LJHSG-02-8P8C-N-S3-G-3-A [SAMTEC]
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal;
| 型号： | LJHSG-02-8P8C-N-S3-G-3-A |
| 厂家： | 
SAMTEC |
| 描述： | Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal |
| 文件： | 总3页 (文件大小：514K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION A
LJHSG-XX-8P8C-X-XX-X-X-X
NO. OF PORTS
-02: 2 PORTS
-04: 4 PORTS
OPTION
DO NOT
SCALE FROM
THIS PRINT
-A: ALIGMENT PINS (SEE SHT 2, FIG.2)
LEAVE BLANK FOR NO ALIGNMENT PINS
FIG. 1
LED2
-G: GREEN
-Y: YELLOW
PLATING SPECIFICATION
-N: NICKEL
(LJHSG-02-8P8C-N-S3 SHOWN)
SHIELD STYLE
-S3: SHIELDED, 3 SIDED PANEL FLANGE
-1: GREEN/ORANGE
-2: YELLOW/ORANGE
-3: GREEN/RED
LED1
-4: YELLOW/RED
-G: GREEN
-5GREEN/YELLOW
-6: YELLOW/GREEN
(LEAVE BLANK FOR NO LED)
(SEE TABLE 1 FOR CODES)
-Y: YELLOW
-1: GREEN/ORANGE
-2: YELLOW/ORANGE
-3: GREEN/RED
-4: YELLOW/RED
-5: GREEN/YELLOW
-6: YELLOW/GREEN
(LEAVE BLANK FOR NO LED)
(NO LED 1 REQUIRES NO LED 2)
(SEE TABLE 1 FOR CODES)
"A" REF
C
C
C
SH9-XX-N
"B"±.010
.602±.010 15.30±0.254
LATCH MUST SNAP
INTO PLACE
.645 16.38
.553 14.03
C
.126 3.20
"A"
"A"
.058 1.46
REF
.025 0.64
REF
.140 3.56 REF
.310 7.87 REF
"C" REF
WT-34-01-T
C
.443 11.25
.025 0.64
REF
MODM-LJ-XX
.346 8.79
.701 17.81
C
.499 12.69
SECTION "A"-"A"
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
.XXXX: .0020 [.051]
e-Mail: info@SAMTEC.com
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
NOTES:
MULTIPLE PORT SLED HOUSING ASSM
DWG. NO.
C
1.
REPRESENTS A CRITICAL DIMENSION.
INSULATOR: VECTRA E130
SHIELD: 260 BRASS, 3/4 HARD
WELD TAB: 260 BRASS, FULL HARD
F:\DWG\MISC\MKTG\LJHSG-XX-8P8C-X-XX-X-X-X-MKT.SLDDRW
2. BURR ALLOWANCE: .0015[.038] MAX.
3. PARTS TO BE TRAY PACKAGED.
4. WELD TAB RETENTION: .5 LBS
5. LED RETENTION: .5 LBS
LJHSG-XX-8P8C-X-XX-X-X-X
SHEET 1 OF 3
BY:
B RAY
11-7-2007
FIG. 4
REVISION A
(LJHSG-02-8P8C-N-S3-X-X SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
FIG. 2
(LJHSG-02-8P8C-N-S3-A SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
LED 2
.017 0.43
"B"
SH9-XX-N-L
LED-XX-01-H
C
L
C
.103±.010 2.62±0.254
C
"B"
.062 1.57 REF
(TO BOTTOM OF A-PIN)
.540 13.72
2
MAX SWAY (TYP)
LED 1
C
MODM-LJ-02-A
.340 8.64
C
L
C
.600 15.23
.531 13.47
REF
.070 1.78
REF
SECTION "B"-"B"
.583 14.81
REF (TYP)
FIG. 3
(LJHSG-04-8P8C-N-S3-A SHOWN)
(SAME AS FIG. 2, DIFFERENT AS SHOWN)
C
L
MODM-LJ-04-A
C
C
L
L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.583 14.81 REF
DESCRIPTION:
.645 16.38 REF
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
MULTIPLE PORT SLED HOUSING ASSM
DWG. NO.
LJHSG-XX-8P8C-X-XX-X-X-X
B RAY 11-7-2007
.645 16.38 REF
.583 14.81 REF
SHEET 2 OF 3
F:\DWG\MISC\MKTG\LJHSG-XX-8P8C-X-XX-X-X-X-MKT.SLDDRW
BY:
REVISION A
C
.790±.100 20.07±2.54
.402 10.20
REF
90°
IN-PROCESS 2
FORM LED
(LJHSG-XX-8P8C-X-S3-X-X-X ONLY)
'C'
'D'
IN-PROCESS 1
FILL LED
.035 0.88
(LJHSG-XX-8P8C-X-S3-X-X-X ONLY)
.015 0.38
R.030 0.76
60°
C
.103±.010 2.62±0.254
DETAIL 'C'
SCALE 7 : 1
.004[.10] MAX BURR
DETAIL 'D'
SCALE 7 : 1
IN-PROCESS 4
SHEAR LED
(LJHSG-XX-8P8C-X-S3-X-X-X ONLY)
IN-PROCESS 3
HEAT STAKE
(LJHSG-XX-8P8C-X-S3-X-X-X ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
.646 16.41
REF
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
IN-PROCESS 6
FILL SHIELD
PHONE: 812-944-6733
FAX: 812-948-5047
code: 55322
e-Mail: info@SAMTEC.com
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
(FOR ALL PART NUMBERS)
MULTIPLE PORT SLED HOUSING ASSM
DWG. NO.
IN-PROCESS 5
FILL WELD TAB
.126 3.20
LJHSG-XX-8P8C-X-XX-X-X-X
C
(FOR ALL PART NUMBERS)
SHEET 3 OF 3
F:\DWG\MISC\MKTG\LJHSG-XX-8P8C-X-XX-X-X-X-MKT.SLDDRW
BY:
B RAY
11-7-2007
相关型号：
LJHSG-02-8P8C-N-S3-G-4
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-G-6
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-G-6-A
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-G-G
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-G-Y
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-G-Y-A
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-Y-1
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-Y-1-A
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-Y-2-A
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-02-8P8C-N-S3-Y-Y
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-04-8P8C-N-S3-1-1-A
Telecom and Datacom Connector, 32 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
LJHSG-04-8P8C-N-S3-1-3
Telecom and Datacom Connector, 32 Contact(s), Female, Right Angle, Solder Terminal
SAMTEC
©2020 ICPDF网 联系我们和版权申明