HTSW-102-08-G-D-LA [SAMTEC]
CONN HEADER 4POS .1" T/H GOLD;
| 型号： | HTSW-102-08-G-D-LA |
| 厂家： | 
SAMTEC |
| 描述： | CONN HEADER 4POS .1" T/H GOLD |
| 文件： | 总7页 (文件大小：687K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION BQ
HTSW-XXX-XX-XXX-X-XX-XX-XX
TERMINAL SPACE SPEC
OPTION 3
-1= .100 [2.54] (FILL EVERY POSITION)
-2= .200 [5.08] (FILL EVERY OTHER
POSITION STARTING WITH THE 1st
AND ENDING WITH THE LAST
POSITION IN BODY)
DO NOT
SCALE FROM
THIS PRINT
*-MW: METAL WASHER
(STRAIGHT TAIL OPTION ONLY)
(AVAILABLE ON 05, 06, 07. 08. 16, 17, 18,
22, 23,24, 25, 41 & 42 LEAD STYLES ONLY)
(N/A WITH -LC OPTION. 20 POS MIN, 30 POS MAX.
SEE FIG 6, SHT 5)
NUMBER OF POSITIONS PER ROW
-1: -01 THRU -50
OPTION 2
"A"= NUMBER OF POS x .100[2.54]
-2: -02 THRU -25
-POLARIZING SPECIFICATION
XXX INDICATES POS TO BE OMITTED
"A"= (NUMBER OF POS x .200[5.08])-.100[2.54]
LEAD STYLE
SEE TABLE 1, SHT 6
OPTION 1
-BLANK: STRAIGHT (SEE FIG 1, SHT 2)
-RA: RIGHT ANGLE (SEE TABLE 3 & 4, FIG 5, SHT 4)(-RA OPTION WITH -LL
OPTION EQUALS TO -LA OPTION)
PLATING SPECIFICATIONS
-G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-RE: EXTENDED RIGHT ANGLE (SEE TABLE 3 & 4, FIG 5, SHT 4)
(SINGLE ROW ONLY)
-T: MATTE TIN CONTACT AND TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL
(AVAILABLE ON LEAD STYLES -07, -08, -09 STRAIGHT AND -08-D-RA)
-TL: TIN/LEAD (90/10 5%) CONTACT AND TAIL,
-NA: RA OPTION WITH STRAIGHT OPTION BODY (SEE TABLE 3 & 4, FIG 5, SHT 4)
(-NA OPTION WITH -LL OPTION IS VALID)
-NE: RE OPTION WITH STRAIGHT OPTION BODY (SEE TABLE 3 & 4, FIG 5, SHT 4)
-LC: LOCKING CLIP (4 POS MINIMUM; ONLY AVAILABLE ON:
LEAD STYLES -08 THRU -13 & -22, WITH ROW OPTIONS -S & -D;
N/A WITH -MW, -RA OR -RE OPTIONS; SEE FIG 2, SHT 2)
-LA: -RA OPTION WITH -LL OPTION (SEE SHT 3)
-LL: LOCKING LEAD (SEE FIG 4, SHT 3)
(AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09)
-TM: MATTE TIN CONTACT AND TAIL
(N/A WITH -RE OR -NE OPTIONS)
(N/A IN SINGLE ROW, 1 OR 2 POSITIONS)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 5%) TAIL
-LTL: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL,
(AVAILABLE ONLY ON LEAD STYLE -15)
ROW SPECIFICATION (SEE TABLE 2)
-S: SINGLE
-D: DOUBLE
-T: TRIPLE
-Q: TRIPLE ROW, FILL OUTER ROWS ONLY
-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ONTAIL, (SEE NOTE 9)
* - MW OPTION, DO NOT DESIGN IN. SAMTEC WILL
ONLY SUPPORT EXISTING BUSINESS 2/12/02.
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE
ASSEMBLY OPERATION
IN-PROCESS INSPECTION
FILL
C1
C2
C4
C5
C6
C7
MULTI-CUT
RIGHT ANGLE
RIGHT ANGLE
RIGHT ANGLE
CRIMP
NOTES:
CPCs INTENTIONALLY DELETED:
C3
C
1.
REPRESENTS CRITICAL DIMENSION FOR STATISTICAL PROCESS CONTROL.
2. MINIMUM TERMINAL PUSHOUT FORCE: 3 LBS.
3. MAXIMUM HEIGHT VARIATION: .005[.127] (N/A ON -RA TAIL).
4. ASSEMBLE GOLD PLATE END AS SHOWN IN FIG 1.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
*
*
DECIMALS
ANGLES
5. STYLE -26: ROUND END OF PIN TO APPEAR ON BOTTOM (SEE FIG 7, SHT 6).
6. MINIMUM GOLD PLATED CONTACT AREA: .165[4.19] REF; PINS -18, -21 & -25: .050[1.27] REF.
7. CRIMP TWO PINS CLOSEST TO CENTER OF THE PART IF THERE IS A POLARIZED POSITION
IN THE MIDDLE/CENTER.
.XX: .01 [.25]
2
.XXX: .005 [.13]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXXX: .0020 [.051]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
e-Mail info@SAMTEC.com
8. MAXIMUM CUT FLASH: .010 [.25].
SHEET SCALE: 3.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
9. -SS PLATING OPTION ONLY AVAILABLE ON -07, -08, -09 STRAIGHT AND -08 -RA LEAD
STYLES. MATES WITH SSQ, SSW, SSM, BCS, ESQ & ESW.
10. MEASURE FROM THE BEND RADIUS OF THE TERMINALS.
11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING IN THE POST AREA.
(SEE TABLE 6, SHT 7).
INSULATOR: LCP, UL-94-V-0
COLOR: NATURAL
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-XXX-XX-XXX-X-XX-XX-XX
SHEET 1 OF 7
BY:
PURVIS
02/17/87
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
REVISION BQ
+.005
-.015
+0.127
"A"
-0.381
C
"A"
(SEE CALLOUT)
TERMINAL SPACING
-1XX= .100[2.54]
-2XX= .200[5.08]
.200 5.08
.100 2.54
C
2
MAX SWAY
"C" .008[0.20]
(SEE TABLE 1, SHT 6)
(SEE NOTE 3)
(EITHER DIRECTION)
2
MAX SWAY
.025 0.64 SQ REF
(EITHER DIRECTION)
.200 5.08
.100 2.54
MINIMUM GOLD PLATED
CONTACT LENGTH
(SEE NOTE 6)
"L" REF
(SEE TABLE 1, SHT 6)
.100 2.54
REF
.198 5.03
.0980 2.489 REF
.298 7.57
REF
.298 7.57
REF
SEE NOTE 5
REF
2
MAX SWAY
2
MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
-S
-D
-T
-Q
FIG 1
HTSW-110-07-XXX-D SHOWN
"G" REF
.596 15.15
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
"F"
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
FIG 2: LOCKING CLIP
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-110-07-XXX-D-LC SHOWN
(DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 1)
HTSW-XXX-XX-XXX-X-XX-XX-XX
PURVIS
02/17/87
SHEET 2 OF 7
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
FIG 3
REVISION BQ
TERMINAL SPACING
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
50
01
03
01
02
01
03
C
C
L
L
-S
-D
-T
-Q
-S
-T
-Q
-D
02
STRAIGHT VERSION
ODD POSITIONS
STRAIGHT VERSION
EVEN POSITIONS
99
148
150
01
100
148
150
-Q
(FILL OUTER ROWS ONLY)
-T
-1 = .100 TERMINAL SPACING
-S
-D
01
04
03
01
03
02
25
01
04
03
C
L
02
01
-T
-Q
-S
-D
49
50
73
75
RIGHT ANGLE VERSION
73
75
ODD POSITIONS
-S
-D
-T
-Q
(FILL OUTER ROWS ONLY)
-2 = .200[5.08] TERMINAL SPACING
C
L
FIG 4
-LL: LOCKING LEAD
(NOTE: END VIEWS SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
-T
-Q
-D
-S
SEE CRIMP DETAIL
RIGHT ANGLE VERSION
EVEN POSITIONS
.017 0.43
-LL:LOCKING LEAD
= CRIMP LOCATION
TWO CENTER MOST PINS TO BE CRIMPED AS SHOWN.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
C
.04 1.0
(TYP)
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.0080 0.203
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
CRIMP DETAIL
SCALE: 2x
[TYP- ALL CRIMPS]
-S
-LC-LL
-D
-LL
-D
-LC-LL
-S
-LL
-T
-LL
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
NO.
DWGH. TSW-XXX-XX-XXX-X-XX-XX-XX
PURVIS
02/17/87
SHEET 3 OF 7
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
REVISION BQ
C
L
C
L
PIN #1
PIN #3
2
MAX SWAY
C
C
L
L
2
MAX SWAY
PIN #2
PIN #2
PIN #1
(EITHER DIRECTION)
(EITHER DIRECTION)
2
MAX SWAY
2
MAX SWAY
PIN #1
(EITHER DIRECTION)
(EITHER DIRECTION)
PIN #1
C
C
C
L
L
L
PIN #3
C
L
C
C
C
90°
(TYP)
90°(TYP)
90° (TYP)
C
90° (TYP)
.04 1.0
.04 1.0
.04 1.0
.04 1.0
.06 1.5
'D'
.06 1.5
C
.100 2.54 (TYP)
(SEE NOTE 10)
.100 2.54 (TYP)
(SEE NOTE 10)
.06 1.5
C
"E" REF
C
.120 3.05
REF
.200 5.08 (TYP)
(SEE NOTE 10)
"E" REF
.200 5.08 (TYP)
(SEE NOTE 10)
C
.240 6.10
REF
SINGLE -RA / -RE
"E" REF
"E" REF
DOUBLE -RA
.320 8.13 REF
.320 8.13 REF
TRIPLE -RA
FIG 5
QUAD -RA
-RA: RIGHT ANGLE
(-LA OPTION IS SHOWN ON ALL -RA VIEWS
FOR DIMENSIONAL PURPOSES)
(SEE CRIMP DETAIL VIEW, SHT 3)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
TABLE 3
"D"
-XX
-RA / -NA
-RE / -NE
.06 [1.5]
.16 [4.1]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-XXX-XX-XXX-X-XX-XX-XX
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
PURVIS
02/17/87
SHEET 4 OF 7
REVISION BQ
# - MW OPTION, DO NOT DESIGN IN. SAMTEC WILL
ONLY SUPPORT EXISTING BUSINESS 2/12/02.
.003 0.08 MAX
.005 0.13 MAX
ESQ-04-MW-T
-S
-D
FIG 6
*-MW: METAL WASHER
(ONE PER POSITION)
PT-1-24-01-22
PT-1-24-07-51
PT-1-24-08-03
PT-1-24-03-29
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
PT-1-24-01-63
PT-1-24-02-04
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-XXX-XX-XXX-X-XX-XX-XX
SHEET 5 OF 7
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
PURVIS
02/17/87
REVISION BQ
.025 0.64
REF(TYP)
.018 0.46
REF(TYP)
FIG 7
-26 LEAD STYLE
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(1) WITH -RA or -RE OPTION
(5) AVAILABLE IN -LL OPTION.
(2) OMIT WITH -Q ROW SPECIFICATION
(3) NOT AVAILABLE IN -RA OR -RE OPTION.
(4) NOT AVAILABLE IN -RE OPTION.
(6) AVAILABLE IN -LA OPTION.
(7) ON STYLE -08 -RA & -LA
OPTIONS ONLY; 'C' = .230+.005/-.008 [5.84+.13/-.20]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
*SQUARE END OF PIN(T-1RS7-01-XXX-2)SHOULD BE LOCATED AT "C" DIMENSION DURING FILL PROCESS.
(SEE FIG 7)
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3.5:1
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-XXX-XX-XXX-X-XX-XX-XX
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
PURVIS
02/17/87
SHEET 6 OF 7
REVISION BQ
POST AREA
BANDOLIER (REF)
TAIL AREA
IN PROCESS 1
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
-T PLATING ONLY
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.025 SQ POST HI-TEMP TERMINAL STRIP ASSEMBLY
DWG. NO.
HTSW-XXX-XX-XXX-X-XX-XX-XX
F:\DWG\MISC\MKTG\HTSW-XXX-XX-XXX-X-XX-XX-XX-MKT.SLDDRW
BY:
PURVIS
02/17/87
SHEET 7 OF 7
相关型号：
HTSW-102-08-G-D-RA
Board Connector, 4 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
SAMTEC
HTSW-102-08-G-Q
Board Connector, 4 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
SAMTEC
HTSW-102-08-G-Q-RA
Board Connector, 4 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
SAMTEC
HTSW-102-08-G-S
Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Natural Insulator, Receptacle, LEAD FREE
SAMTEC
HTSW-102-08-H-D-RA
Board Connector, 4 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal,
SAMTEC
HTSW-102-08-L-D
Board Connector, 4 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, LEAD FREE
SAMTEC
HTSW-102-08-L-D-RA
Board Connector, 4 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明