED BY TEST DATA
-SL: LOCKING SECOND PLUG
-ML: LATCHING MINI PLUG
AVAILABLE FIRST END
(19 POSITION ONLY)
-S: STANDARD PLUG
**
-SL: LOCKING STANDARD PLUG
AVAILABLE SECOND END:
(19 POSITION ONLY)
-ML: LATCHING MINI PLUG
-SL: LOCKING SECOND PLUG
-ML: LATCHING MINI PLUG
AVAILABLE SECOND END
(19 POSITION ONLY)
** = NOT RELEASED FOR PRODUCTION
"D" REF
(SEE TABLE 1)
"E" REF (TYP)
-ML: LATCHING MINI PLUG
HDRL-11
(SEE NOTE 11)
1
2
DO NOT
SCALE FROM
THIS PRINT
18
19
2
1
LABEL-ET
(SEE NOTE 3)
FIG. 1
C2
"A"
HPSTP-19-XXXX-S-S SHOWN
C1
(SEE TABLE 1)
LENGTH 1%
(SEE CALLOUT)
"F" REF (TYP)
4.45 .175 REF.
NOTES:
"C" REF.
(SEE TABLE 1)
C
1.
REPRESENTS A CRITICAL DIMENSION.
C4
C3
2. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
3. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
STPC-XX-02-XXXX
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
4. WRAP ENDS IN BUBBLE WRAP AND PACKAGE IN CLEAR POLY BAGS.
5. SEE TABLE 2, 3, 4, & 5 FOR SIGNAL/GROUND/POWER CONFIGURATION.
6. CONNECTOR SHEILD TIED TO BRAIDED CABLE SHIELD.
C5
7. GOLD SHALL BE .000030" MIN GOLD PER MIL-G-45204B, CLASS 1, TO BE MEASURED IN CONTACT AREA.
8. NICKEL SHALL BE .000080" MIN PER QQ-N-290, CLASS 1, MEASURED ON SHELL.
9. NOTE DELETED.
10. NOTE DELETED.
11. HDRL-11 IS TO BE CENTERED ON CABLE AS SHOWN.
HDRL-11 IS TO CONTAIN: PART NUMBER, SHOP ORDER,
& DATE CODE.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
TOLERANCES ARE:
DECIMALS
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.X: .3 [.01]
.XX: .13 [.005]
.XXX: .051 [.002]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
SHEET SCALE: 1:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
HDMI SHIELDED TWISTED PAIR CABLE ASSY
OVERMOLD: PVC (UL94 V-0)
PREMOLD: PE (UL94 V-0)
CONNECTOR: LCP (UL94 V-0)
CABLE: (VW-1)
DWG. NO.
HPSTP-XX-XXXX-XX-XX
John Riley 2/23/2006
SHEET 1 OF 7
BY:
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
FIG. 3 HPSTP-19-XXXX-SL-SL SHOWN
FIG. 2 HPSTP-29-XXXX-S-S SHOWN
REVISION Q
02
18
01
19
2
1
28
01
29
LENGTH 1%
(SEE PART CALLOUT)
6.50 .256
30.84 1.214
REF (TYP)
OVERMOLD
19
10.42 .410 REF
2.62 .103 REF
0.45 .018 REF
'B'
SUB-MHDMC-19-X
14.00 .551 MAX
5.25 .207
'C'
J1
J2
DETAIL 'A'
DETAIL 'C'
(LATCHING OPTION ONLY)
FIG. 4
'A'
HPSTP-19-XXXX-ML-ML SHOWN
(SHIELDED TWISTED PAIR ONLY)
8.40 .331 MAX
2.42 .095 REF
DETAIL 'B'
19
18
02
(NON-LATCHING)
5.25 .207
01
J2
20.3[.799] .045 REF
(HPSTP-19-XXXX-M-M SHOWN)
10.9[.429] .045 REF
FIG. 5
HPSTP-19-XXXX-M-S SHOWN
DETAIL 'B'
(SAME AS FIG. 1 AND FIG. 4, DIFFERENT AS SHOWN)
(SHIELDED TWISTED PAIR ONLY)
(LATCHING)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
(HPSTP-19-XXXX-ML-ML SHOWN)
HPSTP-XX-XXXX-XX-XX
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
BY:
John Riley 2/23/2006
SHEET 2 OF 7
REVISION Q
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
HPSTP-XX-XXXX-XX-XX
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
BY:
John Riley 2/23/2006
SHEET 3 OF 7
REVISION Q
SUB-HDMIP-XX-01
STPC-XX-02-XXXX
SUB-HDMIP-XX-01
COPPER FOIL
COPPER FOIL
2
1
C2
"A"
(SEE TABLE 1)
C1
ASSEMBLY LENGTH ±1%
19
18
1
2:1 SCALE
FOR CLARITY
2:1 SCALE
FOR CLARITY
FIG 1. HPSTP-19-XXXX-01 SHOWN
(-S-S OPTION ONLY)
"L" (REF)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
HPSTP-XX-XXXX-XX-XX
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
BY:
John Riley 2/23/2006
SHEET 4 OF 7
HPSTP-XX-XXXX-XX-XX
19.00 .748
19.05 .750
REVISION Q
1.40 .055
3.60 .142
JACKET
BRAID SHIELD
TWISTED PAIR SHIELD
INNER CONDUCTOR
DIELECTRIC
STRIP DIMS
SUB-HDMIP-XX-01
STPC-XX-02-XXXX
SUB-HDMIP-XX-01
'D'
HEAT SHRINK TUBE (TYP)
(AFTER SHRINKING)
02
18
01
PIN 1
19
01
18
02
19
SOLDER TERMINATE CABLE TO PC BOARDS
PIN 1
CABLE LENGTH =
ASSEMBLY LENGTH - 36.5mm[1.44in] ±1%
ASSEMBLY LENGTH ±1%
HEAT SHRINK TUBE
(USE HST-0.078-02-BLK)
FIRST END
SECOND END
IN-PROCESS - STEP 1
(HPSTP-19-XXXX-S-S SHOWN)
6.00 .236
A) SLIDE 6MM HEAT SHRINK TUBE OVER PAIRS AND CONDUCTORS
B) SOLDER CABLE TO PCB
C) PUSH H/S TUBE UP TO PCB AND ACTIVATE (SEE DETAIL)
EPOXY REGION
HEAT SHRINK DETAIL
DETAIL 'D'
SCALE 2 : 1
KEEP EPOXY WITHIN PAD AREA
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
4.00 .157
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
IN-PROCESS - STEP 2
e-Mail: info@SAMTEC.com
(HPSTP-19-XXXX-S-S SHOWN)
DO NOT SCALE DRAWING
DESCRIPTION:
HDMI SHIELDED TWISTED PAIR CABLE ASSY
A) APPLY EPOXY
NHO. PSTP-XX-XXXX-XX-XX
DWG.
B) TRIM BRAID TO 4MM WIDE TAILS ON THIS SIDE ONLY
(DO NOT TRIM LENGTH)
SHEET SCALE: 1:2
BY:
John Riley
11/7/07
SHEET 5 OF 7
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
HPSTP-XX-XXXX-XX-XX
REVISION Q
"K" - .20 (TYP)
PREMOLD
PREMOLD
"G" - .20
(SEE TABLE 2)
IN-PROCESS - STEP 3
"H" (TYP)
CLIP ALIGNMENT TABS (8X)
"M" (TYP)
(HPSTP-19-XXXX-S-S SHOWN)
A) ADD PREMOLD
"J" (TYP)
B) CLIP ALIGNMENT TABS FLUSH WITH PREMOLD (+.010/-.000)
2:1 SCALE
FOR CLARITY
2:1 SCALE
FOR CLARITY
"L" - .20
SUB-HDMIP-XX-01
SUB-HDMIP-XX-01
STPC-XX-02-XXXX
COPPER FOIL
SOLDER BRAID TO FOIL
SOLDER FOIL TO CONNECTOR SHIELD
IN-PROCESS - STEP 4
(HPSTP-19-XXXX-S-S SHOWN)
A) ADD COPPER FOIL OVER PREMOLD
B) TRIM BRAID TO 6MM
C) SOLDER BRAID TO COPPER FOIL AND SOLDER COPPER FOIL TO CONNECTOR
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DO NOT SCALE DRAWING
DESCRIPTION:
HDMI SHIELDED TWISTED PAIR CABLE ASSY
DWG. NO.
HPSTP-XX-XXXX-XX-XX
SHEET SCALE: 1:2
BY:
John Riley 2/23/2006
SHEET 6 OF 7
HPSTP-XX-XXXX-XX-XX
"E" REF (TYP)
(SEE TABLE 1, SHT 1)
REVISION Q
HDRL-11
(SEE NOTE 11)
19
01
18
02
02
18
01
19
C2
"A"
(SEE TABLE 1, SHT 1)
IN-PROCESS STEP 5
(HPSTP-19-XXXX-S-S SHOWN)
ADD OVERMOLD AND LABELS
LABEL-ET
(SEE NOTE 3)
"D" REF
(SEE TABLE 1, SHT 1)
02
01
WHITE (1)
GROUND (1)
YELLOW (1)
GROUND (2)
WHITE (3)
ORANGE (3)
GROUND (4)
WHITE (5)
RED (5)
GROUND (6)
WHITE (7)
BROWN (7)
BROWN (P)
ORANGE (8)
RED (P)
WHITE (2)
GREEN (2)
GROUND (3)
WHITE (4)
BLACK (4)
GROUND (5)
WHITE (6)
BLUE (6)
GROUND (7)
BLACK (P)
PURPLE (P)
YELLOW (8)
GRAY (P)
WHITE (P)
(P) = POWER
(X) = PAIR NUMBER
HPSTP-29-XXXX-S-S SHOWN
02
01
WHITE (1)
BROWN (1)
GROUND (2)
WHITE (3)
RED (3)
GROUND (4)
WHITE (P)
YELLOW (5)
GROUND
RED (P)
GROUND (1)
WHITE (2)
GREEN (2)
GROUND (3)
WHITE (4)
BLUE (4)
PURPLE (P)
ORANGE (5)
PINK (P)
HPSTP-19-XXXX-S-S SHOWN
(P) = POWER
(X) = PAIR NUMBER
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DO NOT SCALE DRAWING
DESCRIPTION:
CUSTOM HDR CABLE ASSEMBLY
DWG. NO.
HPSTP-XX-XXXX-XX-XX
SHEET SCALE: 1:2
BY:
John Riley 2/23/2006
SHEET 7 OF 7
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW
相关型号：
©2020 ICPDF网 联系我们和版权申明