HSEC8-1030-04-L-DV [SAMTEC]
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal;
| 型号： | HSEC8-1030-04-L-DV |
| 厂家： | 
SAMTEC |
| 描述： | Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal 连接器 集管和边缘连接器 |
| 文件： | 总7页 (文件大小：692K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HSEC8-1XXX-XX-XX-DV-X-XX
REVISION AC
DESIGNED & DIMENSIONED
IN MILLIMETERS
OPTION
No OF POSITIONS
-K: POLYIMIDE FILM PAD(SEE FIG 3)
(SEE TABLE 6)
(INCHES FOR REFERENCE ONLY)
-10, -20, & -30 (SEE FIG 1)
**-13, ** -25, ** -37, -40, **-49,
-50, & -60 (SEE FIG 2)
-TR: TAPE & REEL
DO NOT
SCALE FROM
THIS PRINT
(-10 THRU -70 POS ONLY)
(No OF POS x 0.800 [.0315]) + 4.60 [.181] REF
(LEAVE BLANK FOR TRAY)
**-70, **-80, **-90 & **-100 (PER ROW)
**-L: LATCHING OPTION.
(No OF POS x 0.800 [.0315]) + 1.40[.055] REF
NOT AVAILABLE FOR -GR TYPE USE
(USE HSEC8-XX-01-DV-A-L)
(AVAILABLE IN **-13, **-25, **-37 & **-49
POS ONLY) (SEE SHEET 3, FIG 4)
**-L2: ECDP LATCHING OPTION.
NOT AVAILABLE FOR -GR
C
CARD THICKNESS
(SEE NOTE 6 & 7)
2.70 .11
REF
(No OF POS -1 ) x 0.800 [.0315]
C
PLATING SPECIFICATION
USE (USE HSEC8-XX-01-DV-A-L)
(AVAILABLE IN **-26, **-50, **-74 & **-98
POS ONLY) (SEE SHEET 7, FIG 9)
**-BL: BOARD LOCK OPTION.
NOT AVAILABLE FOR -GR TYPE USE
(USE HSEC8-XXX-01-DV-XX-BL)
(SEE SHEET 4, FIG 5)
0.800±0.05 .0315±.002
(TOL NON ACCUM)
60
-SM: SELECTIVE GOLD/MATTE TIN TAIL
02
(USE C-188-01-S)
"A"
-H: HEAVY GOLD/FLASH GOLD TAIL
(USE C-188-01-H)
C
L
-S: SELECTIVE GOLD/MATTE TIN TAIL
(USE C-188-01-S)
**-GR: GUIDE RAILS
NOT AVAILABLE FOR
-L: LIGHT SELECTIVE GOLD/MATTE TIN TAIL
"P" REF
"Q" REF
"T" REF
(USE C-188-01-L)
-L; -BL TYPE USE (SEE SHEET 5, FIG 6)
(USE HSEC8-XXX-01-DV-XX-GR)
(PACKAGING -TR ONLY)
ROW SPECIFICATION
**-PE: PASS THROUGH
(AVAILABLE IN -10, -13 & -20 POS ONLY)
(ONLY AVAILABLE WITH -A OPTION)
(SEE SHEET 6, FIG 7)
01
59
"A"
-WT: WELD TABS (-A OPTION REQUIRED)
(SEE SHEET 6, FIG 8)
C
C
L
"V" 0.10
POSITION #1
INDICATOR
SEE TABLE 5
OPTION
-A: ALIGNMENT PINS
"W" REF
(USE HSEC8X-XXX-XX-DV-A)
(LEAVE BLANK FOR NO -A &
USE HSEC8X-XXX-XX-DV-LC)
2.92 .11
REF
3.03 .12
REF
7.80 .31
** = AVAILABLE ONLY WITH
-01 CARD THICKNESS
C
REF
C-188-01-XX
7.98±0.15 .314±.006
(TYP)
C
SEE TABLE 1
3.60 .14
REF
1.32 .05 REF
(2 PLCS)
2.03 .08 REF
"Y" 0.20
1.12 .04 REF (TYP)
C
L
C
(No OF POS x 0.800[.0315]) + 2.200[.0866] REF
1.50 .06
REF
SECTION "A"-"A"
C
L
C
0.80±0.05 .0315±.002
(TOL NON ACCUM)
C
NOTES:
((No OF POS -1 ) x 0.800 [.0315]) 0.08[.003]
* = NOT RELEASED FOR PRODUCTION
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
C
1.
REPRESENTS A CRITICAL DIMENSION.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
PROPRIETARY NOTE
3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FIG 1
4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP.
5. ASSEMBLIES TO BE PACKAGED IN TRAYS.
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FOR POSITIONS -10, -20 & -30
DECIMALS
ANGLES
2
(SHOWN: HSEC8-130-01-XX-D-DV-A)
6. CARD THICKNESS OPTION
.X: .3 [.01]
.XX: .13 [.005]
.XXX: .051 [.0020]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
-01:1.57mm[.062] THICK CARD USE HSEC8-XXX-01-DV-XX
-02: 2.00mm[.079] THICK CARD USE HSEC8A-XXX-02-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
-03: 2.36mm[.093] THICK CARD USE HSEC8A-XXX-03-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
*-04: 3.18mm[.125] THICK CARD USE HSEC8A-XXX-04-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP,
0.8mm HIGH SPEED ASSEMBLY
NO.
COLOR: -01 CARD THICKNESS BLACK,
DWG. HSEC8-1XXX-XX-XX-DV-X-XX
-02 THU -04 CARD THICKNESS NATURAL
CONTACT: BeCu
7. MATING EDGE CARD THICKNESS TOLERANCE TO BE ±10% OF NOMINAL.
SHEET 1 OF 7
BY:
BRATCHER 01/24/03
FIG 3
-K OPTION
REVISION AC
"R"
(No OF POS x 0.800[.0315]) + 7.80[.307] REF
"D" REF
"S"
"A"
2.70 .11
REF
02
"K"
"H"
120
01
119
0.800 .0315
C
(TOL NON-ACCUM)
4.00 .16
C
"B" SPACES @ .800 = "C"
C
(No OF POS + 3) x 0.800[.0315]
((No OF POS + 6) x 0.800[.0315]) + 0.60[.024] REF
13.83±0.15 .54±.006
"U" 0.13
C
L
IN-PROCESS
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
FIG 2
PROPRIETARY NOTE
FOR POSITIONS **-13, **-25, **-37,
-40, **-49, -50, -60, **-70, **-80, **-90, **-100
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A)
(** = AVAILABLE ONLY WITH
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
-01 CARD THICKNESS)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.25:1
0.8mm HIGH SPEED ASSEMBLY
DWG.
HSNEOC. 8-1XXX-XX-XX-DV-X-XX
BRATCHER 01/24/03
SHEET 2 OF 7
BY:
REVISION AC
(No OF POS x 0.80[.0315]) + 18.40[.724] REF
"D"
"C"
HSEC8-XX-01-DV-A-L
"C"
"D"
WT-25-02-T
7.74 .30 REF
1.59 .06
5.19 .20
C
0.64 .03 REF
(No OF POS x 0.80[.0315]) + 14.90[.587]
C
2
MAX SWAY
SECTION "D"-"D"
SECTION "C"-"C"
(EITHER DIRECTION)
FIG 4
PROPRIETARY NOTE
**-L: LATCHING OPTION
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
NOT AVAILABLE FOR -GR TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-137-01-XX-DV-A-L)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
DESCRIPTION:
0.8mm HIGH SPEED ASSEMBLY
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
DWG. NO.
HSEC8-1XXX-XX-XX-DV-X-XX
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BY:
BRATCHER 01/24/03
SHEET 3 OF 7
REVISION AC
"E" REF
"F"
"H"
"H"
"E"
"E"
"F"
C
1.33±0.5 .05±.020
LTC-04
+0.5
+.020
.08
-.031
2.10
-0.8
HSEC8-XXX-01-DV-XX-BL
WT-25-02-T
12.04 .47
REF
7.74 .30
REF
C
1.50 .06
C
"F"
0.64 .03
REF
2
MAX SWAY
SECTION "H"-"H"
SECTION "E"-"E"
SCALE 2.5 : 1
(EITHER DIRECTION)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
FIG 5
**-BL: BOARD LOCK OPTION
NOT AVAILABLE FOR -GR TYPE USE
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A-BL)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
0.8mm HIGH SPEED ASSEMBLY
DWG. NO.
SECTION "F"-"F"
SCALE 2.5 : 1
HSEC8-1XXX-XX-XX-DV-X-XX
SHEET 4 OF 7
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BY:
BRATCHER 01/24/03
REVISION AC
0.70 .028 REF
2.30 .091 REF
4.40 .173
REF
4.60 .181
REF
1.75 .069 REF
"J"
11.75 .463
REF
"J"
SECTION "J"-"J"
FIG 6
**-GR: GUIDE RAILS OPTION
AVAILABLE IN -10, -20, -30, -40, -50, & -60 POSITIONS ONLY
NOT AVAILABLE FOR -L; -BL TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A-GR)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
0.8mm HIGH SPEED ASSEMBLY
DWG. NO.
HSEC8-1XXX-XX-XX-DV-X-XX
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BY:
BRATCHER 01/24/03
SHEET 5 OF 7
REVISION AC
(No OF POS x 0.800 [.0315])
+ 7.00 [.236] REF
C
L
"G"
HSEC8-XX-01-DV-A-PE
+0.05
-0.15
+.002
.02
-.006
0.55
SECTION "G"-"G"
"G"
(No OF POS x 0.800[.0315])
+ 3.600[.142] REF
FIG 7
**-PE: PASS THROUGH OPTION
AVAILABLE IN -10, -13 & -20 POSITIONS ONLY
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-120-01-XX-DV-A-PE)
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
"J" REF
"L"
HSEC8-XX-01-DV-A-WT
"L"
7.74 .30
REF
C
1.50 .06
0.64 .03
REF
C
"F"
(SEE TABLE 4, SHT 4)
SECTION "L"-"L"
SCALE 2.5 : 1
** = AVAILABLE ONLY WITH -01
CARD THICKNESS
2
MAX SWAY
(EITHER DIRECTION)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
FIG 8
-WT: WELD TAB OPTION
520 PARK EAST BLVD, NEW ALBANY, IN 47150
AVAILABLE IN ALL POSITIONS
(-A OPTION REQUIRED)
(SAME AS FIG. 5, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A-WT)
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
0.8mm HIGH SPEED ASSEMBLY
DWG. NO.
HSEC8-1XXX-XX-XX-DV-X-XX
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BY:
BRATCHER 01/24/03
SHEET 6 OF 7
REVISION AC
(No. OF POS X 0.80[.031]) + 8.60[.339]
HSEC8-XX-01-DV-A-L
"M"
9.29 .37
"M"
SECTION "M"-"M"
(No. OF POS X 0.80[.031]) + 3.50[.138]
FIG 9
**-L2: ECDP LATCHING OPTION
(AVAILABLE IN **-26, **-50, **-74 & **-98 POS ONLY)
NOT AVAILABLE FOR -GR TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-137-01-XX-DV-A-L2)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
0.8mm HIGH SPEED ASSEMBLY
DWG. NO.
HSEC8-1XXX-XX-XX-DV-X-XX
F:\dwg\misc\mktg\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BY:
BRATCHER 01/24/03
SHEET 7 OF 7
相关型号：
HSEC8-1030-04-SM-DV
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal
SAMTEC
HSEC8-1037-01-H-DV
Card Edge Connector, 74 Contact(s), 2 Row(s), Female, Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1037-01-H-DV-TR
Card Edge Connector, 74 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1037-01-S-DV-BL
Card Edge Connector, 74 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1037-01-S-DV-K
Card Edge Connector, 74 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1037-01-S-DV-K-L
Card Edge Connector, 74 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Latch, Black Insulator, Plug
SAMTEC
HSEC8-1037-01-SM-DV-A-K-TR
Card Edge Connector, 74 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1040-01-H-DV-A-K-BL
Card Edge Connector, 80 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1040-01-H-DV-A-TR-BL
Card Edge Connector, 80 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1040-01-H-DV-K-TR-L
Card Edge Connector, 80 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Latch, Black Insulator, Plug
SAMTEC
HSEC8-1040-01-H-DV-TR
Card Edge Connector, 80 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
SAMTEC
HSEC8-1040-01-S-DV-A-K-TR-L
Card Edge Connector, 80 Contact(s), 2 Row(s), Straight, 0.031 inch Pitch, Surface Mount Terminal, Latch, Black Insulator, Plug
SAMTEC
©2020 ICPDF网 联系我们和版权申明