HQCD-060-40.00STR-TEU-3 [SAMTEC]
Interconnection Device, ROHS COMPLIANT;型号: | HQCD-060-40.00STR-TEU-3 |
厂家: | SAMTEC |
描述: | Interconnection Device, ROHS COMPLIANT |
文件: | 总2页 (文件大小:1155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CSF-210
®
(0,50mm) .0197"
(0,80mm) .0315"
EQCD–040–04.00–TTL–STR–2
HQCD, EQCD SERIES
HQCD–030–06.00–TED–TED–1–F
®
Q STRIP COAX CABLE ASSEMBLIES
38 AWG micro ribbon
coax cable
Surface Mount,
Edge Mount or
Panel Mount
HQCD Mates with:
QTH, QSH
SPECIFICATIONS
For complete specifications see
www.samtec.com?HQCD or
www.samtec.com?EQCD
EQCD Mates with:
QTE, QSE
Socket or
Terminal
Cable:
38 AWG micro ribbon
coax cable
FILE NO. E111594
Signal Routing:
50Ω Single-Ended
Overall Length:
(95,3mm) 03.75" to
(1m) 40" standard
Cable Flexing Life:
>10,000 cycles
SCREW MOUNT
APPLICATIONS
(–F, –S, –B)
• Screw & panel
mount options
Cable Bending Radius:
<2,5mm
0,50mm or
0,80mm pitch
• Retention pins
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
Rated @ 7dB Insertion Loss
Cable
300 milliamp max
Cable Propagation Delay:
4.4 nsec/meter
Length
EQCD
HQCD
39.37" (1m)
1.92 GHz / 3.84 Gbps 1.71 GHz / 3.42 Gbps
Operating Temp Range:
-40°C to +105°C
Unmating Force (-RT1 option):
-RT1 option increases
unmating force up to 50%
RoHS Compliant:
Yes
Screw Mount
options
Performance and complete test data available at
www.samtec.com?EQCD, www.samtec.com?HQCD
or contact sig@samtec.com
SO–0318–04–01–02
SO–0165–04–01–02
NO. OF POSITIONS
PER ROW
TYPE
WIRE LENGTH
APPLICATIONS
–“XX.XX”
(12,70)
.500
–030, –060, –090, –120
= Wire Length in Inches
(95,3mm) 03.75" Minimum
(HQCD Series)
HQCD
= (0,50mm) .0197" pitch
–020, –040, –060, –080
(EQCD Series)
(16,56)
.652
EQCD
= (0,80mm) .0315" pitch
(9,28)
.365
OAL = Wire Length + L
Wire Length (1,27) .050
Processing conditions will
affect mated height.
APPLICATION
SPECIFIC
L
END TO END
• Other sizes and lengths
• Other terminations
• Other wire AWG
Surface Mount to
Surface Mount
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
(24,13)
.950
(21,21)
.835
(20,47)
.806
Contact dr@samtec.com
#4-40
Thread
(18,29)
.720
Note:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
(17,55)
.691
(16,81)
.662
Edge Mount (Socket) to
Edge Mount (Socket)
END NO. 1
(–STL SHOWN)
Note:
END NO. 2
(–SEU SHOWN)
Verify part number with
Samtec’s Interactive Cable
Builder at www.samtec.com/
cable_builder/pitch.aspx
Note:
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM
HQCD–030–06.00–STR–TTR–1–B
EQCD–020–40.00–TPU–TTR–1
EQCD–020–06.00–TTR–STR–1–D
RETENTION PIN
APPLICATIONS
(–L, –R, –D)
PANEL MOUNT
END OPTION
APPLICATIONS
(–TPU, –TPD, –SPU, SPD)
Panel Mount
options
Retention pin option
can increase unmating
force up to 50%
#4-40
Thread
END
NO. 1
END
NO. 2
WIRING OPTION
END OPTIONS
Leave blank for no Screw Mount
& Retention End Option
Specify
END ASSEMBLIES
from chart
–1
= Pin 1 to Pin 1
–F
–2
= Screw Mount End No. 1 only
(N/A with XPX options)
= Pin 1 to Pin 2
–3
END 1
–S
= Pin 1 to Second to Last Pin
or
EDGE MOUNT
= Screw Mount End No. 2 only
END 2
Terminal, Edge Mount,
Notch Up
–4
–B
TEU
TED
SEU
SED
= Pin 1 to Last Pin
= Screw Mount Both Ends
(N/A with XPX options)
Terminal, Edge Mount,
Notch Down
END 1
Socket, Edge Mount,
Notch Up
or
SURFACE MOUNT
(N/A on 80 positions EQCD
and 120 position HQCD)
END 2
Socket, Edge Mount,
Notch Down
Terminal, Top Mount,
Notch Right
TTR
TTL
TBR
TBL
–L
= End No. 1 Retention Pin or Socket
Terminal, Top Mount,
Notch Left
–R
Terminal, Bottom Mount,
Notch Right
= End No. 2 Retention Pin or Socket
PANEL MOUNT
END 1
ONLY
(Not available on HQCD 120
position and EQCD 80 positions)
Terminal, Bottom Mount,
Notch Left
–D
= Both Ends Retention Pin or Socket
Socket, Top Mount,
Notch Right,
Terminal, Panel Mount,
Notch Up
TPU
TPD
SPU
SPD
STR
STL
SBR
SBL
–1
Socket, Top Mount,
Notch Left
Terminal, Panel Mount,
Notch Down
= End No. 1 Screw Mount.
End No. 2 Retention Pin or Socket
Socket, Bottom Mount,
Notch Right
Socket, Panel Mount,
Notch Up
–2
Socket, Panel Mount,
Notch Down
Socket, Bottom Mount,
Notch Left
= End No. 1 Retention Pin or Socket.
End No. 2 Screw Mount Option
WWW.SAMTEC.COM
相关型号:
©2020 ICPDF网 联系我们和版权申明