IDSD-36-D-05.00-G-R [SAMTEC]
Cable Assembly,;型号: | IDSD-36-D-05.00-G-R |
厂家: | SAMTEC |
描述: | Cable Assembly, |
文件: | 总2页 (文件大小:1298K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
F-219
IDMD–24–D–12.00–G
(2.54 mm) .100"
SLIM BODY FLAT RIBBON IDC CABLES
Mates with:
SPECIFICATIONS
TYPE
STRIP
ROW
NO. PINS
PER ROW
END
TSW, MTSW, TSM, EJH,
PHT, HMTSW, HTSW,
HW, DW, EW, ZW, MTLW
OPTION
ASSEMBLY
For complete specifications
see www.samtec.com?IDSS,
www.samtec.com?IDSD,
www.samtec.com?IDMS or
www.samtec.com?IDMD
IDSD Mates with:
TST, HTST, ZST,
BST, EJH
Single
=
–S
End
S
Insulator Material:
Black Glass Filled Polyester
Plating:
= Single
Au over 50 µ" (1.27 µm) Ni or
Sn over 100 µ" (2.54 µm) Cu
or 50 µ" (1.27 µm) Ni
Wire:
D
= Double
(Color coded
cable N/A for
31 thru 36
pins/row.
See –G
IDM
28 AWG 7/36 stranded
Tinned Copper
= Standard Tail Male Plug
Temperature Range:
-20 °C to +105 °C
(Rainbow Cable)
-40 °C to +105 °C
(Gray Cable)
Contact (IDSS/IDSD):
BeCu
Socket or Male Plug on one end
IDS
option.)
= Socket
Double
=
–D
End
Terminal (IDMS/IDMD):
Phosphor Bronze
Current Rating (IDSD/TST):
3.4 A per pin
(2 pins powered)
Current Rating (IDMD):
3 A per pin
–02 thru –32
DOUBLE
Full size (64 positions):
(82.55) 3.250
IDMD
IDMS
(Single)
(2 pins powered)
Lead Size Range:
(0.56 mm) .022" SQ to
(0.71 mm) .028" SQ
Lead Insertion Depth:
(5.59 mm) .220" to
(6.22 mm) .245"
Less than 64 positions:
(Double)
No. Positions/row X (2.54) .100 + (1.68) .066
Socket or Male Plug on each end
SINGLE
Full size (32 positions):
(81.53) 3.210
Less than 32 positions:
No. Positions/row X (2.54) .100 + (0.71) .028
(2.54)
.100
(5.08)
.200
Transfer
=
–T
End
RoHS Compliant:
Yes
(6.10)
.240
MAX
RECOGNITIONS
(0.48)
.019
(3.18)
.125
For complete scope
of recognitions see
www.samtec.com/quality
Male Plug on one end with socket on
other. Begin part number with IDM.
(2.54)
.100
(0.46)
(2.54)
.100
.018
x
(0.48)
.019
(For square or long tail see HCMX Series)
FILE NO. E111594
OTHER SOLUTIONS
–02 thru –36
Molded-To-Position
IDC Assemblies
• Low profile
DOUBLE
Full size (72 positions):
• Skinny side locks
• Dual beam contacts
• Single and double row
• (3.05 mm) .120"
and (5.84 mm) .230"
length tail
(92.71) 3.650
Less than 72 positions:
IDSD
(Double)
IDSS
(Single)
No. Positions/row x (2.54) .100 + (1.50) .059
SINGLE
Full size (36 positions):
(91.69) 3.610
Less than 36 positions:
(5.08)
.200
No. Positions/row x (2.54) .100 + (0.48) .019
available
(9.27)
.365
REF
(0.76)
.030
SQ
(2.54)
.100
(2.54)
.100
Note:
This Series is non-standard,
non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
IDSD–05–D–04.25–S02
IDSD–24–S–05.00
IDSS, IDSD, IDMS, IDMD SERIES
EJECTOR HEADERS
& LOCKING CLIPS
ASSEMBLED
LENGTH
OPTION
IDSS or IDSD
STRIP ASSEMBLY
• Ejector headers
• Locking clips
– “XX.XX”
POLARIZING KEY
LOCKING
CLIP
= Assembled Length
.025" SQ
TERMINAL
STRIP (TSW)
(0.64) .025
SQ
Optional polarizing key for
use with IDSS & IDSD
Series. Also polarizes
SSW, SSQ, ESW & ESQ
Series. Black High
PC
BOARD
Assembled Length in
INCHES ( 1/8")
(2 inches minimum)
(5.84)
.230
See TSW Series.
Temperature Thermoplastic
Order: Part Number PK-01-06
(Available in wheels of six each)
See EJH Series.
Tin Plating
=
–T
–ST “X”
–S “XX”
–R
(Both ends)
= Stripped & Tinned
= Daisy Chain Single
= Reversed
Tin IDM
10 µ" (0.25 µm) Gold IDS
(-T End Assembly Required)
Specify Suffix from table.
All dimensions are 1/16".
Not available in 28 positions and higher.
2"
min.
–C
“XX” 1⁄8"
=
Single Row
Connectors
(IDSS)
10 µ" (0.25 µm) Gold IDM
Tin IDS
(-T End Assembly Required)
–A =
Outer Most
Standard plating is selective
gold over BeCu contact for IDS;
Selective gold over phosphor
bronze for IDM.
4" minimum
When mating double row
connector with two single row
connectors, the outer most
single will be connected to
Conductor #1 and the inside
single to Conductor #2.
8
1
1/8" (3.18)
–ST8
–ST4
–ST2
–ST3
1/4" (6.35)
–M
= Middle Reversed
1/2" (12.70)
–P “XX”
=Polarized
3/8" (9.53)
4
7
72
04 02
–D “XX”
–B “XX”
= Daisy Chain, Double
= Breakout
71
03 01
Specify “XX” as number of
conductors to be broken out.
2"
min.
“XX” 1⁄8"
Specify “XX” as position. For
Double the same position will
be polarized on both ends.
(Not available on IDM unless
transfer, then only the socket
is polarized.)
Requires –SXX, –WXX or –DXX
Double Row
Connectors
(IDSD or
8
IDMD)
–O
Outer Most
2
“XX”
= Outside Reversed
4" minimum
–G
5"max.
2"min.
7
= Gray Cable
Breakout starts with
Number 1 lead indicated
Specify –G for Gray cable. Gray
cable has one red edge. IDSS
and IDMS uses .100" centerline
cable. IDSD and IDMD uses
.050" centerline cable. Cable is
28 AWG 7/36 copper wire.
Standard cable is same as
above except color coded.
–W “XX”
by brown wire or red stripe.
Shown on top side.
= Wiring Reversed
Daisy Chain, Single
5
–RW
Same as –S “XX” except outer
strip connected to Conductor
#2 and inside strip connected
to Conductor #1.
= Reversed Wiring
Requires –SXX, –WXX or –DXX
#1 wire opposite position #1.
6
8
3
7
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
相关型号:
©2020 ICPDF网 联系我们和版权申明